Re: [PATCH 4/7] drm/i915: unify FLIP_DONE macro names

[Jesse Barnes <jbarnes@virtuousgeek.org>]

On Tue,  4 Feb 2014 21:35:48 +0200
Imre Deak <imre.deak@intel.com> wrote:

> s/FLIPDONE/FLIP_DONE/ to make all FLIP_DONE macro names consistent.
> 
> No functional change.
> 
> Signed-off-by: Imre Deak <imre.deak@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_irq.c |  2 +-
>  drivers/gpu/drm/i915/i915_reg.h | 18 +++++++++---------
>  2 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index e0e5190..3b876ee 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -1500,7 +1500,7 @@ static void valleyview_pipestat_irq_handler(struct drm_device *dev, u32 iir)
>  		if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS)
>  			drm_handle_vblank(dev, pipe);
>  
> -		if (pipe_stats[pipe] & PLANE_FLIPDONE_INT_STATUS_VLV) {
> +		if (pipe_stats[pipe] & PLANE_FLIP_DONE_INT_STATUS_VLV) {
>  			intel_prepare_page_flip(dev, pipe);
>  			intel_finish_page_flip(dev, pipe);
>  		}
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index abd18cd..8eefb26 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3227,7 +3227,7 @@
>  #define   PIPECONF_DITHER_TYPE_TEMP (3<<2)
>  #define _PIPEASTAT		(dev_priv->info->display_mmio_offset + 0x70024)
>  #define   PIPE_FIFO_UNDERRUN_STATUS		(1UL<<31)
> -#define   SPRITE1_FLIPDONE_INT_EN_VLV		(1UL<<30)
> +#define   SPRITE1_FLIP_DONE_INT_EN_VLV		(1UL<<30)
>  #define   PIPE_CRC_ERROR_ENABLE			(1UL<<29)
>  #define   PIPE_CRC_DONE_ENABLE			(1UL<<28)
>  #define   PIPE_GMBUS_EVENT_ENABLE		(1UL<<27)
> @@ -3245,12 +3245,12 @@
>  #define   PIPE_VBLANK_INTERRUPT_ENABLE		(1UL<<17)
>  #define   PIPEA_HBLANK_INT_EN_VLV		(1UL<<16)
>  #define   PIPE_OVERLAY_UPDATED_ENABLE		(1UL<<16)
> -#define   SPRITE1_FLIPDONE_INT_STATUS_VLV	(1UL<<15)
> -#define   SPRITE0_FLIPDONE_INT_STATUS_VLV	(1UL<<14)
> +#define   SPRITE1_FLIP_DONE_INT_STATUS_VLV	(1UL<<15)
> +#define   SPRITE0_FLIP_DONE_INT_STATUS_VLV	(1UL<<14)
>  #define   PIPE_CRC_ERROR_INTERRUPT_STATUS	(1UL<<13)
>  #define   PIPE_CRC_DONE_INTERRUPT_STATUS	(1UL<<12)
>  #define   PIPE_GMBUS_INTERRUPT_STATUS		(1UL<<11)
> -#define   PLANE_FLIPDONE_INT_STATUS_VLV		(1UL<<10)
> +#define   PLANE_FLIP_DONE_INT_STATUS_VLV	(1UL<<10)
>  #define   PIPE_HOTPLUG_INTERRUPT_STATUS		(1UL<<10)
>  #define   PIPE_VSYNC_INTERRUPT_STATUS		(1UL<<9)
>  #define   PIPE_DISPLAY_LINE_COMPARE_STATUS	(1UL<<8)
> @@ -3286,14 +3286,14 @@
>  #define   PIPEB_LINE_COMPARE_INT_EN		(1<<29)
>  #define   PIPEB_HLINE_INT_EN			(1<<28)
>  #define   PIPEB_VBLANK_INT_EN			(1<<27)
> -#define   SPRITED_FLIPDONE_INT_EN		(1<<26)
> -#define   SPRITEC_FLIPDONE_INT_EN		(1<<25)
> -#define   PLANEB_FLIPDONE_INT_EN		(1<<24)
> +#define   SPRITED_FLIP_DONE_INT_EN		(1<<26)
> +#define   SPRITEC_FLIP_DONE_INT_EN		(1<<25)
> +#define   PLANEB_FLIP_DONE_INT_EN		(1<<24)
>  #define   PIPEA_LINE_COMPARE_INT_EN		(1<<21)
>  #define   PIPEA_HLINE_INT_EN			(1<<20)
>  #define   PIPEA_VBLANK_INT_EN			(1<<19)
> -#define   SPRITEB_FLIPDONE_INT_EN		(1<<18)
> -#define   SPRITEA_FLIPDONE_INT_EN		(1<<17)
> +#define   SPRITEB_FLIP_DONE_INT_EN		(1<<18)
> +#define   SPRITEA_FLIP_DONE_INT_EN		(1<<17)
>  #define   PLANEA_FLIPDONE_INT_EN		(1<<16)
>  
>  #define DPINVGTT				(VLV_DISPLAY_BASE + 0x7002c) /* VLV only */

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>