From: Ben Widawsky <ben@bwidawsk.net>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org,
Ben Widawsky <benjamin.widawsky@intel.com>
Subject: Re: [PATCH] [v2] drm/i915: s/HAS_L3_GPU_CACHE/HAS_L3_DPF
Date: Thu, 19 Sep 2013 12:59:16 -0700 [thread overview]
Message-ID: <20130919195916.GA2063@bwidawsk.net> (raw)
In-Reply-To: <20130919184154.GB32145@phenom.ffwll.local>
On Thu, Sep 19, 2013 at 08:41:55PM +0200, Daniel Vetter wrote:
> On Thu, Sep 19, 2013 at 11:01:40AM -0700, Ben Widawsky wrote:
> > We'd only ever used this define to denote whether or not we have the
> > dynamic parity feature (DPF) and never to determine whether or not L3
> > exists. Baytrail is a good example of where L3 exists, and not DPF.
> >
> > This patch provides clarify in the code for future use cases which might
> > want to actually query whether or not L3 exists.
> >
> > v2: Add /* DPF == dynamic parity feature */
> >
> > Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
>
> Ok, I've slurped all the kernel patches in. Like I've said I'd very much
> welcome a little testcase to inject an error and exercise this stuff a
> bit, if it's not a horrendous amount of work to get going.
> -Daniel
>
I agree with you. I'm trying to get help from other internal groups to
write that test case, but so far, no luck. It's on my TODO list behind
about 4 other things right now.
> > ---
> > drivers/gpu/drm/i915/i915_drv.h | 5 +++--
> > drivers/gpu/drm/i915/i915_gem.c | 2 +-
> > drivers/gpu/drm/i915/i915_irq.c | 4 ++--
> > drivers/gpu/drm/i915/i915_sysfs.c | 4 ++--
> > drivers/gpu/drm/i915/intel_ringbuffer.c | 6 +++---
> > 5 files changed, 11 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index 015df52..09a5c82 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -1691,8 +1691,9 @@ struct drm_i915_file_private {
> >
> > #define HAS_FORCE_WAKE(dev) (INTEL_INFO(dev)->has_force_wake)
> >
> > -#define HAS_L3_GPU_CACHE(dev) (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
> > -#define NUM_L3_SLICES(dev) (IS_HSW_GT3(dev) ? 2 : HAS_L3_GPU_CACHE(dev))
> > +/* DPF == dynamic parity feature */
> > +#define HAS_L3_DPF(dev) (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
> > +#define NUM_L3_SLICES(dev) (IS_HSW_GT3(dev) ? 2 : HAS_L3_DPF(dev))
> >
> > #define GT_FREQUENCY_MULTIPLIER 50
> >
> > diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> > index 18d07d7..7859f91 100644
> > --- a/drivers/gpu/drm/i915/i915_gem.c
> > +++ b/drivers/gpu/drm/i915/i915_gem.c
> > @@ -4260,7 +4260,7 @@ int i915_gem_l3_remap(struct intel_ring_buffer *ring, int slice)
> > u32 *remap_info = dev_priv->l3_parity.remap_info[slice];
> > int i, ret;
> >
> > - if (!HAS_L3_GPU_CACHE(dev) || !remap_info)
> > + if (!HAS_L3_DPF(dev) || !remap_info)
> > return 0;
> >
> > ret = intel_ring_begin(ring, GEN7_L3LOG_SIZE / 4 * 3);
> > diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> > index 1c7f6ab..cfaf434 100644
> > --- a/drivers/gpu/drm/i915/i915_irq.c
> > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > @@ -960,7 +960,7 @@ static void ivybridge_parity_error_irq_handler(struct drm_device *dev, u32 iir)
> > {
> > drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
> >
> > - if (!HAS_L3_GPU_CACHE(dev))
> > + if (!HAS_L3_DPF(dev))
> > return;
> >
> > spin_lock(&dev_priv->irq_lock);
> > @@ -2292,7 +2292,7 @@ static void gen5_gt_irq_postinstall(struct drm_device *dev)
> > pm_irqs = gt_irqs = 0;
> >
> > dev_priv->gt_irq_mask = ~0;
> > - if (HAS_L3_GPU_CACHE(dev)) {
> > + if (HAS_L3_DPF(dev)) {
> > /* L3 parity interrupt is always unmasked. */
> > dev_priv->gt_irq_mask = ~GT_PARITY_ERROR(dev);
> > gt_irqs |= GT_PARITY_ERROR(dev);
> > diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c
> > index deb8787..7b4c79c 100644
> > --- a/drivers/gpu/drm/i915/i915_sysfs.c
> > +++ b/drivers/gpu/drm/i915/i915_sysfs.c
> > @@ -97,7 +97,7 @@ static struct attribute_group rc6_attr_group = {
> >
> > static int l3_access_valid(struct drm_device *dev, loff_t offset)
> > {
> > - if (!HAS_L3_GPU_CACHE(dev))
> > + if (!HAS_L3_DPF(dev))
> > return -EPERM;
> >
> > if (offset % 4 != 0)
> > @@ -525,7 +525,7 @@ void i915_setup_sysfs(struct drm_device *dev)
> > DRM_ERROR("RC6 residency sysfs setup failed\n");
> > }
> > #endif
> > - if (HAS_L3_GPU_CACHE(dev)) {
> > + if (HAS_L3_DPF(dev)) {
> > ret = device_create_bin_file(&dev->primary->kdev, &dpf_attrs);
> > if (ret)
> > DRM_ERROR("l3 parity sysfs setup failed\n");
> > diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
> > index 958b7d8..b67104a 100644
> > --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> > +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> > @@ -569,7 +569,7 @@ static int init_render_ring(struct intel_ring_buffer *ring)
> > if (INTEL_INFO(dev)->gen >= 6)
> > I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_FORCE_ORDERING));
> >
> > - if (HAS_L3_GPU_CACHE(dev))
> > + if (HAS_L3_DPF(dev))
> > I915_WRITE_IMR(ring, ~GT_PARITY_ERROR(dev));
> >
> > return ret;
> > @@ -997,7 +997,7 @@ gen6_ring_get_irq(struct intel_ring_buffer *ring)
> >
> > spin_lock_irqsave(&dev_priv->irq_lock, flags);
> > if (ring->irq_refcount++ == 0) {
> > - if (HAS_L3_GPU_CACHE(dev) && ring->id == RCS)
> > + if (HAS_L3_DPF(dev) && ring->id == RCS)
> > I915_WRITE_IMR(ring,
> > ~(ring->irq_enable_mask |
> > GT_PARITY_ERROR(dev)));
> > @@ -1019,7 +1019,7 @@ gen6_ring_put_irq(struct intel_ring_buffer *ring)
> >
> > spin_lock_irqsave(&dev_priv->irq_lock, flags);
> > if (--ring->irq_refcount == 0) {
> > - if (HAS_L3_GPU_CACHE(dev) && ring->id == RCS)
> > + if (HAS_L3_DPF(dev) && ring->id == RCS)
> > I915_WRITE_IMR(ring, ~GT_PARITY_ERROR(dev));
> > else
> > I915_WRITE_IMR(ring, ~0);
> > --
> > 1.8.4
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
--
Ben Widawsky, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2013-09-19 19:59 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-18 4:12 [PATCH 1/6] drm/i915: Fix HSW parity test Ben Widawsky
2013-09-18 4:12 ` [PATCH 2/6] drm/i915: Add second slice l3 remapping Ben Widawsky
2013-09-18 7:36 ` Ville Syrjälä
2013-09-18 16:22 ` Ben Widawsky
2013-09-19 18:13 ` [PATCH] [v3] " Ben Widawsky
2013-09-18 4:12 ` [PATCH 3/6] drm/i915: Make l3 remapping use the ring Ben Widawsky
2013-09-19 18:39 ` Daniel Vetter
2013-09-18 4:12 ` [PATCH 4/6] drm/i915: Keep a list of all contexts Ben Widawsky
2013-09-18 4:12 ` [PATCH 5/6] drm/i915: Do remaps for " Ben Widawsky
2013-09-18 7:48 ` Ville Syrjälä
2013-09-19 1:14 ` Ben Widawsky
2013-09-19 1:17 ` Ben Widawsky
2013-09-19 2:03 ` [PATCH] [v3] " Ben Widawsky
2013-09-18 4:12 ` [PATCH 6/6] drm/i915: s/HAS_L3_GPU_CACHE/HAS_L3_DPF Ben Widawsky
2013-09-18 7:50 ` Ville Syrjälä
2013-09-19 17:47 ` [PATCH] [v2] " Ben Widawsky
2013-09-19 18:01 ` Ben Widawsky
2013-09-19 18:41 ` Daniel Vetter
2013-09-19 19:59 ` Ben Widawsky [this message]
2013-09-18 4:12 ` [PATCH 07/14] intel_l3_parity: Fix indentation Ben Widawsky
2013-09-18 4:12 ` [PATCH 08/14] intel_l3_parity: Assert all GEN7+ support Ben Widawsky
2013-09-18 4:12 ` [PATCH 09/14] intel_l3_parity: Use getopt for the l3 parity tool Ben Widawsky
2013-09-18 4:12 ` [PATCH 10/14] intel_l3_parity: Hardware info argument Ben Widawsky
2013-09-18 4:12 ` [PATCH 11/14] intel_l3_parity: slice support Ben Widawsky
2013-09-18 4:12 ` [PATCH 12/14] intel_l3_parity: Actually support multiple slices Ben Widawsky
2013-09-18 4:12 ` [PATCH 13/14] intel_l3_parity: Support error injection Ben Widawsky
2013-09-18 4:12 ` [PATCH 14/14] intel_l3_parity: Support a daemonic mode Ben Widawsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130919195916.GA2063@bwidawsk.net \
--to=ben@bwidawsk.net \
--cc=benjamin.widawsky@intel.com \
--cc=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox