Re: [PATCH v3 10/12] drm/i915: Add 180 degree primary plane rotation support

Ville Syrjälä
2014-02-06T15:56:52Z

On Thu, Feb 06, 2014 at 08:34:51PM +0530, sagar.a.kamble@intel.com wrote:
> From: Sagar Kamble <sagar.a.kamble@intel.com>
>
> Primary planes support 180 degree rotation. Expose the feature
> through rotation drm property.
>
> v2: Calculating linear/tiled offsets based on pipe source width and
> height. Added 180 degree rotation support in ironlake_update_plane.
>
> v3: Checking if CRTC is active before issueing update_plane. Added
> wait for vblank to make sure we dont overtake page flips. Disabling
> FBC since it does not work with rotated planes.
>
> Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
> Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 1 +
> drivers/gpu/drm/i915/intel_display.c | 75 ++++++++++++++++++++++++++++++++++--
> drivers/gpu/drm/i915/intel_drv.h | 2 +
> 3 files changed, 74 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 57906c5..d3000c4 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3553,6 +3553,7 @@
> #define DISPPLANE_NO_LINE_DOUBLE 0
> #define DISPPLANE_STEREO_POLARITY_FIRST 0
> #define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
> +#define DISPPLANE_ROTATE_180 (1<<15)
> #define DISPPLANE_TRICKLE_FEED_DISABLE (1<<14) /* Ironlake */
> #define DISPPLANE_TILED (1<<10)
> #define _DSPAADDR (dev_priv->info->display_mmio_offset + 0x70184)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 4d4a0d9..961308d 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2037,6 +2037,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
> unsigned long linear_offset;
> u32 dspcntr;
> u32 reg;
> + int pixel_size;
>
> switch (plane) {
> case 0:
> @@ -2047,6 +2048,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
> return -EINVAL;
> }
>
> + pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
> intel_fb = to_intel_framebuffer(fb);
> obj = intel_fb->obj;
>
> @@ -2054,6 +2056,8 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
> dspcntr = I915_READ(reg);
> /* Mask out pixel format bits in case we change it */
> dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
> + dspcntr &= ~DISPPLANE_ROTATE_180;
> +
> switch (fb->pixel_format) {
> case DRM_FORMAT_C8:
> dspcntr |= DISPPLANE_8BPP;
> @@ -2095,8 +2099,6 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
> if (IS_G4X(dev))
> dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
>
> - I915_WRITE(reg, dspcntr);
> -
> linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
>
> if (INTEL_INFO(dev)->gen >= 4) {
> @@ -2109,6 +2111,17 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
> intel_crtc->dspaddr_offset = linear_offset;
> }
>
> + if (intel_crtc->rotation == BIT(DRM_ROTATE_180)) {
> + dspcntr |= DISPPLANE_ROTATE_180;
> +
> + x += (intel_crtc->config.pipe_src_w - 1);
> + y += (intel_crtc->config.pipe_src_h - 1);
> + linear_offset += (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
> + intel_crtc->config.pipe_src_w * pixel_size;
> + }
> +
> + I915_WRITE(reg, dspcntr);
> +
> DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
> i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
> fb->pitches[0]);
> @@ -2137,6 +2150,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
> unsigned long linear_offset;
> u32 dspcntr;
> u32 reg;
> + int pixel_size;
>
> switch (plane) {
> case 0:
> @@ -2148,6 +2162,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
> return -EINVAL;
> }
>
> + pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
> intel_fb = to_intel_framebuffer(fb);
> obj = intel_fb->obj;
>
> @@ -2155,6 +2170,8 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
> dspcntr = I915_READ(reg);
> /* Mask out pixel format bits in case we change it */
> dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
> + dspcntr &= ~DISPPLANE_ROTATE_180;
> +
> switch (fb->pixel_format) {
> case DRM_FORMAT_C8:
> dspcntr |= DISPPLANE_8BPP;
> @@ -2192,8 +2209,6 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
> else
> dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
>
> - I915_WRITE(reg, dspcntr);
> -
> linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
> intel_crtc->dspaddr_offset =
> intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
> @@ -2201,6 +2216,19 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
> fb->pitches[0]);
> linear_offset -= intel_crtc->dspaddr_offset;
>
> + if (intel_crtc->rotation == BIT(DRM_ROTATE_180)) {
> + dspcntr |= DISPPLANE_ROTATE_180;
> +
> + if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
> + x += (intel_crtc->config.pipe_src_w - 1);
> + y += (intel_crtc->config.pipe_src_h - 1);
> + linear_offset += (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
> + intel_crtc->config.pipe_src_w * pixel_size;
> + }
> + }
> +
> + I915_WRITE(reg, dspcntr);
> +
> DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
> i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
> fb->pitches[0]);
> @@ -8748,6 +8776,33 @@ free_work:
> return ret;
> }
>
> +static int intel_crtc_set_property(struct drm_crtc *crtc,
> + struct drm_property *prop,
> + uint64_t val)
> +{
> + struct drm_device *dev = crtc->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + uint64_t old_val;
> + int ret = -ENOENT;
> +
> + if ((prop == dev_priv->rotation_property) && intel_crtc->active) {

We still want to accept the prop change if the crtc is not active. We
just need to skip the actual hardware frobbing.

This also exposes another problem we have. What it the current master
has enabled rotation, and then exits. Ideally I'd like each master to
maintain its own full state, but since we don't have that currently,
I think we might need to do some selective property resetting when
switching masters. Looks like omapdrm does that in lastclose for the
rotation props. So I suppose we want to follow suite for now.

> + /* exactly one rotation angle please */
> + if (hweight32(val & 0xf) != 1)
> + return -EINVAL;
> +
> + old_val = intel_crtc->rotation;
> + intel_crtc->rotation = val;
> + intel_wait_for_vblank(dev, intel_crtc->pipe);

That should be:
intel_crtc_wait_for_pending_flips(crtc);

> + intel_disable_fbc(dev);

That could be a bit more selective:

if (dev_priv->fbc.plane == plane &&
INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev))
intel_disable_fbc(dev);

Also intel_update_fbc() would need similar checks so that it won't
accidentally re-enable FBC on a rotated plane.

> + ret = dev_priv->display.update_plane(crtc, crtc->fb, 0, 0);
> + if (ret)
> + intel_crtc->rotation = old_val;
> + }
> +
> + return ret;
> +}
> +
> static struct drm_crtc_helper_funcs intel_helper_funcs = {
> .mode_set_base_atomic = intel_pipe_set_base_atomic,
> .load_lut = intel_crtc_load_lut,
> @@ -10160,6 +10215,7 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
> .set_config = intel_crtc_set_config,
> .destroy = intel_crtc_destroy,
> .page_flip = intel_crtc_page_flip,
> + .set_property = intel_crtc_set_property
> };
>
> static void intel_cpu_pll_init(struct drm_device *dev)
> @@ -10288,6 +10344,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
> */
> intel_crtc->pipe = pipe;
> intel_crtc->plane = pipe;
> + intel_crtc->rotation = BIT(DRM_ROTATE_0);
> if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
> DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
> intel_crtc->plane = !pipe;
> @@ -10298,6 +10355,16 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
> dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
> dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
>
> + if (!dev_priv->rotation_property)
> + dev_priv->rotation_property =
> + drm_mode_create_rotation_property(dev,
> + BIT(DRM_ROTATE_0) |
> + BIT(DRM_ROTATE_180));
> + if (dev_priv->rotation_property)
> + drm_object_attach_property(&intel_crtc->base.base,
> + dev_priv->rotation_property,
> + intel_crtc->rotation);
> +

Still missing the gen checks:

if (INTEL_INFO(dev)->gen >= 4) {
... add rotation prop ...
}

> drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
> }
>
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 7a79b8e..02dfdb6 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -331,6 +331,8 @@ struct intel_crtc {
> struct drm_crtc base;
> enum pipe pipe;
> enum plane plane;
> + unsigned int rotation;
> +
> u8 lut_r[256], lut_g[256], lut_b[256];
> /*
> * Whether the crtc and the connected output pipeline is active. Implies
> --
> 1.8.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

--
Ville Syrjälä
Intel OTC