public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 6/9] drm: Add drm_rotation_simplify()
Date: Mon, 14 Oct 2013 16:50:42 +0300	[thread overview]
Message-ID: <20131014135042.GE13047@intel.com> (raw)
In-Reply-To: <1381758410.12668.60.camel@intelbox>

On Mon, Oct 14, 2013 at 04:46:50PM +0300, Imre Deak wrote:
> On Mon, 2013-09-30 at 17:44 +0300, ville.syrjala@linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > 
> > drm_rotation_simplify() can be used to eliminate unsupported rotation
> > flags. It will check if any unsupported flags are present, and if so
> > it will modify the rotation to an alternate form by adding 180 degrees
> > to rotation angle, and flipping the reflect x and y bits. The hope is
> > that this identity transform will eliminate the unsupported flags.
> > 
> > Of course that might not result in any more supported rotation, so
> > the caller is still responsible for checking the result afterwards.
> > 
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> >  drivers/gpu/drm/drm_crtc.c | 30 ++++++++++++++++++++++++++++++
> >  include/drm/drm_crtc.h     |  2 ++
> >  2 files changed, 32 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> > index 0218681..665b807 100644
> > --- a/drivers/gpu/drm/drm_crtc.c
> > +++ b/drivers/gpu/drm/drm_crtc.c
> > @@ -3976,6 +3976,36 @@ int drm_format_vert_chroma_subsampling(uint32_t format)
> >  EXPORT_SYMBOL(drm_format_vert_chroma_subsampling);
> >  
> >  /**
> > + * drm_rotation_simplify() - Try to simplify the rotation
> > + * @rotation: Rotation to be simplified
> > + * @supported_rotations: Supported rotations
> > + *
> > + * Attempt to simplify the rotation to a form that is supported.
> > + * Eg. if the hardware supports everything except DRM_REFLECT_X
> > + * one could call this function like this:
> > + *
> > + * drm_rotation_simplify(rotation, BIT(DRM_ROTATE_0) |
> > + *                       BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_180) |
> > + *                       BIT(DRM_ROTATE_270) | BIT(DRM_REFLECT_Y));
> > + *
> > + * to eliminate the DRM_ROTATE_X flag. Depending on what kind of
>                       ^ DRM_REFLECT_X
> 
> You don't use this function in your patchset, though
> intel_plane_set_property() could use it by accepting REFLECT_X|REFLECT_Y
> too. But it does what it says, so I'm also ok if you leave it unused for
> now.

Yeah I was going back and forth whether I should accept the reflect
flags, but in the end decided against it since we can only support
a limited combination of the flags. But the function could be useful
for someone else.

> 
> --Imre
> 
> > + * transforms the hardware supports, this function may not
> > + * be able to produce a supported transform, so the caller should
> > + * check the result afterwards.
> > + */
> > +unsigned int drm_rotation_simplify(unsigned int rotation,
> > +				   unsigned int supported_rotations)
> > +{
> > +	if (rotation & ~supported_rotations) {
> > +		rotation ^= BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y);
> > +		rotation = (rotation & ~0xf) | BIT((ffs(rotation & 0xf) + 1) % 4);
> > +	}
> > +
> > +	return rotation;
> > +}
> > +EXPORT_SYMBOL(drm_rotation_simplify);
> > +
> > +/**
> >   * drm_mode_config_init - initialize DRM mode_configuration structure
> >   * @dev: DRM device
> >   *
> > diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> > index d25ba84..b97b367 100644
> > --- a/include/drm/drm_crtc.h
> > +++ b/include/drm/drm_crtc.h
> > @@ -1154,5 +1154,7 @@ extern int drm_format_vert_chroma_subsampling(uint32_t format);
> >  extern const char *drm_get_format_name(uint32_t format);
> >  extern struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
> >  							      unsigned int supported_rotations);
> > +extern unsigned int drm_rotation_simplify(unsigned int rotation,
> > +					  unsigned int supported_rotations);
> >  
> >  #endif /* __DRM_CRTC_H__ */
> 



-- 
Ville Syrjälä
Intel OTC

  reply	other threads:[~2013-10-14 13:50 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-30 14:44 [PATCH 0/9] drm/i915: Plane rotation support ville.syrjala
2013-09-30 14:44 ` [PATCH 1/9] drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h ville.syrjala
2013-09-30 14:44 ` [PATCH 2/9] drm: Add support_bits parameter to drm_property_create_bitmask() ville.syrjala
2013-09-30 14:44 ` [PATCH 3/9] drm: Add drm_mode_create_rotation_property() ville.syrjala
2013-09-30 14:44 ` [PATCH 4/9] drm/omap: Switch omapdrm over to drm_mode_create_rotation_property() ville.syrjala
2013-09-30 14:44 ` [PATCH 5/9] drm: Add drm_rect rotation functions ville.syrjala
2013-09-30 14:44 ` [PATCH 6/9] drm: Add drm_rotation_simplify() ville.syrjala
2013-10-14 13:46   ` [Intel-gfx] " Imre Deak
2013-10-14 13:50     ` Ville Syrjälä [this message]
2013-09-30 14:44 ` [PATCH 7/9] drm/i915: Add 180 degree sprite rotation support ville.syrjala
2013-10-01 13:22   ` [PATCH v2 " ville.syrjala
2013-09-30 14:44 ` [PATCH 8/9] drm/i915: Make intel_plane_restore() return an error ville.syrjala
2013-09-30 14:44 ` [PATCH 9/9] drm/i915: Add rotation property for sprites ville.syrjala
2013-10-14 13:59   ` Imre Deak
2013-10-14 14:39     ` Ville Syrjälä
2013-10-14 15:10       ` Imre Deak
2013-09-30 16:15 ` [PATCH 0/9] drm/i915: Plane rotation support Rob Clark
2013-09-30 17:09   ` Ville Syrjälä
2013-09-30 17:46     ` Rob Clark
2013-09-30 18:21       ` Daniel Vetter
2013-09-30 18:36         ` Ville Syrjälä
2013-09-30 18:31       ` Ville Syrjälä

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131014135042.GE13047@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox