[PATCH 00/11] Enabling 180 degree rotation for sprite and crtc planes

[PATCH 00/11] Enabling 180 degree rotation for sprite and crtc planes

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

With these patches 180 degree rotation for crtc and sprite planes will be
exposed through drm rotation properties implemented by Ville few days back.
I have added CRTC rotation support on top of Ville's 9 patches that includes
sprite rotation. Omapdrm changes, rotation_simplify, drm_rect functions are
also included in this list. Functionality has been tested with i-g-t test
"intel_plane_rotate".


Sagar Kamble (11):
  drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h
  drm: Add drm_mode_create_rotation_property()
  drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()
  drm: Add drm_rotation_simplify()
  drm/i915: Add 180 degree sprite rotation support
  drm/i915: Make intel_plane_restore() return an error
  drm/i915: Add rotation property for sprites
  drm: Add support_bits parameter to drm_property_create_bitmask()
  drm: Add drm_rect rotation functions
  drm/i915: Add 180 degree primary plane rotation support
  drm: Set property to return invalid for unsupported arguments for
    bitmask property

 drivers/gpu/drm/drm_crtc.c           |  72 +++++++++++++++++-
 drivers/gpu/drm/drm_rect.c           | 140 +++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_drv.h      |   1 +
 drivers/gpu/drm/i915/i915_reg.h      |   4 +
 drivers/gpu/drm/i915/intel_display.c |  54 +++++++++++++-
 drivers/gpu/drm/i915/intel_drv.h     |   5 +-
 drivers/gpu/drm/i915/intel_sprite.c  |  90 ++++++++++++++++++++--
 drivers/gpu/drm/omapdrm/omap_drv.h   |   7 --
 drivers/gpu/drm/omapdrm/omap_plane.c |  17 ++---
 include/drm/drm_crtc.h               |  16 +++-
 include/drm/drm_rect.h               |   6 ++
 11 files changed, 382 insertions(+), 30 deletions(-)

-- 
1.8.5

[PATCH 01/11] drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

The rotation property stuff should be standardized among all drivers.
Move the bits to drm_crtc.h from omap_drv.h.

Signed-off-by: Ville Syrjala <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/omapdrm/omap_drv.h | 7 -------
 include/drm/drm_crtc.h             | 8 ++++++++
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
index 428b2981..aac8e10 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.h
+++ b/drivers/gpu/drm/omapdrm/omap_drv.h
@@ -119,13 +119,6 @@ struct omap_drm_private {
 	struct omap_drm_irq error_handler;
 };
 
-/* this should probably be in drm-core to standardize amongst drivers */
-#define DRM_ROTATE_0	0
-#define DRM_ROTATE_90	1
-#define DRM_ROTATE_180	2
-#define DRM_ROTATE_270	3
-#define DRM_REFLECT_X	4
-#define DRM_REFLECT_Y	5
 
 #ifdef CONFIG_DEBUG_FS
 int omap_debugfs_init(struct drm_minor *minor);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 71727b6..d5c46c1 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -65,6 +65,14 @@ struct drm_object_properties {
 	uint64_t values[DRM_OBJECT_MAX_PROPERTY];
 };
 
+/* rotation property bits */
+#define DRM_ROTATE_0	0
+#define DRM_ROTATE_90	1
+#define DRM_ROTATE_180	2
+#define DRM_ROTATE_270	3
+#define DRM_REFLECT_X	4
+#define DRM_REFLECT_Y	5
+
 /*
  * Note on terminology:  here, for brevity and convenience, we refer to connector
  * control chips as 'CRTCs'.  They can control any type of connector, VGA, LVDS,
-- 
1.8.5

[PATCH 02/11] drm: Add drm_mode_create_rotation_property()

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

Add a function to create a standards compliant rotation property.

Signed-off-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/drm_crtc.c | 18 ++++++++++++++++++
 include/drm/drm_crtc.h     |  2 ++
 2 files changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 3b7d32d..87744d6 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -4114,3 +4114,21 @@ void drm_mode_config_cleanup(struct drm_device *dev)
 	idr_destroy(&dev->mode_config.crtc_idr);
 }
 EXPORT_SYMBOL(drm_mode_config_cleanup);
+
+struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
+						       unsigned int supported_rotations)
+{
+	static const struct drm_prop_enum_list props[] = {
+		{ DRM_ROTATE_0,   "rotate-0" },
+		{ DRM_ROTATE_90,  "rotate-90" },
+		{ DRM_ROTATE_180, "rotate-180" },
+		{ DRM_ROTATE_270, "rotate-270" },
+		{ DRM_REFLECT_X,  "reflect-x" },
+		{ DRM_REFLECT_Y,  "reflect-y" },
+	};
+
+	return drm_property_create_bitmask(dev, 0, "rotation",
+					   props, ARRAY_SIZE(props),
+					   supported_rotations);
+}
+EXPORT_SYMBOL(drm_mode_create_rotation_property);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index d5c46c1..b7d0f3c 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1182,6 +1182,8 @@ extern int drm_format_plane_cpp(uint32_t format, int plane);
 extern int drm_format_horz_chroma_subsampling(uint32_t format);
 extern int drm_format_vert_chroma_subsampling(uint32_t format);
 extern const char *drm_get_format_name(uint32_t format);
+extern struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
+							      unsigned int supported_rotations);
 
 /* Helpers */
 static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
-- 
1.8.5

[PATCH 03/11] drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

Use the new drm_mode_create_rotation_property() in omapdrm.

Signed-off-by: Ville Syrjala <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/omapdrm/omap_plane.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
index 046d5e6..fee8f35 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -300,16 +300,13 @@ void omap_plane_install_properties(struct drm_plane *plane,
 	if (priv->has_dmm) {
 		prop = priv->rotation_prop;
 		if (!prop) {
-			const struct drm_prop_enum_list props[] = {
-					{ DRM_ROTATE_0,   "rotate-0" },
-					{ DRM_ROTATE_90,  "rotate-90" },
-					{ DRM_ROTATE_180, "rotate-180" },
-					{ DRM_ROTATE_270, "rotate-270" },
-					{ DRM_REFLECT_X,  "reflect-x" },
-					{ DRM_REFLECT_Y,  "reflect-y" },
-			};
-			prop = drm_property_create_bitmask(dev, 0, "rotation",
-					props, ARRAY_SIZE(props));
+			prop = drm_mode_create_rotation_property(dev,
+								 BIT(DRM_ROTATE_0) |
+								 BIT(DRM_ROTATE_90) |
+								 BIT(DRM_ROTATE_180) |
+								 BIT(DRM_ROTATE_270) |
+								 BIT(DRM_REFLECT_X) |
+								 BIT(DRM_REFLECT_Y));
 			if (prop == NULL)
 				return;
 			priv->rotation_prop = prop;
-- 
1.8.5

[PATCH 04/11] drm: Add drm_rotation_simplify()

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

drm_rotation_simplify() can be used to eliminate unsupported rotation
flags. It will check if any unsupported flags are present, and if so
it will modify the rotation to an alternate form by adding 180 degrees
to rotation angle, and flipping the reflect x and y bits. The hope is
that this identity transform will eliminate the unsupported flags.

Of course that might not result in any more supported rotation, so
the caller is still responsible for checking the result afterwards.

Signed-off-by: Ville Syrjala <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/drm_crtc.c | 30 ++++++++++++++++++++++++++++++
 include/drm/drm_crtc.h     |  3 +++
 2 files changed, 33 insertions(+)

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 87744d6..b0a2889 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -4002,6 +4002,36 @@ int drm_format_vert_chroma_subsampling(uint32_t format)
 EXPORT_SYMBOL(drm_format_vert_chroma_subsampling);
 
 /**
+ * drm_rotation_simplify() - Try to simplify the rotation
+ * @rotation: Rotation to be simplified
+ * @supported_rotations: Supported rotations
+ *
+ * Attempt to simplify the rotation to a form that is supported.
+ * Eg. if the hardware supports everything except DRM_REFLECT_X
+ * one could call this function like this:
+ *
+ * drm_rotation_simplify(rotation, BIT(DRM_ROTATE_0) |
+ *                       BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_180) |
+ *                       BIT(DRM_ROTATE_270) | BIT(DRM_REFLECT_Y));
+ *
+ * to eliminate the DRM_ROTATE_X flag. Depending on what kind of
+ * transforms the hardware supports, this function may not
+ * be able to produce a supported transform, so the caller should
+ * check the result afterwards.
+ */
+unsigned int drm_rotation_simplify(unsigned int rotation,
+				   unsigned int supported_rotations)
+{
+	if (rotation & ~supported_rotations) {
+		rotation ^= BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y);
+		rotation = (rotation & ~0xf) | BIT((ffs(rotation & 0xf) + 1) % 4);
+	}
+
+	return rotation;
+}
+EXPORT_SYMBOL(drm_rotation_simplify);
+
+/**
  * drm_mode_config_init - initialize DRM mode_configuration structure
  * @dev: DRM device
  *
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index b7d0f3c..5a6c345 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1184,6 +1184,9 @@ extern int drm_format_vert_chroma_subsampling(uint32_t format);
 extern const char *drm_get_format_name(uint32_t format);
 extern struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
 							      unsigned int supported_rotations);
+extern unsigned int drm_rotation_simplify(unsigned int rotation,
+					  unsigned int supported_rotations);
+
 
 /* Helpers */
 static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
-- 
1.8.5

[PATCH 05/11] drm/i915: Add 180 degree sprite rotation support

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

The sprite planes (in fact all display planes starting from gen4)
support 180 degree rotation. Add the relevant low level bits to the
sprite code to make use of that feature.

The upper layers are not yet plugged in.

Signed-off-by: Ville Syrjala<ville.syrjala@linux.intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h     |  3 +++
 drivers/gpu/drm/i915/intel_drv.h    |  1 +
 drivers/gpu/drm/i915/intel_sprite.c | 34 ++++++++++++++++++++++++++++++++++
 3 files changed, 38 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index abd18cd..57906c5 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3637,6 +3637,7 @@
 #define   DVS_YUV_ORDER_UYVY	(1<<16)
 #define   DVS_YUV_ORDER_YVYU	(2<<16)
 #define   DVS_YUV_ORDER_VYUY	(3<<16)
+#define   DVS_ROTATE_180	(1<<15)
 #define   DVS_DEST_KEY		(1<<2)
 #define   DVS_TRICKLE_FEED_DISABLE (1<<14)
 #define   DVS_TILED		(1<<10)
@@ -3707,6 +3708,7 @@
 #define   SPRITE_YUV_ORDER_UYVY		(1<<16)
 #define   SPRITE_YUV_ORDER_YVYU		(2<<16)
 #define   SPRITE_YUV_ORDER_VYUY		(3<<16)
+#define   SPRITE_ROTATE_180		(1<<15)
 #define   SPRITE_TRICKLE_FEED_DISABLE	(1<<14)
 #define   SPRITE_INT_GAMMA_ENABLE	(1<<13)
 #define   SPRITE_TILED			(1<<10)
@@ -3780,6 +3782,7 @@
 #define   SP_YUV_ORDER_UYVY		(1<<16)
 #define   SP_YUV_ORDER_YVYU		(2<<16)
 #define   SP_YUV_ORDER_VYUY		(3<<16)
+#define   SP_ROTATE_180			(1<<15)
 #define   SP_TILED			(1<<10)
 #define _SPALINOFF		(VLV_DISPLAY_BASE + 0x72184)
 #define _SPASTRIDE		(VLV_DISPLAY_BASE + 0x72188)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 44067bc..85864fc 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -397,6 +397,7 @@ struct intel_plane {
 	unsigned int crtc_w, crtc_h;
 	uint32_t src_x, src_y;
 	uint32_t src_w, src_h;
+	unsigned int rotation;
 
 	/* Since we need to change the watermarks before/after
 	 * enabling/disabling the planes, we need to store the parameters here
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 336ae6c..f9c8c41 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -60,6 +60,7 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 	sprctl &= ~SP_PIXFORMAT_MASK;
 	sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
 	sprctl &= ~SP_TILED;
+	sprctl &= ~SP_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_YUYV:
@@ -131,6 +132,14 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 							fb->pitches[0]);
 	linear_offset -= sprsurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		sprctl |= SP_ROTATE_180;
+
+		x += src_w;
+		y += src_h;
+		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+	}
+
 	I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]);
 	I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x);
 
@@ -238,6 +247,7 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	sprctl &= ~SPRITE_RGB_ORDER_RGBX;
 	sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
 	sprctl &= ~SPRITE_TILED;
+	sprctl &= ~SPRITE_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
@@ -299,6 +309,14 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 					       pixel_size, fb->pitches[0]);
 	linear_offset -= sprsurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		sprctl |= SPRITE_ROTATE_180;
+
+		x += src_w;
+		y += src_h;
+		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+	}
+
 	I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
 	I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
 
@@ -422,6 +440,7 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	dvscntr &= ~DVS_RGB_ORDER_XBGR;
 	dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
 	dvscntr &= ~DVS_TILED;
+	dvscntr &= ~DVS_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
@@ -478,6 +497,14 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 					       pixel_size, fb->pitches[0]);
 	linear_offset -= dvssurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		dvscntr |= DVS_ROTATE_180;
+
+		x += src_w;
+		y += src_h;
+		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+	}
+
 	I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
 	I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
 
@@ -739,6 +766,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	max_scale = intel_plane->max_downscale << 16;
 	min_scale = intel_plane->can_scale ? 1 : (1 << 16);
 
+	drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
+			intel_plane->rotation);
+
 	hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
 	BUG_ON(hscale < 0);
 
@@ -777,6 +807,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 				     drm_rect_width(&dst) * hscale - drm_rect_width(&src),
 				     drm_rect_height(&dst) * vscale - drm_rect_height(&src));
 
+		drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
+				    intel_plane->rotation);
+
 		/* sanity check to make sure the src viewport wasn't enlarged */
 		WARN_ON(src.x1 < (int) src_x ||
 			src.y1 < (int) src_y ||
@@ -1141,6 +1174,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 
 	intel_plane->pipe = pipe;
 	intel_plane->plane = plane;
+	intel_plane->rotation = BIT(DRM_ROTATE_0);
 	possible_crtcs = (1 << pipe);
 	ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs,
 			     &intel_plane_funcs,
-- 
1.8.5

Re: [PATCH 05/11] drm/i915: Add 180 degree sprite rotation support

[Ville Syrjälä]

On Sat, Feb 01, 2014 at 12:40:41AM +0530, sagar.a.kamble@intel.com wrote:
> From: Sagar Kamble <sagar.a.kamble@intel.com>
> 
> The sprite planes (in fact all display planes starting from gen4)
> support 180 degree rotation. Add the relevant low level bits to the
> sprite code to make use of that feature.
> 
> The upper layers are not yet plugged in.
> 
> Signed-off-by: Ville Syrjala<ville.syrjala@linux.intel.com>
> Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>

I actually posted a v2 of this patch, which fixes HSW. But I guess now
we really need a v3 which extends that fix for BDW. Assuming BDW is like
HSW here.

> ---
>  drivers/gpu/drm/i915/i915_reg.h     |  3 +++
>  drivers/gpu/drm/i915/intel_drv.h    |  1 +
>  drivers/gpu/drm/i915/intel_sprite.c | 34 ++++++++++++++++++++++++++++++++++
>  3 files changed, 38 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index abd18cd..57906c5 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3637,6 +3637,7 @@
>  #define   DVS_YUV_ORDER_UYVY	(1<<16)
>  #define   DVS_YUV_ORDER_YVYU	(2<<16)
>  #define   DVS_YUV_ORDER_VYUY	(3<<16)
> +#define   DVS_ROTATE_180	(1<<15)
>  #define   DVS_DEST_KEY		(1<<2)
>  #define   DVS_TRICKLE_FEED_DISABLE (1<<14)
>  #define   DVS_TILED		(1<<10)
> @@ -3707,6 +3708,7 @@
>  #define   SPRITE_YUV_ORDER_UYVY		(1<<16)
>  #define   SPRITE_YUV_ORDER_YVYU		(2<<16)
>  #define   SPRITE_YUV_ORDER_VYUY		(3<<16)
> +#define   SPRITE_ROTATE_180		(1<<15)
>  #define   SPRITE_TRICKLE_FEED_DISABLE	(1<<14)
>  #define   SPRITE_INT_GAMMA_ENABLE	(1<<13)
>  #define   SPRITE_TILED			(1<<10)
> @@ -3780,6 +3782,7 @@
>  #define   SP_YUV_ORDER_UYVY		(1<<16)
>  #define   SP_YUV_ORDER_YVYU		(2<<16)
>  #define   SP_YUV_ORDER_VYUY		(3<<16)
> +#define   SP_ROTATE_180			(1<<15)
>  #define   SP_TILED			(1<<10)
>  #define _SPALINOFF		(VLV_DISPLAY_BASE + 0x72184)
>  #define _SPASTRIDE		(VLV_DISPLAY_BASE + 0x72188)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 44067bc..85864fc 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -397,6 +397,7 @@ struct intel_plane {
>  	unsigned int crtc_w, crtc_h;
>  	uint32_t src_x, src_y;
>  	uint32_t src_w, src_h;
> +	unsigned int rotation;
>  
>  	/* Since we need to change the watermarks before/after
>  	 * enabling/disabling the planes, we need to store the parameters here
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index 336ae6c..f9c8c41 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -60,6 +60,7 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
>  	sprctl &= ~SP_PIXFORMAT_MASK;
>  	sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
>  	sprctl &= ~SP_TILED;
> +	sprctl &= ~SP_ROTATE_180;
>  
>  	switch (fb->pixel_format) {
>  	case DRM_FORMAT_YUYV:
> @@ -131,6 +132,14 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
>  							fb->pitches[0]);
>  	linear_offset -= sprsurf_offset;
>  
> +	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
> +		sprctl |= SP_ROTATE_180;
> +
> +		x += src_w;
> +		y += src_h;
> +		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
> +	}
> +
>  	I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]);
>  	I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x);
>  
> @@ -238,6 +247,7 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  	sprctl &= ~SPRITE_RGB_ORDER_RGBX;
>  	sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
>  	sprctl &= ~SPRITE_TILED;
> +	sprctl &= ~SPRITE_ROTATE_180;
>  
>  	switch (fb->pixel_format) {
>  	case DRM_FORMAT_XBGR8888:
> @@ -299,6 +309,14 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  					       pixel_size, fb->pitches[0]);
>  	linear_offset -= sprsurf_offset;
>  
> +	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
> +		sprctl |= SPRITE_ROTATE_180;
> +
> +		x += src_w;
> +		y += src_h;
> +		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
> +	}
> +
>  	I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
>  	I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
>  
> @@ -422,6 +440,7 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  	dvscntr &= ~DVS_RGB_ORDER_XBGR;
>  	dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
>  	dvscntr &= ~DVS_TILED;
> +	dvscntr &= ~DVS_ROTATE_180;
>  
>  	switch (fb->pixel_format) {
>  	case DRM_FORMAT_XBGR8888:
> @@ -478,6 +497,14 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  					       pixel_size, fb->pitches[0]);
>  	linear_offset -= dvssurf_offset;
>  
> +	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
> +		dvscntr |= DVS_ROTATE_180;
> +
> +		x += src_w;
> +		y += src_h;
> +		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
> +	}
> +
>  	I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
>  	I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
>  
> @@ -739,6 +766,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  	max_scale = intel_plane->max_downscale << 16;
>  	min_scale = intel_plane->can_scale ? 1 : (1 << 16);
>  
> +	drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
> +			intel_plane->rotation);
> +
>  	hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
>  	BUG_ON(hscale < 0);
>  
> @@ -777,6 +807,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  				     drm_rect_width(&dst) * hscale - drm_rect_width(&src),
>  				     drm_rect_height(&dst) * vscale - drm_rect_height(&src));
>  
> +		drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
> +				    intel_plane->rotation);
> +
>  		/* sanity check to make sure the src viewport wasn't enlarged */
>  		WARN_ON(src.x1 < (int) src_x ||
>  			src.y1 < (int) src_y ||
> @@ -1141,6 +1174,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
>  
>  	intel_plane->pipe = pipe;
>  	intel_plane->plane = plane;
> +	intel_plane->rotation = BIT(DRM_ROTATE_0);
>  	possible_crtcs = (1 << pipe);
>  	ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs,
>  			     &intel_plane_funcs,
> -- 
> 1.8.5

-- 
Ville Syrjälä
Intel OTC

[PATCH 06/11] drm/i915: Make intel_plane_restore() return an error

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

Propagate the error from intel_update_plane() up through
intel_plane_restore() to the caller. This will be used for
rollback purposes when setting properties fails.

Signed-off-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/i915/intel_drv.h    |  2 +-
 drivers/gpu/drm/i915/intel_sprite.c | 14 +++++++-------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 85864fc..7a79b8e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -897,7 +897,7 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob);
 int intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane);
 void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
 			       enum plane plane);
-void intel_plane_restore(struct drm_plane *plane);
+int intel_plane_restore(struct drm_plane *plane);
 void intel_plane_disable(struct drm_plane *plane);
 int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
 			      struct drm_file *file_priv);
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index f9c8c41..11560a6 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -1044,18 +1044,18 @@ out_unlock:
 	return ret;
 }
 
-void intel_plane_restore(struct drm_plane *plane)
+int intel_plane_restore(struct drm_plane *plane)
 {
 	struct intel_plane *intel_plane = to_intel_plane(plane);
 
 	if (!plane->crtc || !plane->fb)
-		return;
+		return 0;
 
-	intel_update_plane(plane, plane->crtc, plane->fb,
-			   intel_plane->crtc_x, intel_plane->crtc_y,
-			   intel_plane->crtc_w, intel_plane->crtc_h,
-			   intel_plane->src_x, intel_plane->src_y,
-			   intel_plane->src_w, intel_plane->src_h);
+	return intel_update_plane(plane, plane->crtc, plane->fb,
+				  intel_plane->crtc_x, intel_plane->crtc_y,
+				  intel_plane->crtc_w, intel_plane->crtc_h,
+				  intel_plane->src_x, intel_plane->src_y,
+				  intel_plane->src_w, intel_plane->src_h);
 }
 
 void intel_plane_disable(struct drm_plane *plane)
-- 
1.8.5

[PATCH 07/11] drm/i915: Add rotation property for sprites

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

Sprite planes support 180 degree rotation. The lower layers are now in
place, so hook in the standard rotation property to expose the feature
to the users.

Signed-off-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h     |  1 +
 drivers/gpu/drm/i915/intel_sprite.c | 42 ++++++++++++++++++++++++++++++++++++-
 2 files changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index fa37dfd..ea2efc3 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1548,6 +1548,7 @@ typedef struct drm_i915_private {
 
 	struct drm_property *broadcast_rgb_property;
 	struct drm_property *force_audio_property;
+	struct drm_property *rotation_property;
 
 	uint32_t hw_context_size;
 	struct list_head context_list;
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 11560a6..d84f2fb 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -1044,6 +1044,30 @@ out_unlock:
 	return ret;
 }
 
+static int intel_plane_set_property(struct drm_plane *plane,
+				    struct drm_property *prop,
+				    uint64_t val)
+{
+	struct drm_i915_private *dev_priv = plane->dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	uint64_t old_val;
+	int ret = -ENOENT;
+
+	if (prop == dev_priv->rotation_property) {
+		/* exactly one rotation angle please */
+		if (hweight32(val & 0xf) != 1)
+			return -EINVAL;
+
+		old_val = intel_plane->rotation;
+		intel_plane->rotation = val;
+		ret = intel_plane_restore(plane);
+		if (ret)
+			intel_plane->rotation = old_val;
+	}
+
+	return ret;
+}
+
 int intel_plane_restore(struct drm_plane *plane)
 {
 	struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -1070,6 +1094,7 @@ static const struct drm_plane_funcs intel_plane_funcs = {
 	.update_plane = intel_update_plane,
 	.disable_plane = intel_disable_plane,
 	.destroy = intel_destroy_plane,
+	.set_property = intel_plane_set_property,
 };
 
 static uint32_t ilk_plane_formats[] = {
@@ -1106,6 +1131,7 @@ static uint32_t vlv_plane_formats[] = {
 int
 intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_plane *intel_plane;
 	unsigned long possible_crtcs;
 	const uint32_t *plane_formats;
@@ -1180,8 +1206,22 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 			     &intel_plane_funcs,
 			     plane_formats, num_plane_formats,
 			     false);
-	if (ret)
+	if (ret) {
 		kfree(intel_plane);
+		goto out;
+	}
+
+	if (!dev_priv->rotation_property)
+		dev_priv->rotation_property =
+			drm_mode_create_rotation_property(dev,
+							  BIT(DRM_ROTATE_0) |
+							  BIT(DRM_ROTATE_180));
+
+	if (dev_priv->rotation_property)
+		drm_object_attach_property(&intel_plane->base.base,
+					   dev_priv->rotation_property,
+					   intel_plane->rotation);
 
+ out:
 	return ret;
 }
-- 
1.8.5

[PATCH 08/11] drm: Add support_bits parameter to drm_property_create_bitmask()

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

Make drm_property_create_bitmask() a bit more generic by allowing the
caller to specify which bits are in fact supported. This allows multiple
callers to use the same enum list, but still create different versions
of the same property with different list of supported bits.

Signed-off-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/drm_crtc.c | 6 +++++-
 include/drm/drm_crtc.h     | 3 ++-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index b0a2889..4f5e408 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -2906,7 +2906,8 @@ EXPORT_SYMBOL(drm_property_create_enum);
 struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
 					 int flags, const char *name,
 					 const struct drm_prop_enum_list *props,
-					 int num_values)
+					 int num_values,
+					 unsigned int supported_bits)
 {
 	struct drm_property *property;
 	int i, ret;
@@ -2918,6 +2919,9 @@ struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
 		return NULL;
 
 	for (i = 0; i < num_values; i++) {
+		if (!(supported_bits & (1 << i)))
+			continue;
+
 		ret = drm_property_add_enum(property, i,
 				      props[i].type,
 				      props[i].name);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 5a6c345..e227e85 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1070,7 +1070,8 @@ extern struct drm_property *drm_property_create_enum(struct drm_device *dev, int
 struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
 					 int flags, const char *name,
 					 const struct drm_prop_enum_list *props,
-					 int num_values);
+					 int num_values,
+					 unsigned int supported_bits);
 struct drm_property *drm_property_create_range(struct drm_device *dev, int flags,
 					 const char *name,
 					 uint64_t min, uint64_t max);
-- 
1.8.5

[PATCH 09/11] drm: Add drm_rect rotation functions

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

Add some helper functions to move drm_rects between different rotated
coordinate spaces. One function does the forward transform and
another does the inverse.

Signed-off-by: Ville Syrjala <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/drm_rect.c | 140 +++++++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_rect.h     |   6 ++
 2 files changed, 146 insertions(+)

diff --git a/drivers/gpu/drm/drm_rect.c b/drivers/gpu/drm/drm_rect.c
index 7047ca0..631f5af 100644
--- a/drivers/gpu/drm/drm_rect.c
+++ b/drivers/gpu/drm/drm_rect.c
@@ -293,3 +293,143 @@ void drm_rect_debug_print(const struct drm_rect *r, bool fixed_point)
 		DRM_DEBUG_KMS("%dx%d%+d%+d\n", w, h, r->x1, r->y1);
 }
 EXPORT_SYMBOL(drm_rect_debug_print);
+
+/**
+ * drm_rect_rotate - Rotate the rectangle
+ * @r: rectangle to be rotated
+ * @width: Width of the coordinate space
+ * @height: Height of the coordinate space
+ * @rotation: Transformation to be applied
+ *
+ * Apply @rotation to the coordinates of rectangle @r.
+ *
+ * @width and @height combined with @rotation define
+ * the location of the new origin.
+ *
+ * @width correcsponds to the horizontal and @height
+ * to the vertical axis of the untransformed coordinate
+ * space.
+ */
+void drm_rect_rotate(struct drm_rect *r,
+		     int width, int height,
+		     unsigned int rotation)
+{
+	struct drm_rect tmp;
+
+	if (rotation & (BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y))) {
+		tmp = *r;
+
+		if (rotation & BIT(DRM_REFLECT_X)) {
+			r->x1 = width - tmp.x2;
+			r->x2 = width - tmp.x1;
+		}
+
+		if (rotation & BIT(DRM_REFLECT_Y)) {
+			r->y1 = height - tmp.y2;
+			r->y2 = height - tmp.y1;
+		}
+	}
+
+	switch (rotation & 0xf) {
+	case BIT(DRM_ROTATE_0):
+		break;
+	case BIT(DRM_ROTATE_90):
+		tmp = *r;
+		r->x1 = tmp.y1;
+		r->x2 = tmp.y2;
+		r->y1 = width - tmp.x2;
+		r->y2 = width - tmp.x1;
+		break;
+	case BIT(DRM_ROTATE_180):
+		tmp = *r;
+		r->x1 = width - tmp.x2;
+		r->x2 = width - tmp.x1;
+		r->y1 = height - tmp.y2;
+		r->y2 = height - tmp.y1;
+		break;
+	case BIT(DRM_ROTATE_270):
+		tmp = *r;
+		r->x1 = height - tmp.y2;
+		r->x2 = height - tmp.y1;
+		r->y1 = tmp.x1;
+		r->y2 = tmp.x2;
+		break;
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL(drm_rect_rotate);
+
+/**
+ * drm_rect_rotate_inv - Inverse rotate the rectangle
+ * @r: rectangle to be rotated
+ * @width: Width of the coordinate space
+ * @height: Height of the coordinate space
+ * @rotation: Transformation whose inverse is to be applied
+ *
+ * Apply the inverse of @rotation to the coordinates
+ * of rectangle @r.
+ *
+ * @width and @height combined with @rotation define
+ * the location of the new origin.
+ *
+ * @width correcsponds to the horizontal and @height
+ * to the vertical axis of the original untransformed
+ * coordinate space, so that you never have to flip
+ * them when doing a rotatation and its inverse.
+ * That is, if you do:
+ *
+ * drm_rotate(&r, width, height, rotation);
+ * drm_rotate_inv(&r, width, height, rotation);
+ *
+ * you will always get back the original rectangle.
+ */
+void drm_rect_rotate_inv(struct drm_rect *r,
+			 int width, int height,
+			 unsigned int rotation)
+{
+	struct drm_rect tmp;
+
+	switch (rotation & 0xf) {
+	case BIT(DRM_ROTATE_0):
+		break;
+	case BIT(DRM_ROTATE_90):
+		tmp = *r;
+		r->x1 = width - tmp.y2;
+		r->x2 = width - tmp.y1;
+		r->y1 = tmp.x1;
+		r->y2 = tmp.x2;
+		break;
+	case BIT(DRM_ROTATE_180):
+		tmp = *r;
+		r->x1 = width - tmp.x2;
+		r->x2 = width - tmp.x1;
+		r->y1 = height - tmp.y2;
+		r->y2 = height - tmp.y1;
+		break;
+	case BIT(DRM_ROTATE_270):
+		tmp = *r;
+		r->x1 = tmp.y1;
+		r->x2 = tmp.y2;
+		r->y1 = height - tmp.x2;
+		r->y2 = height - tmp.x1;
+		break;
+	default:
+		break;
+	}
+
+	if (rotation & (BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y))) {
+		tmp = *r;
+
+		if (rotation & BIT(DRM_REFLECT_X)) {
+			r->x1 = width - tmp.x2;
+			r->x2 = width - tmp.x1;
+		}
+
+		if (rotation & BIT(DRM_REFLECT_Y)) {
+			r->y1 = height - tmp.y2;
+			r->y2 = height - tmp.y1;
+		}
+	}
+}
+EXPORT_SYMBOL(drm_rect_rotate_inv);
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index d128629..26bb55e 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -163,5 +163,11 @@ int drm_rect_calc_vscale_relaxed(struct drm_rect *src,
 				 struct drm_rect *dst,
 				 int min_vscale, int max_vscale);
 void drm_rect_debug_print(const struct drm_rect *r, bool fixed_point);
+void drm_rect_rotate(struct drm_rect *r,
+		     int width, int height,
+		     unsigned int rotation);
+void drm_rect_rotate_inv(struct drm_rect *r,
+			 int width, int height,
+			 unsigned int rotation);
 
 #endif
-- 
1.8.5

[PATCH 10/11] drm/i915: Add 180 degree primary plane rotation support

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

Primary planes support 180 degree rotation. Expose the feature
through rotation drm property.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h      |  1 +
 drivers/gpu/drm/i915/intel_display.c | 54 ++++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_drv.h     |  2 ++
 3 files changed, 55 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 57906c5..d3000c4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3553,6 +3553,7 @@
 #define   DISPPLANE_NO_LINE_DOUBLE		0
 #define   DISPPLANE_STEREO_POLARITY_FIRST	0
 #define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
+#define   DISPPLANE_ROTATE_180			(1<<15)
 #define   DISPPLANE_TRICKLE_FEED_DISABLE	(1<<14) /* Ironlake */
 #define   DISPPLANE_TILED			(1<<10)
 #define _DSPAADDR		(dev_priv->info->display_mmio_offset + 0x70184)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 4d4a0d9..483de59 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2037,6 +2037,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 	unsigned long linear_offset;
 	u32 dspcntr;
 	u32 reg;
+	int pixel_size;
 
 	switch (plane) {
 	case 0:
@@ -2047,6 +2048,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 		return -EINVAL;
 	}
 
+	pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
 	intel_fb = to_intel_framebuffer(fb);
 	obj = intel_fb->obj;
 
@@ -2054,6 +2056,8 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 	dspcntr = I915_READ(reg);
 	/* Mask out pixel format bits in case we change it */
 	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+	dspcntr &= ~DISPPLANE_ROTATE_180;
+
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_C8:
 		dspcntr |= DISPPLANE_8BPP;
@@ -2095,8 +2099,6 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 	if (IS_G4X(dev))
 		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
 
-	I915_WRITE(reg, dspcntr);
-
 	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
 
 	if (INTEL_INFO(dev)->gen >= 4) {
@@ -2109,6 +2111,17 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 		intel_crtc->dspaddr_offset = linear_offset;
 	}
 
+	if (intel_crtc->rotation == BIT(DRM_ROTATE_180)) {
+		dspcntr |= DISPPLANE_ROTATE_180;
+
+		x += (fb->width - 1);
+		y += (fb->height - 1);
+		linear_offset += (fb->height - 1) * fb->pitches[0] +
+                                   fb->width * pixel_size;
+	}
+
+	I915_WRITE(reg, dspcntr);
+
 	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
 		      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
 		      fb->pitches[0]);
@@ -8748,6 +8761,31 @@ free_work:
 	return ret;
 }
 
+static int intel_crtc_set_property(struct drm_crtc *crtc,
+				    struct drm_property *prop,
+				    uint64_t val)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	uint64_t old_val;
+	int ret = -ENOENT;
+
+	if (prop == dev_priv->rotation_property) {
+		/* exactly one rotation angle please */
+		if (hweight32(val & 0xf) != 1)
+			return -EINVAL;
+
+		old_val = intel_crtc->rotation;
+		intel_crtc->rotation = val;
+		ret = dev_priv->display.update_plane(crtc, crtc->fb, 0, 0);
+		if (ret)
+			intel_crtc->rotation = old_val;
+	}
+
+	return ret;
+}
+
 static struct drm_crtc_helper_funcs intel_helper_funcs = {
 	.mode_set_base_atomic = intel_pipe_set_base_atomic,
 	.load_lut = intel_crtc_load_lut,
@@ -10160,6 +10198,7 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
 	.set_config = intel_crtc_set_config,
 	.destroy = intel_crtc_destroy,
 	.page_flip = intel_crtc_page_flip,
+	.set_property = intel_crtc_set_property
 };
 
 static void intel_cpu_pll_init(struct drm_device *dev)
@@ -10288,6 +10327,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 	 */
 	intel_crtc->pipe = pipe;
 	intel_crtc->plane = pipe;
+	intel_crtc->rotation = BIT(DRM_ROTATE_0);
 	if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
 		DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
 		intel_crtc->plane = !pipe;
@@ -10298,6 +10338,16 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 	dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
 	dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
 
+	if (!dev_priv->rotation_property)
+		dev_priv->rotation_property =
+			drm_mode_create_rotation_property(dev,
+							BIT(DRM_ROTATE_0) |
+							BIT(DRM_ROTATE_180));
+	if (dev_priv->rotation_property)
+		drm_object_attach_property(&intel_crtc->base.base,
+					dev_priv->rotation_property,
+					intel_crtc->rotation);
+
 	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
 }
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 7a79b8e..02dfdb6 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -331,6 +331,8 @@ struct intel_crtc {
 	struct drm_crtc base;
 	enum pipe pipe;
 	enum plane plane;
+	unsigned int rotation;
+
 	u8 lut_r[256], lut_g[256], lut_b[256];
 	/*
 	 * Whether the crtc and the connected output pipeline is active. Implies
-- 
1.8.5

Re: [PATCH 10/11] drm/i915: Add 180 degree primary plane rotation support

[Ville Syrjälä]

On Sat, Feb 01, 2014 at 12:40:46AM +0530, sagar.a.kamble@intel.com wrote:
> From: Sagar Kamble <sagar.a.kamble@intel.com>
> 
> Primary planes support 180 degree rotation. Expose the feature
> through rotation drm property.
> 
> Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
> Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h      |  1 +
>  drivers/gpu/drm/i915/intel_display.c | 54 ++++++++++++++++++++++++++++++++++--
>  drivers/gpu/drm/i915/intel_drv.h     |  2 ++
>  3 files changed, 55 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 57906c5..d3000c4 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3553,6 +3553,7 @@
>  #define   DISPPLANE_NO_LINE_DOUBLE		0
>  #define   DISPPLANE_STEREO_POLARITY_FIRST	0
>  #define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
> +#define   DISPPLANE_ROTATE_180			(1<<15)
>  #define   DISPPLANE_TRICKLE_FEED_DISABLE	(1<<14) /* Ironlake */
>  #define   DISPPLANE_TILED			(1<<10)
>  #define _DSPAADDR		(dev_priv->info->display_mmio_offset + 0x70184)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 4d4a0d9..483de59 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2037,6 +2037,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  	unsigned long linear_offset;
>  	u32 dspcntr;
>  	u32 reg;
> +	int pixel_size;
>  
>  	switch (plane) {
>  	case 0:
> @@ -2047,6 +2048,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  		return -EINVAL;
>  	}
>  
> +	pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
>  	intel_fb = to_intel_framebuffer(fb);
>  	obj = intel_fb->obj;
>  
> @@ -2054,6 +2056,8 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  	dspcntr = I915_READ(reg);
>  	/* Mask out pixel format bits in case we change it */
>  	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
> +	dspcntr &= ~DISPPLANE_ROTATE_180;
> +
>  	switch (fb->pixel_format) {
>  	case DRM_FORMAT_C8:
>  		dspcntr |= DISPPLANE_8BPP;
> @@ -2095,8 +2099,6 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  	if (IS_G4X(dev))
>  		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
>  
> -	I915_WRITE(reg, dspcntr);
> -
>  	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
>  
>  	if (INTEL_INFO(dev)->gen >= 4) {
> @@ -2109,6 +2111,17 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  		intel_crtc->dspaddr_offset = linear_offset;
>  	}
>  
> +	if (intel_crtc->rotation == BIT(DRM_ROTATE_180)) {
> +		dspcntr |= DISPPLANE_ROTATE_180;
> +
> +		x += (fb->width - 1);
> +		y += (fb->height - 1);
> +		linear_offset += (fb->height - 1) * fb->pitches[0] +
> +                                   fb->width * pixel_size;
> +	}

This isn't quite right. We need something like:
x += pipe_src_w - 1;
y += pipe_src_h - 1;

That suggests your tests don't check if panning works correctly when
rotated.

I was also going to say we need to do this before stashing the result
into intel_crtc->dspaddr_offset on gen2/3, but it actually looks like
rotation is a gen4+ feature, so this place looks OK for this code.

You've also forgotten to add the rotation bits to
ironlake_update_plane(). That one will need additional HSW/BDW checks
I think.

> +
> +	I915_WRITE(reg, dspcntr);
> +
>  	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
>  		      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
>  		      fb->pitches[0]);
> @@ -8748,6 +8761,31 @@ free_work:
>  	return ret;
>  }
>  
> +static int intel_crtc_set_property(struct drm_crtc *crtc,
> +				    struct drm_property *prop,
> +				    uint64_t val)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	uint64_t old_val;
> +	int ret = -ENOENT;
> +
> +	if (prop == dev_priv->rotation_property) {
> +		/* exactly one rotation angle please */
> +		if (hweight32(val & 0xf) != 1)
> +			return -EINVAL;
> +
> +		old_val = intel_crtc->rotation;
> +		intel_crtc->rotation = val;
> +		ret = dev_priv->display.update_plane(crtc, crtc->fb, 0, 0);
> +		if (ret)
> +			intel_crtc->rotation = old_val;
> +	}
> +
> +	return ret;
> +}
> +
>  static struct drm_crtc_helper_funcs intel_helper_funcs = {
>  	.mode_set_base_atomic = intel_pipe_set_base_atomic,
>  	.load_lut = intel_crtc_load_lut,
> @@ -10160,6 +10198,7 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
>  	.set_config = intel_crtc_set_config,
>  	.destroy = intel_crtc_destroy,
>  	.page_flip = intel_crtc_page_flip,
> +	.set_property = intel_crtc_set_property
>  };
>  
>  static void intel_cpu_pll_init(struct drm_device *dev)
> @@ -10288,6 +10327,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
>  	 */
>  	intel_crtc->pipe = pipe;
>  	intel_crtc->plane = pipe;
> +	intel_crtc->rotation = BIT(DRM_ROTATE_0);
>  	if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
>  		DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
>  		intel_crtc->plane = !pipe;
> @@ -10298,6 +10338,16 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
>  	dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
>  	dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
>  
> +	if (!dev_priv->rotation_property)
> +		dev_priv->rotation_property =
> +			drm_mode_create_rotation_property(dev,
> +							BIT(DRM_ROTATE_0) |
> +							BIT(DRM_ROTATE_180));
> +	if (dev_priv->rotation_property)
> +		drm_object_attach_property(&intel_crtc->base.base,
> +					dev_priv->rotation_property,
> +					intel_crtc->rotation);

As I mentioned it looks like rotation is only supported starting from
gen4. So we need to check for that here before we add the props.

> +
>  	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
>  }
>  
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 7a79b8e..02dfdb6 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -331,6 +331,8 @@ struct intel_crtc {
>  	struct drm_crtc base;
>  	enum pipe pipe;
>  	enum plane plane;
> +	unsigned int rotation;
> +
>  	u8 lut_r[256], lut_g[256], lut_b[256];
>  	/*
>  	 * Whether the crtc and the connected output pipeline is active. Implies
> -- 
> 1.8.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC

Re: [PATCH 10/11] drm/i915: Add 180 degree primary plane rotation support

[Ville Syrjälä]

On Sat, Feb 01, 2014 at 12:40:46AM +0530, sagar.a.kamble@intel.com wrote:
> From: Sagar Kamble <sagar.a.kamble@intel.com>
> 
> Primary planes support 180 degree rotation. Expose the feature
> through rotation drm property.
> 
> Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
> Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h      |  1 +
>  drivers/gpu/drm/i915/intel_display.c | 54 ++++++++++++++++++++++++++++++++++--
>  drivers/gpu/drm/i915/intel_drv.h     |  2 ++
>  3 files changed, 55 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 57906c5..d3000c4 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3553,6 +3553,7 @@
>  #define   DISPPLANE_NO_LINE_DOUBLE		0
>  #define   DISPPLANE_STEREO_POLARITY_FIRST	0
>  #define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
> +#define   DISPPLANE_ROTATE_180			(1<<15)
>  #define   DISPPLANE_TRICKLE_FEED_DISABLE	(1<<14) /* Ironlake */
>  #define   DISPPLANE_TILED			(1<<10)
>  #define _DSPAADDR		(dev_priv->info->display_mmio_offset + 0x70184)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 4d4a0d9..483de59 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2037,6 +2037,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  	unsigned long linear_offset;
>  	u32 dspcntr;
>  	u32 reg;
> +	int pixel_size;
>  
>  	switch (plane) {
>  	case 0:
> @@ -2047,6 +2048,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  		return -EINVAL;
>  	}
>  
> +	pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
>  	intel_fb = to_intel_framebuffer(fb);
>  	obj = intel_fb->obj;
>  
> @@ -2054,6 +2056,8 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  	dspcntr = I915_READ(reg);
>  	/* Mask out pixel format bits in case we change it */
>  	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
> +	dspcntr &= ~DISPPLANE_ROTATE_180;
> +
>  	switch (fb->pixel_format) {
>  	case DRM_FORMAT_C8:
>  		dspcntr |= DISPPLANE_8BPP;
> @@ -2095,8 +2099,6 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  	if (IS_G4X(dev))
>  		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
>  
> -	I915_WRITE(reg, dspcntr);
> -
>  	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
>  
>  	if (INTEL_INFO(dev)->gen >= 4) {
> @@ -2109,6 +2111,17 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  		intel_crtc->dspaddr_offset = linear_offset;
>  	}
>  
> +	if (intel_crtc->rotation == BIT(DRM_ROTATE_180)) {
> +		dspcntr |= DISPPLANE_ROTATE_180;
> +
> +		x += (fb->width - 1);
> +		y += (fb->height - 1);
> +		linear_offset += (fb->height - 1) * fb->pitches[0] +
> +                                   fb->width * pixel_size;
> +	}
> +
> +	I915_WRITE(reg, dspcntr);
> +
>  	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
>  		      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
>  		      fb->pitches[0]);
> @@ -8748,6 +8761,31 @@ free_work:
>  	return ret;
>  }
>  
> +static int intel_crtc_set_property(struct drm_crtc *crtc,
> +				    struct drm_property *prop,
> +				    uint64_t val)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	uint64_t old_val;
> +	int ret = -ENOENT;
> +
> +	if (prop == dev_priv->rotation_property) {
> +		/* exactly one rotation angle please */
> +		if (hweight32(val & 0xf) != 1)
> +			return -EINVAL;
> +
> +		old_val = intel_crtc->rotation;
> +		intel_crtc->rotation = val;

Couple of other things we'd need to do here is check if the crtc is even
active, since calling .update_plane() on an inactive crtc would oops.

Also we need to wait for pending page flips to make sure we don't
overtake them.

Additionall the FBC code would need some rotation checks since FBC
doesn't work with a rotated plane on certain generations.

> +		ret = dev_priv->display.update_plane(crtc, crtc->fb, 0, 0);
> +		if (ret)
> +			intel_crtc->rotation = old_val;
> +	}
> +
> +	return ret;
> +}
> +
>  static struct drm_crtc_helper_funcs intel_helper_funcs = {
>  	.mode_set_base_atomic = intel_pipe_set_base_atomic,
>  	.load_lut = intel_crtc_load_lut,
> @@ -10160,6 +10198,7 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
>  	.set_config = intel_crtc_set_config,
>  	.destroy = intel_crtc_destroy,
>  	.page_flip = intel_crtc_page_flip,
> +	.set_property = intel_crtc_set_property
>  };
>  
>  static void intel_cpu_pll_init(struct drm_device *dev)
> @@ -10288,6 +10327,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
>  	 */
>  	intel_crtc->pipe = pipe;
>  	intel_crtc->plane = pipe;
> +	intel_crtc->rotation = BIT(DRM_ROTATE_0);
>  	if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
>  		DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
>  		intel_crtc->plane = !pipe;
> @@ -10298,6 +10338,16 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
>  	dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
>  	dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
>  
> +	if (!dev_priv->rotation_property)
> +		dev_priv->rotation_property =
> +			drm_mode_create_rotation_property(dev,
> +							BIT(DRM_ROTATE_0) |
> +							BIT(DRM_ROTATE_180));
> +	if (dev_priv->rotation_property)
> +		drm_object_attach_property(&intel_crtc->base.base,
> +					dev_priv->rotation_property,
> +					intel_crtc->rotation);
> +
>  	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
>  }
>  
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 7a79b8e..02dfdb6 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -331,6 +331,8 @@ struct intel_crtc {
>  	struct drm_crtc base;
>  	enum pipe pipe;
>  	enum plane plane;
> +	unsigned int rotation;
> +
>  	u8 lut_r[256], lut_g[256], lut_b[256];
>  	/*
>  	 * Whether the crtc and the connected output pipeline is active. Implies
> -- 
> 1.8.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC

[PATCH 11/11] drm: Set property to return invalid for unsupported arguments for bitmask property

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

DRM will not propagate the set_property call for bitmask drm
properties if they are not supported by underlying driver.

Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/drm_crtc.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 4f5e408..4c92741 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -3420,6 +3420,8 @@ int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
 	struct drm_mode_object *arg_obj;
 	struct drm_mode_object *prop_obj;
 	struct drm_property *property;
+	struct drm_property_enum *prop_enum;
+	bool supported_val = false;
 	int ret = -EINVAL;
 	int i;
 
@@ -3451,6 +3453,22 @@ int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
 	}
 	property = obj_to_property(prop_obj);
 
+	if (property->flags | DRM_MODE_PROP_BITMASK) {
+		if (!list_empty(&property->enum_blob_list)) {
+			list_for_each_entry(prop_enum,
+					&property->enum_blob_list, head) {
+				if (BIT(prop_enum->value) == arg->value) {
+					supported_val = true;
+					break;
+				}
+			}
+		}
+		if (!supported_val) {
+			ret = -EINVAL;
+			goto out;
+		}
+	}
+
 	if (!drm_property_change_is_valid(property, arg->value))
 		goto out;
 
-- 
1.8.5

Re: [PATCH 00/11] Enabling 180 degree rotation for sprite and crtc planes

[Ville Syrjälä]

On Sat, Feb 01, 2014 at 12:40:36AM +0530, sagar.a.kamble@intel.com wrote:
> From: Sagar Kamble <sagar.a.kamble@intel.com>
> 
> With these patches 180 degree rotation for crtc and sprite planes will be
> exposed through drm rotation properties implemented by Ville few days back.
> I have added CRTC rotation support on top of Ville's 9 patches that includes
> sprite rotation. Omapdrm changes, rotation_simplify, drm_rect functions are
> also included in this list. Functionality has been tested with i-g-t test
> "intel_plane_rotate".
> 
> 
> Sagar Kamble (11):

Somehow you've managed to change the authorship information of most of
the patches. Please don't do that.

>   drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h
>   drm: Add drm_mode_create_rotation_property()
>   drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()
>   drm: Add drm_rotation_simplify()
>   drm/i915: Add 180 degree sprite rotation support
>   drm/i915: Make intel_plane_restore() return an error
>   drm/i915: Add rotation property for sprites
>   drm: Add support_bits parameter to drm_property_create_bitmask()
>   drm: Add drm_rect rotation functions
>   drm/i915: Add 180 degree primary plane rotation support
>   drm: Set property to return invalid for unsupported arguments for
>     bitmask property
> 
>  drivers/gpu/drm/drm_crtc.c           |  72 +++++++++++++++++-
>  drivers/gpu/drm/drm_rect.c           | 140 +++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/i915_drv.h      |   1 +
>  drivers/gpu/drm/i915/i915_reg.h      |   4 +
>  drivers/gpu/drm/i915/intel_display.c |  54 +++++++++++++-
>  drivers/gpu/drm/i915/intel_drv.h     |   5 +-
>  drivers/gpu/drm/i915/intel_sprite.c  |  90 ++++++++++++++++++++--
>  drivers/gpu/drm/omapdrm/omap_drv.h   |   7 --
>  drivers/gpu/drm/omapdrm/omap_plane.c |  17 ++---
>  include/drm/drm_crtc.h               |  16 +++-
>  include/drm/drm_rect.h               |   6 ++
>  11 files changed, 382 insertions(+), 30 deletions(-)
> 
> -- 
> 1.8.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC

Re: [PATCH 00/11] Enabling 180 degree rotation for sprite and crtc planes

[Sagar Arun Kamble]

On Fri, 2014-01-31 at 22:38 +0200, Ville Syrjälä wrote:
> On Sat, Feb 01, 2014 at 12:40:36AM +0530, sagar.a.kamble@intel.com wrote:
> > From: Sagar Kamble <sagar.a.kamble@intel.com>
> > 
> > With these patches 180 degree rotation for crtc and sprite planes will be
> > exposed through drm rotation properties implemented by Ville few days back.
> > I have added CRTC rotation support on top of Ville's 9 patches that includes
> > sprite rotation. Omapdrm changes, rotation_simplify, drm_rect functions are
> > also included in this list. Functionality has been tested with i-g-t test
> > "intel_plane_rotate".
> > 
> > 
> > Sagar Kamble (11):
> 
> Somehow you've managed to change the authorship information of most of
> the patches. Please don't do that.

Sorry for this mistake. I am new to this. I will send the revised
patches for addressing the review comments.
> 
> >   drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h
> >   drm: Add drm_mode_create_rotation_property()
> >   drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()
> >   drm: Add drm_rotation_simplify()
> >   drm/i915: Add 180 degree sprite rotation support
> >   drm/i915: Make intel_plane_restore() return an error
> >   drm/i915: Add rotation property for sprites
> >   drm: Add support_bits parameter to drm_property_create_bitmask()
> >   drm: Add drm_rect rotation functions
> >   drm/i915: Add 180 degree primary plane rotation support
> >   drm: Set property to return invalid for unsupported arguments for
> >     bitmask property
> > 
> >  drivers/gpu/drm/drm_crtc.c           |  72 +++++++++++++++++-
> >  drivers/gpu/drm/drm_rect.c           | 140 +++++++++++++++++++++++++++++++++++
> >  drivers/gpu/drm/i915/i915_drv.h      |   1 +
> >  drivers/gpu/drm/i915/i915_reg.h      |   4 +
> >  drivers/gpu/drm/i915/intel_display.c |  54 +++++++++++++-
> >  drivers/gpu/drm/i915/intel_drv.h     |   5 +-
> >  drivers/gpu/drm/i915/intel_sprite.c  |  90 ++++++++++++++++++++--
> >  drivers/gpu/drm/omapdrm/omap_drv.h   |   7 --
> >  drivers/gpu/drm/omapdrm/omap_plane.c |  17 ++---
> >  include/drm/drm_crtc.h               |  16 +++-
> >  include/drm/drm_rect.h               |   6 ++
> >  11 files changed, 382 insertions(+), 30 deletions(-)
> > 
> > -- 
> > 1.8.5
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 00/11] Enabling 180 degree rotation for sprite and crtc planes

[Daniel Vetter]

On Mon, Feb 03, 2014 at 11:59:05AM +0530, Sagar Arun Kamble wrote:
> On Fri, 2014-01-31 at 22:38 +0200, Ville Syrjälä wrote:
> > On Sat, Feb 01, 2014 at 12:40:36AM +0530, sagar.a.kamble@intel.com wrote:
> > > From: Sagar Kamble <sagar.a.kamble@intel.com>
> > > 
> > > With these patches 180 degree rotation for crtc and sprite planes will be
> > > exposed through drm rotation properties implemented by Ville few days back.
> > > I have added CRTC rotation support on top of Ville's 9 patches that includes
> > > sprite rotation. Omapdrm changes, rotation_simplify, drm_rect functions are
> > > also included in this list. Functionality has been tested with i-g-t test
> > > "intel_plane_rotate".
> > > 
> > > 
> > > Sagar Kamble (11):
> > 
> > Somehow you've managed to change the authorship information of most of
> > the patches. Please don't do that.
> 
> Sorry for this mistake. I am new to this. I will send the revised
> patches for addressing the review comments.

git gui does by default change the author, git commit --amend doesn't. You
can fix this up with git commit --amend --author="..."
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch