public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Chon Ming Lee <chon.ming.lee@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 1/2] drm/i915: Send a DPIO cmnreset during driver load or system resume.
Date: Tue, 24 Sep 2013 18:18:15 +0300	[thread overview]
Message-ID: <20130924151815.GF4531@intel.com> (raw)
In-Reply-To: <1380006867-20771-1-git-send-email-chon.ming.lee@intel.com>

On Tue, Sep 24, 2013 at 03:14:27PM +0800, Chon Ming Lee wrote:
> Without the DPIO cmnreset, the PLL fail to lock.  This should have
> done by BIOS.
> 
> v2: Move this to intel_uncore_sanitize to allow it to get call during
> resume path. (Daniel)
> v3: Remove redundant write 0 to DPIO_CTL, and use DPIO_RESET instead of
> just 0x1 (Ville)
>     Without BIOS, DPIO/render well/media well may still power gated.
> Turn it off.
> 
> Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h     |    9 +++++++++
>  drivers/gpu/drm/i915/intel_uncore.c |   23 +++++++++++++++++++++++
>  2 files changed, 32 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index c4f9bef..c02f893 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -361,6 +361,15 @@
>  #define PUNIT_OPCODE_REG_READ			6
>  #define PUNIT_OPCODE_REG_WRITE			7
>  
> +#define PUNIT_REG_PWRGT_CTRL			0x60
> +#define PUNIT_REG_PWRGT_STATUS			0x61
> +#define	  PUNIT_CLK_GATE			1
> +#define	  PUNIT_PWR_RESET			2
> +#define	  PUNIT_PWR_GATE			3
> +#define	  RENDER_PWRGT				(PUNIT_PWR_GATE << 0)
> +#define	  MEDIA_PWRGT				(PUNIT_PWR_GATE << 2)
> +#define	  DPIO_PWRGT				(PUNIT_PWR_GATE << 6)

Subsys 6 seems to be one of four TX lanes, and there's also the common
lane subsys, and the disp2d is one as well. RX supposedly is not relevant
for display PHY, not sure why it has subsys allocated too.

Anyways my point would be that shouldn't we check all subsys ie render + media +
disp2d + common lane + all tx lanes?

And should we maybe power gate the RX lanes always as those shouldn't be needed
for display?

> +
>  #define PUNIT_REG_GPU_LFM			0xd3
>  #define PUNIT_REG_GPU_FREQ_REQ			0xd4
>  #define PUNIT_REG_GPU_FREQ_STS			0xd8
> diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
> index 8649f1c..6923b4d 100644
> --- a/drivers/gpu/drm/i915/intel_uncore.c
> +++ b/drivers/gpu/drm/i915/intel_uncore.c
> @@ -276,10 +276,33 @@ static void intel_uncore_forcewake_reset(struct drm_device *dev)
>  
>  void intel_uncore_sanitize(struct drm_device *dev)
>  {
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	u32 reg_val;
> +
>  	intel_uncore_forcewake_reset(dev);
>  
>  	/* BIOS often leaves RC6 enabled, but disable it for hw init */
>  	intel_disable_gt_powersave(dev);
> +
> +	/* Trigger DPIO CMN RESET and turn off power gate, require
> +	 * especially in BIOS less system
> +	 */
> +	if (IS_VALLEYVIEW(dev)) {
> +
> +		mutex_lock(&dev_priv->rps.hw_lock);
> +		reg_val = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS);
> +
> +		if (reg_val & (RENDER_PWRGT | MEDIA_PWRGT | DPIO_PWRGT))
> +			vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, 0x0);
> +
> +		mutex_unlock(&dev_priv->rps.hw_lock);
> +
> +		reg_val = I915_READ(DPIO_CTL);
> +		if (!(reg_val & DPIO_RESET)) {
> +			I915_WRITE(DPIO_CTL, DPIO_RESET);
> +			POSTING_READ(DPIO_CTL);
> +		}
> +	}
>  }
>  
>  /*
> -- 
> 1.7.7.6
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC

  reply	other threads:[~2013-09-24 15:18 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <[PATCH 1/2] drm/i915: Send a DPIO cmnreset during driver load or system resume.>
2013-09-24  7:14 ` [PATCH 1/2] drm/i915: Send a DPIO cmnreset during driver load or system resume Chon Ming Lee
2013-09-24 15:18   ` Ville Syrjälä [this message]
2013-09-24 23:14     ` Lee, Chon Ming
2013-09-25  7:25       ` Ville Syrjälä
2013-10-03 15:16   ` [PATCH] drm/i915/vlv: Turn off power gate for BIOS-less system Chon Ming Lee
2013-10-03 16:34     ` Ville Syrjälä
2013-10-04  8:26       ` Daniel Vetter
     [not found] <[PATCH] drm/i915: Enable VLV to work in BIOS-less system>
2013-09-13  6:39 ` [PATCH 0/2] Enable VLV to work in " Chon Ming Lee
2013-09-13  6:39   ` [PATCH 1/2] drm/i915: Send a DPIO cmnreset during driver load or system resume Chon Ming Lee
2013-09-13 11:43     ` Ville Syrjälä
2013-09-24  9:46     ` Chon Ming Lee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130924151815.GF4531@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=chon.ming.lee@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox