[PATCH v3 00/12] Enabling 180 degree rotation for sprite and crtc planes

[PATCH v3 00/12] Enabling 180 degree rotation for sprite and crtc planes

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

These patches will enable 180 degree rotation for CRTC and Sprite planes. This
version has following changes:
1. Addressed review comments for CRTC rotation from FBC, page flip, CRTC active/
inactive perspective.
2. Removed drm_rect_rotate amd drm_rect_rotate_inv functions as they dont take
care of clipped planes and 180 rotation in that case produces invalid result.

Sagar Kamble (3):
  drm/i915: Add 180 degree primary plane rotation support
  drm: Set property to return invalid for unsupported arguments for
    bitmask property
  drm/i915: Removing rotate and inverse rotate calls from update_plane

Ville Syrjälä (9):
  drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h
  drm: Add support_bits parameter to drm_property_create_bitmask()
  drm: Add drm_mode_create_rotation_property()
  drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()
  drm: Add drm_rect rotation functions
  drm: Add drm_rotation_simplify()
  drm/i915: Add 180 degree sprite rotation support
  drm/i915: Make intel_plane_restore() return an error
  drm/i915: Add rotation property for sprites

 drivers/gpu/drm/drm_crtc.c           |  72 +++++++++++++++++-
 drivers/gpu/drm/drm_rect.c           | 140 +++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_drv.h      |   1 +
 drivers/gpu/drm/i915/i915_reg.h      |   4 +
 drivers/gpu/drm/i915/intel_display.c |  75 ++++++++++++++++++-
 drivers/gpu/drm/i915/intel_drv.h     |   5 +-
 drivers/gpu/drm/i915/intel_sprite.c  |  87 ++++++++++++++++++++--
 drivers/gpu/drm/omapdrm/omap_drv.h   |   7 --
 drivers/gpu/drm/omapdrm/omap_plane.c |  17 ++---
 include/drm/drm_crtc.h               |  15 +++-
 include/drm/drm_rect.h               |   6 ++
 11 files changed, 397 insertions(+), 32 deletions(-)

-- 
1.8.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 01/12] drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h

[sagar.a.kamble]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

The rotation property stuff should be standardized among all drivers.
Move the bits to drm_crtc.h from omap_drv.h.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/omapdrm/omap_drv.h | 7 -------
 include/drm/drm_crtc.h             | 8 ++++++++
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
index 428b2981..aac8e10 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.h
+++ b/drivers/gpu/drm/omapdrm/omap_drv.h
@@ -119,13 +119,6 @@ struct omap_drm_private {
 	struct omap_drm_irq error_handler;
 };
 
-/* this should probably be in drm-core to standardize amongst drivers */
-#define DRM_ROTATE_0	0
-#define DRM_ROTATE_90	1
-#define DRM_ROTATE_180	2
-#define DRM_ROTATE_270	3
-#define DRM_REFLECT_X	4
-#define DRM_REFLECT_Y	5
 
 #ifdef CONFIG_DEBUG_FS
 int omap_debugfs_init(struct drm_minor *minor);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 71727b6..d5c46c1 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -65,6 +65,14 @@ struct drm_object_properties {
 	uint64_t values[DRM_OBJECT_MAX_PROPERTY];
 };
 
+/* rotation property bits */
+#define DRM_ROTATE_0	0
+#define DRM_ROTATE_90	1
+#define DRM_ROTATE_180	2
+#define DRM_ROTATE_270	3
+#define DRM_REFLECT_X	4
+#define DRM_REFLECT_Y	5
+
 /*
  * Note on terminology:  here, for brevity and convenience, we refer to connector
  * control chips as 'CRTCs'.  They can control any type of connector, VGA, LVDS,
-- 
1.8.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 02/12] drm: Add support_bits parameter to drm_property_create_bitmask()

[sagar.a.kamble]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Make drm_property_create_bitmask() a bit more generic by allowing the
caller to specify which bits are in fact supported. This allows multiple
callers to use the same enum list, but still create different versions
of the same property with different list of supported bits.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/drm_crtc.c | 6 +++++-
 include/drm/drm_crtc.h     | 3 ++-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 3b7d32d..628d3d3 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -2906,7 +2906,8 @@ EXPORT_SYMBOL(drm_property_create_enum);
 struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
 					 int flags, const char *name,
 					 const struct drm_prop_enum_list *props,
-					 int num_values)
+					 int num_values,
+					 unsigned int supported_bits)
 {
 	struct drm_property *property;
 	int i, ret;
@@ -2918,6 +2919,9 @@ struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
 		return NULL;
 
 	for (i = 0; i < num_values; i++) {
+		if (!(supported_bits & (1 << i)))
+			continue;
+
 		ret = drm_property_add_enum(property, i,
 				      props[i].type,
 				      props[i].name);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index d5c46c1..41b86d2 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1070,7 +1070,8 @@ extern struct drm_property *drm_property_create_enum(struct drm_device *dev, int
 struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
 					 int flags, const char *name,
 					 const struct drm_prop_enum_list *props,
-					 int num_values);
+					 int num_values,
+					 unsigned int supported_bits);
 struct drm_property *drm_property_create_range(struct drm_device *dev, int flags,
 					 const char *name,
 					 uint64_t min, uint64_t max);
-- 
1.8.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 03/12] drm: Add drm_mode_create_rotation_property()

[sagar.a.kamble]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Add a function to create a standards compliant rotation property.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/drm_crtc.c | 18 ++++++++++++++++++
 include/drm/drm_crtc.h     |  2 ++
 2 files changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 628d3d3..4983c6e 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -4118,3 +4118,21 @@ void drm_mode_config_cleanup(struct drm_device *dev)
 	idr_destroy(&dev->mode_config.crtc_idr);
 }
 EXPORT_SYMBOL(drm_mode_config_cleanup);
+
+struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
+						       unsigned int supported_rotations)
+{
+	static const struct drm_prop_enum_list props[] = {
+		{ DRM_ROTATE_0,   "rotate-0" },
+		{ DRM_ROTATE_90,  "rotate-90" },
+		{ DRM_ROTATE_180, "rotate-180" },
+		{ DRM_ROTATE_270, "rotate-270" },
+		{ DRM_REFLECT_X,  "reflect-x" },
+		{ DRM_REFLECT_Y,  "reflect-y" },
+	};
+
+	return drm_property_create_bitmask(dev, 0, "rotation",
+					   props, ARRAY_SIZE(props),
+					   supported_rotations);
+}
+EXPORT_SYMBOL(drm_mode_create_rotation_property);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 41b86d2..4b3ac70 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1183,6 +1183,8 @@ extern int drm_format_plane_cpp(uint32_t format, int plane);
 extern int drm_format_horz_chroma_subsampling(uint32_t format);
 extern int drm_format_vert_chroma_subsampling(uint32_t format);
 extern const char *drm_get_format_name(uint32_t format);
+extern struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
+							      unsigned int supported_rotations);
 
 /* Helpers */
 static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
-- 
1.8.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 04/12] drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()

[sagar.a.kamble]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Use the new drm_mode_create_rotation_property() in omapdrm.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/omapdrm/omap_plane.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
index 046d5e6..fee8f35 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -300,16 +300,13 @@ void omap_plane_install_properties(struct drm_plane *plane,
 	if (priv->has_dmm) {
 		prop = priv->rotation_prop;
 		if (!prop) {
-			const struct drm_prop_enum_list props[] = {
-					{ DRM_ROTATE_0,   "rotate-0" },
-					{ DRM_ROTATE_90,  "rotate-90" },
-					{ DRM_ROTATE_180, "rotate-180" },
-					{ DRM_ROTATE_270, "rotate-270" },
-					{ DRM_REFLECT_X,  "reflect-x" },
-					{ DRM_REFLECT_Y,  "reflect-y" },
-			};
-			prop = drm_property_create_bitmask(dev, 0, "rotation",
-					props, ARRAY_SIZE(props));
+			prop = drm_mode_create_rotation_property(dev,
+								 BIT(DRM_ROTATE_0) |
+								 BIT(DRM_ROTATE_90) |
+								 BIT(DRM_ROTATE_180) |
+								 BIT(DRM_ROTATE_270) |
+								 BIT(DRM_REFLECT_X) |
+								 BIT(DRM_REFLECT_Y));
 			if (prop == NULL)
 				return;
 			priv->rotation_prop = prop;
-- 
1.8.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 05/12] drm: Add drm_rect rotation functions

[sagar.a.kamble]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Add some helper functions to move drm_rects between different rotated
coordinate spaces. One function does the forward transform and
another does the inverse.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/drm_rect.c | 140 +++++++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_rect.h     |   6 ++
 2 files changed, 146 insertions(+)

diff --git a/drivers/gpu/drm/drm_rect.c b/drivers/gpu/drm/drm_rect.c
index 7047ca0..631f5af 100644
--- a/drivers/gpu/drm/drm_rect.c
+++ b/drivers/gpu/drm/drm_rect.c
@@ -293,3 +293,143 @@ void drm_rect_debug_print(const struct drm_rect *r, bool fixed_point)
 		DRM_DEBUG_KMS("%dx%d%+d%+d\n", w, h, r->x1, r->y1);
 }
 EXPORT_SYMBOL(drm_rect_debug_print);
+
+/**
+ * drm_rect_rotate - Rotate the rectangle
+ * @r: rectangle to be rotated
+ * @width: Width of the coordinate space
+ * @height: Height of the coordinate space
+ * @rotation: Transformation to be applied
+ *
+ * Apply @rotation to the coordinates of rectangle @r.
+ *
+ * @width and @height combined with @rotation define
+ * the location of the new origin.
+ *
+ * @width correcsponds to the horizontal and @height
+ * to the vertical axis of the untransformed coordinate
+ * space.
+ */
+void drm_rect_rotate(struct drm_rect *r,
+		     int width, int height,
+		     unsigned int rotation)
+{
+	struct drm_rect tmp;
+
+	if (rotation & (BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y))) {
+		tmp = *r;
+
+		if (rotation & BIT(DRM_REFLECT_X)) {
+			r->x1 = width - tmp.x2;
+			r->x2 = width - tmp.x1;
+		}
+
+		if (rotation & BIT(DRM_REFLECT_Y)) {
+			r->y1 = height - tmp.y2;
+			r->y2 = height - tmp.y1;
+		}
+	}
+
+	switch (rotation & 0xf) {
+	case BIT(DRM_ROTATE_0):
+		break;
+	case BIT(DRM_ROTATE_90):
+		tmp = *r;
+		r->x1 = tmp.y1;
+		r->x2 = tmp.y2;
+		r->y1 = width - tmp.x2;
+		r->y2 = width - tmp.x1;
+		break;
+	case BIT(DRM_ROTATE_180):
+		tmp = *r;
+		r->x1 = width - tmp.x2;
+		r->x2 = width - tmp.x1;
+		r->y1 = height - tmp.y2;
+		r->y2 = height - tmp.y1;
+		break;
+	case BIT(DRM_ROTATE_270):
+		tmp = *r;
+		r->x1 = height - tmp.y2;
+		r->x2 = height - tmp.y1;
+		r->y1 = tmp.x1;
+		r->y2 = tmp.x2;
+		break;
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL(drm_rect_rotate);
+
+/**
+ * drm_rect_rotate_inv - Inverse rotate the rectangle
+ * @r: rectangle to be rotated
+ * @width: Width of the coordinate space
+ * @height: Height of the coordinate space
+ * @rotation: Transformation whose inverse is to be applied
+ *
+ * Apply the inverse of @rotation to the coordinates
+ * of rectangle @r.
+ *
+ * @width and @height combined with @rotation define
+ * the location of the new origin.
+ *
+ * @width correcsponds to the horizontal and @height
+ * to the vertical axis of the original untransformed
+ * coordinate space, so that you never have to flip
+ * them when doing a rotatation and its inverse.
+ * That is, if you do:
+ *
+ * drm_rotate(&r, width, height, rotation);
+ * drm_rotate_inv(&r, width, height, rotation);
+ *
+ * you will always get back the original rectangle.
+ */
+void drm_rect_rotate_inv(struct drm_rect *r,
+			 int width, int height,
+			 unsigned int rotation)
+{
+	struct drm_rect tmp;
+
+	switch (rotation & 0xf) {
+	case BIT(DRM_ROTATE_0):
+		break;
+	case BIT(DRM_ROTATE_90):
+		tmp = *r;
+		r->x1 = width - tmp.y2;
+		r->x2 = width - tmp.y1;
+		r->y1 = tmp.x1;
+		r->y2 = tmp.x2;
+		break;
+	case BIT(DRM_ROTATE_180):
+		tmp = *r;
+		r->x1 = width - tmp.x2;
+		r->x2 = width - tmp.x1;
+		r->y1 = height - tmp.y2;
+		r->y2 = height - tmp.y1;
+		break;
+	case BIT(DRM_ROTATE_270):
+		tmp = *r;
+		r->x1 = tmp.y1;
+		r->x2 = tmp.y2;
+		r->y1 = height - tmp.x2;
+		r->y2 = height - tmp.x1;
+		break;
+	default:
+		break;
+	}
+
+	if (rotation & (BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y))) {
+		tmp = *r;
+
+		if (rotation & BIT(DRM_REFLECT_X)) {
+			r->x1 = width - tmp.x2;
+			r->x2 = width - tmp.x1;
+		}
+
+		if (rotation & BIT(DRM_REFLECT_Y)) {
+			r->y1 = height - tmp.y2;
+			r->y2 = height - tmp.y1;
+		}
+	}
+}
+EXPORT_SYMBOL(drm_rect_rotate_inv);
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index d128629..26bb55e 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -163,5 +163,11 @@ int drm_rect_calc_vscale_relaxed(struct drm_rect *src,
 				 struct drm_rect *dst,
 				 int min_vscale, int max_vscale);
 void drm_rect_debug_print(const struct drm_rect *r, bool fixed_point);
+void drm_rect_rotate(struct drm_rect *r,
+		     int width, int height,
+		     unsigned int rotation);
+void drm_rect_rotate_inv(struct drm_rect *r,
+			 int width, int height,
+			 unsigned int rotation);
 
 #endif
-- 
1.8.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 06/12] drm: Add drm_rotation_simplify()

[sagar.a.kamble]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm_rotation_simplify() can be used to eliminate unsupported rotation
flags. It will check if any unsupported flags are present, and if so
it will modify the rotation to an alternate form by adding 180 degrees
to rotation angle, and flipping the reflect x and y bits. The hope is
that this identity transform will eliminate the unsupported flags.

Of course that might not result in any more supported rotation, so
the caller is still responsible for checking the result afterwards.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/drm_crtc.c | 30 ++++++++++++++++++++++++++++++
 include/drm/drm_crtc.h     |  2 ++
 2 files changed, 32 insertions(+)

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 4983c6e..4f5e408 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -4006,6 +4006,36 @@ int drm_format_vert_chroma_subsampling(uint32_t format)
 EXPORT_SYMBOL(drm_format_vert_chroma_subsampling);
 
 /**
+ * drm_rotation_simplify() - Try to simplify the rotation
+ * @rotation: Rotation to be simplified
+ * @supported_rotations: Supported rotations
+ *
+ * Attempt to simplify the rotation to a form that is supported.
+ * Eg. if the hardware supports everything except DRM_REFLECT_X
+ * one could call this function like this:
+ *
+ * drm_rotation_simplify(rotation, BIT(DRM_ROTATE_0) |
+ *                       BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_180) |
+ *                       BIT(DRM_ROTATE_270) | BIT(DRM_REFLECT_Y));
+ *
+ * to eliminate the DRM_ROTATE_X flag. Depending on what kind of
+ * transforms the hardware supports, this function may not
+ * be able to produce a supported transform, so the caller should
+ * check the result afterwards.
+ */
+unsigned int drm_rotation_simplify(unsigned int rotation,
+				   unsigned int supported_rotations)
+{
+	if (rotation & ~supported_rotations) {
+		rotation ^= BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y);
+		rotation = (rotation & ~0xf) | BIT((ffs(rotation & 0xf) + 1) % 4);
+	}
+
+	return rotation;
+}
+EXPORT_SYMBOL(drm_rotation_simplify);
+
+/**
  * drm_mode_config_init - initialize DRM mode_configuration structure
  * @dev: DRM device
  *
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 4b3ac70..18f2eed 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1185,6 +1185,8 @@ extern int drm_format_vert_chroma_subsampling(uint32_t format);
 extern const char *drm_get_format_name(uint32_t format);
 extern struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
 							      unsigned int supported_rotations);
+extern unsigned int drm_rotation_simplify(unsigned int rotation,
+					  unsigned int supported_rotations);
 
 /* Helpers */
 static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
-- 
1.8.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 07/12] drm/i915: Add 180 degree sprite rotation support

[sagar.a.kamble]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

The sprite planes (in fact all display planes starting from gen4)
support 180 degree rotation. Add the relevant low level bits to the
sprite code to make use of that feature.

The upper layers are not yet plugged in.

v2: HSW handles the rotated buffer offset automagically

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h     |  3 +++
 drivers/gpu/drm/i915/intel_drv.h    |  1 +
 drivers/gpu/drm/i915/intel_sprite.c | 37 +++++++++++++++++++++++++++++++++++++
 3 files changed, 41 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index abd18cd..57906c5 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3637,6 +3637,7 @@
 #define   DVS_YUV_ORDER_UYVY	(1<<16)
 #define   DVS_YUV_ORDER_YVYU	(2<<16)
 #define   DVS_YUV_ORDER_VYUY	(3<<16)
+#define   DVS_ROTATE_180	(1<<15)
 #define   DVS_DEST_KEY		(1<<2)
 #define   DVS_TRICKLE_FEED_DISABLE (1<<14)
 #define   DVS_TILED		(1<<10)
@@ -3707,6 +3708,7 @@
 #define   SPRITE_YUV_ORDER_UYVY		(1<<16)
 #define   SPRITE_YUV_ORDER_YVYU		(2<<16)
 #define   SPRITE_YUV_ORDER_VYUY		(3<<16)
+#define   SPRITE_ROTATE_180		(1<<15)
 #define   SPRITE_TRICKLE_FEED_DISABLE	(1<<14)
 #define   SPRITE_INT_GAMMA_ENABLE	(1<<13)
 #define   SPRITE_TILED			(1<<10)
@@ -3780,6 +3782,7 @@
 #define   SP_YUV_ORDER_UYVY		(1<<16)
 #define   SP_YUV_ORDER_YVYU		(2<<16)
 #define   SP_YUV_ORDER_VYUY		(3<<16)
+#define   SP_ROTATE_180			(1<<15)
 #define   SP_TILED			(1<<10)
 #define _SPALINOFF		(VLV_DISPLAY_BASE + 0x72184)
 #define _SPASTRIDE		(VLV_DISPLAY_BASE + 0x72188)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 44067bc..85864fc 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -397,6 +397,7 @@ struct intel_plane {
 	unsigned int crtc_w, crtc_h;
 	uint32_t src_x, src_y;
 	uint32_t src_w, src_h;
+	unsigned int rotation;
 
 	/* Since we need to change the watermarks before/after
 	 * enabling/disabling the planes, we need to store the parameters here
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 336ae6c..477d4d7 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -60,6 +60,7 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 	sprctl &= ~SP_PIXFORMAT_MASK;
 	sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
 	sprctl &= ~SP_TILED;
+	sprctl &= ~SP_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_YUYV:
@@ -131,6 +132,14 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 							fb->pitches[0]);
 	linear_offset -= sprsurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		sprctl |= SP_ROTATE_180;
+
+		x += src_w;
+		y += src_h;
+		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+	}
+
 	I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]);
 	I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x);
 
@@ -238,6 +247,7 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	sprctl &= ~SPRITE_RGB_ORDER_RGBX;
 	sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
 	sprctl &= ~SPRITE_TILED;
+	sprctl &= ~SPRITE_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
@@ -299,6 +309,17 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 					       pixel_size, fb->pitches[0]);
 	linear_offset -= sprsurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		sprctl |= SPRITE_ROTATE_180;
+
+		/* HSW does this automagically in hardware */
+		if (!IS_HASWELL(dev)) {
+			x += src_w;
+			y += src_h;
+			linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+		}
+	}
+
 	I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
 	I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
 
@@ -422,6 +443,7 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	dvscntr &= ~DVS_RGB_ORDER_XBGR;
 	dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
 	dvscntr &= ~DVS_TILED;
+	dvscntr &= ~DVS_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
@@ -478,6 +500,14 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 					       pixel_size, fb->pitches[0]);
 	linear_offset -= dvssurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		dvscntr |= DVS_ROTATE_180;
+
+		x += src_w;
+		y += src_h;
+		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+	}
+
 	I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
 	I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
 
@@ -739,6 +769,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	max_scale = intel_plane->max_downscale << 16;
 	min_scale = intel_plane->can_scale ? 1 : (1 << 16);
 
+	drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
+			intel_plane->rotation);
+
 	hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
 	BUG_ON(hscale < 0);
 
@@ -777,6 +810,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 				     drm_rect_width(&dst) * hscale - drm_rect_width(&src),
 				     drm_rect_height(&dst) * vscale - drm_rect_height(&src));
 
+		drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
+				    intel_plane->rotation);
+
 		/* sanity check to make sure the src viewport wasn't enlarged */
 		WARN_ON(src.x1 < (int) src_x ||
 			src.y1 < (int) src_y ||
@@ -1141,6 +1177,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 
 	intel_plane->pipe = pipe;
 	intel_plane->plane = plane;
+	intel_plane->rotation = BIT(DRM_ROTATE_0);
 	possible_crtcs = (1 << pipe);
 	ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs,
 			     &intel_plane_funcs,
-- 
1.8.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 08/12] drm/i915: Make intel_plane_restore() return an error

[sagar.a.kamble]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Propagate the error from intel_update_plane() up through
intel_plane_restore() to the caller. This will be used for
rollback purposes when setting properties fails.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/i915/intel_drv.h    |  2 +-
 drivers/gpu/drm/i915/intel_sprite.c | 14 +++++++-------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 85864fc..7a79b8e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -897,7 +897,7 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob);
 int intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane);
 void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
 			       enum plane plane);
-void intel_plane_restore(struct drm_plane *plane);
+int intel_plane_restore(struct drm_plane *plane);
 void intel_plane_disable(struct drm_plane *plane);
 int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
 			      struct drm_file *file_priv);
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 477d4d7..511934c 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -1047,18 +1047,18 @@ out_unlock:
 	return ret;
 }
 
-void intel_plane_restore(struct drm_plane *plane)
+int intel_plane_restore(struct drm_plane *plane)
 {
 	struct intel_plane *intel_plane = to_intel_plane(plane);
 
 	if (!plane->crtc || !plane->fb)
-		return;
+		return 0;
 
-	intel_update_plane(plane, plane->crtc, plane->fb,
-			   intel_plane->crtc_x, intel_plane->crtc_y,
-			   intel_plane->crtc_w, intel_plane->crtc_h,
-			   intel_plane->src_x, intel_plane->src_y,
-			   intel_plane->src_w, intel_plane->src_h);
+	return intel_update_plane(plane, plane->crtc, plane->fb,
+				  intel_plane->crtc_x, intel_plane->crtc_y,
+				  intel_plane->crtc_w, intel_plane->crtc_h,
+				  intel_plane->src_x, intel_plane->src_y,
+				  intel_plane->src_w, intel_plane->src_h);
 }
 
 void intel_plane_disable(struct drm_plane *plane)
-- 
1.8.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 09/12] drm/i915: Add rotation property for sprites

[sagar.a.kamble]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Sprite planes support 180 degree rotation. The lower layers are now in
place, so hook in the standard rotation property to expose the feature
to the users.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h     |  1 +
 drivers/gpu/drm/i915/intel_sprite.c | 42 ++++++++++++++++++++++++++++++++++++-
 2 files changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index fa37dfd..ea2efc3 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1548,6 +1548,7 @@ typedef struct drm_i915_private {
 
 	struct drm_property *broadcast_rgb_property;
 	struct drm_property *force_audio_property;
+	struct drm_property *rotation_property;
 
 	uint32_t hw_context_size;
 	struct list_head context_list;
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 511934c..62b9f84 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -1047,6 +1047,30 @@ out_unlock:
 	return ret;
 }
 
+static int intel_plane_set_property(struct drm_plane *plane,
+				    struct drm_property *prop,
+				    uint64_t val)
+{
+	struct drm_i915_private *dev_priv = plane->dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	uint64_t old_val;
+	int ret = -ENOENT;
+
+	if (prop == dev_priv->rotation_property) {
+		/* exactly one rotation angle please */
+		if (hweight32(val & 0xf) != 1)
+			return -EINVAL;
+
+		old_val = intel_plane->rotation;
+		intel_plane->rotation = val;
+		ret = intel_plane_restore(plane);
+		if (ret)
+			intel_plane->rotation = old_val;
+	}
+
+	return ret;
+}
+
 int intel_plane_restore(struct drm_plane *plane)
 {
 	struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -1073,6 +1097,7 @@ static const struct drm_plane_funcs intel_plane_funcs = {
 	.update_plane = intel_update_plane,
 	.disable_plane = intel_disable_plane,
 	.destroy = intel_destroy_plane,
+	.set_property = intel_plane_set_property,
 };
 
 static uint32_t ilk_plane_formats[] = {
@@ -1109,6 +1134,7 @@ static uint32_t vlv_plane_formats[] = {
 int
 intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_plane *intel_plane;
 	unsigned long possible_crtcs;
 	const uint32_t *plane_formats;
@@ -1183,8 +1209,22 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 			     &intel_plane_funcs,
 			     plane_formats, num_plane_formats,
 			     false);
-	if (ret)
+	if (ret) {
 		kfree(intel_plane);
+		goto out;
+	}
+
+	if (!dev_priv->rotation_property)
+		dev_priv->rotation_property =
+			drm_mode_create_rotation_property(dev,
+							  BIT(DRM_ROTATE_0) |
+							  BIT(DRM_ROTATE_180));
+
+	if (dev_priv->rotation_property)
+		drm_object_attach_property(&intel_plane->base.base,
+					   dev_priv->rotation_property,
+					   intel_plane->rotation);
 
+ out:
 	return ret;
 }
-- 
1.8.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 10/12] drm/i915: Add 180 degree primary plane rotation support

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

Primary planes support 180 degree rotation. Expose the feature
through rotation drm property.

v2: Calculating linear/tiled offsets based on pipe source width and
height. Added 180 degree rotation support in ironlake_update_plane.

v3: Checking if CRTC is active before issueing update_plane. Added
wait for vblank to make sure we dont overtake page flips. Disabling
FBC since it does not work with rotated planes.

Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h      |  1 +
 drivers/gpu/drm/i915/intel_display.c | 75 ++++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_drv.h     |  2 +
 3 files changed, 74 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 57906c5..d3000c4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3553,6 +3553,7 @@
 #define   DISPPLANE_NO_LINE_DOUBLE		0
 #define   DISPPLANE_STEREO_POLARITY_FIRST	0
 #define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
+#define   DISPPLANE_ROTATE_180			(1<<15)
 #define   DISPPLANE_TRICKLE_FEED_DISABLE	(1<<14) /* Ironlake */
 #define   DISPPLANE_TILED			(1<<10)
 #define _DSPAADDR		(dev_priv->info->display_mmio_offset + 0x70184)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 4d4a0d9..961308d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2037,6 +2037,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 	unsigned long linear_offset;
 	u32 dspcntr;
 	u32 reg;
+	int pixel_size;
 
 	switch (plane) {
 	case 0:
@@ -2047,6 +2048,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 		return -EINVAL;
 	}
 
+	pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
 	intel_fb = to_intel_framebuffer(fb);
 	obj = intel_fb->obj;
 
@@ -2054,6 +2056,8 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 	dspcntr = I915_READ(reg);
 	/* Mask out pixel format bits in case we change it */
 	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+	dspcntr &= ~DISPPLANE_ROTATE_180;
+
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_C8:
 		dspcntr |= DISPPLANE_8BPP;
@@ -2095,8 +2099,6 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 	if (IS_G4X(dev))
 		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
 
-	I915_WRITE(reg, dspcntr);
-
 	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
 
 	if (INTEL_INFO(dev)->gen >= 4) {
@@ -2109,6 +2111,17 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 		intel_crtc->dspaddr_offset = linear_offset;
 	}
 
+	if (intel_crtc->rotation == BIT(DRM_ROTATE_180)) {
+		dspcntr |= DISPPLANE_ROTATE_180;
+
+		x += (intel_crtc->config.pipe_src_w - 1);
+		y += (intel_crtc->config.pipe_src_h - 1);
+		linear_offset += (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
+                                   intel_crtc->config.pipe_src_w * pixel_size;
+	}
+
+	I915_WRITE(reg, dspcntr);
+
 	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
 		      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
 		      fb->pitches[0]);
@@ -2137,6 +2150,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
 	unsigned long linear_offset;
 	u32 dspcntr;
 	u32 reg;
+	int pixel_size;
 
 	switch (plane) {
 	case 0:
@@ -2148,6 +2162,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
 		return -EINVAL;
 	}
 
+	pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
 	intel_fb = to_intel_framebuffer(fb);
 	obj = intel_fb->obj;
 
@@ -2155,6 +2170,8 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
 	dspcntr = I915_READ(reg);
 	/* Mask out pixel format bits in case we change it */
 	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+	dspcntr &= ~DISPPLANE_ROTATE_180;
+
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_C8:
 		dspcntr |= DISPPLANE_8BPP;
@@ -2192,8 +2209,6 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
 	else
 		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
 
-	I915_WRITE(reg, dspcntr);
-
 	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
 	intel_crtc->dspaddr_offset =
 		intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
@@ -2201,6 +2216,19 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
 					       fb->pitches[0]);
 	linear_offset -= intel_crtc->dspaddr_offset;
 
+	if (intel_crtc->rotation == BIT(DRM_ROTATE_180)) {
+		dspcntr |= DISPPLANE_ROTATE_180;
+
+		if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
+			x += (intel_crtc->config.pipe_src_w - 1);
+			y += (intel_crtc->config.pipe_src_h - 1);
+			linear_offset += (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
+					intel_crtc->config.pipe_src_w * pixel_size;
+		}
+	}
+
+	I915_WRITE(reg, dspcntr);
+
 	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
 		      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
 		      fb->pitches[0]);
@@ -8748,6 +8776,33 @@ free_work:
 	return ret;
 }
 
+static int intel_crtc_set_property(struct drm_crtc *crtc,
+				    struct drm_property *prop,
+				    uint64_t val)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	uint64_t old_val;
+	int ret = -ENOENT;
+
+	if ((prop == dev_priv->rotation_property) && intel_crtc->active) {
+		/* exactly one rotation angle please */
+		if (hweight32(val & 0xf) != 1)
+			return -EINVAL;
+
+		old_val = intel_crtc->rotation;
+		intel_crtc->rotation = val;
+		intel_wait_for_vblank(dev, intel_crtc->pipe);
+		intel_disable_fbc(dev);
+		ret = dev_priv->display.update_plane(crtc, crtc->fb, 0, 0);
+		if (ret)
+			intel_crtc->rotation = old_val;
+	}
+
+	return ret;
+}
+
 static struct drm_crtc_helper_funcs intel_helper_funcs = {
 	.mode_set_base_atomic = intel_pipe_set_base_atomic,
 	.load_lut = intel_crtc_load_lut,
@@ -10160,6 +10215,7 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
 	.set_config = intel_crtc_set_config,
 	.destroy = intel_crtc_destroy,
 	.page_flip = intel_crtc_page_flip,
+	.set_property = intel_crtc_set_property
 };
 
 static void intel_cpu_pll_init(struct drm_device *dev)
@@ -10288,6 +10344,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 	 */
 	intel_crtc->pipe = pipe;
 	intel_crtc->plane = pipe;
+	intel_crtc->rotation = BIT(DRM_ROTATE_0);
 	if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
 		DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
 		intel_crtc->plane = !pipe;
@@ -10298,6 +10355,16 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 	dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
 	dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
 
+	if (!dev_priv->rotation_property)
+		dev_priv->rotation_property =
+			drm_mode_create_rotation_property(dev,
+							BIT(DRM_ROTATE_0) |
+							BIT(DRM_ROTATE_180));
+	if (dev_priv->rotation_property)
+		drm_object_attach_property(&intel_crtc->base.base,
+					dev_priv->rotation_property,
+					intel_crtc->rotation);
+
 	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
 }
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 7a79b8e..02dfdb6 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -331,6 +331,8 @@ struct intel_crtc {
 	struct drm_crtc base;
 	enum pipe pipe;
 	enum plane plane;
+	unsigned int rotation;
+
 	u8 lut_r[256], lut_g[256], lut_b[256];
 	/*
 	 * Whether the crtc and the connected output pipeline is active. Implies
-- 
1.8.5

[PATCH v3 11/12] drm: Set property to return invalid for unsupported arguments for bitmask property

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

DRM will not propagate the set_property call for bitmask drm
properties if they are not supported by underlying driver.

Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/drm_crtc.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 4f5e408..4c92741 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -3420,6 +3420,8 @@ int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
 	struct drm_mode_object *arg_obj;
 	struct drm_mode_object *prop_obj;
 	struct drm_property *property;
+	struct drm_property_enum *prop_enum;
+	bool supported_val = false;
 	int ret = -EINVAL;
 	int i;
 
@@ -3451,6 +3453,22 @@ int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
 	}
 	property = obj_to_property(prop_obj);
 
+	if (property->flags | DRM_MODE_PROP_BITMASK) {
+		if (!list_empty(&property->enum_blob_list)) {
+			list_for_each_entry(prop_enum,
+					&property->enum_blob_list, head) {
+				if (BIT(prop_enum->value) == arg->value) {
+					supported_val = true;
+					break;
+				}
+			}
+		}
+		if (!supported_val) {
+			ret = -EINVAL;
+			goto out;
+		}
+	}
+
 	if (!drm_property_change_is_valid(property, arg->value))
 		goto out;
 
-- 
1.8.5

[PATCH v3 12/12] drm/i915: Removing rotate and inverse rotate calls from update_plane

[sagar.a.kamble]

From: Sagar Kamble <sagar.a.kamble@intel.com>

With clipped sprites these transformations are not working. these
functions transform complete sprite irrespective of clipping present.
This leads to invisible portion of sprite show up when rotate 180 if
it was out of visible area before.

Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/i915/intel_sprite.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 62b9f84..e7e4c55 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -769,9 +769,6 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	max_scale = intel_plane->max_downscale << 16;
 	min_scale = intel_plane->can_scale ? 1 : (1 << 16);
 
-	drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
-			intel_plane->rotation);
-
 	hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
 	BUG_ON(hscale < 0);
 
@@ -810,9 +807,6 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 				     drm_rect_width(&dst) * hscale - drm_rect_width(&src),
 				     drm_rect_height(&dst) * vscale - drm_rect_height(&src));
 
-		drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
-				    intel_plane->rotation);
-
 		/* sanity check to make sure the src viewport wasn't enlarged */
 		WARN_ON(src.x1 < (int) src_x ||
 			src.y1 < (int) src_y ||
-- 
1.8.5

Re: [PATCH v3 12/12] drm/i915: Removing rotate and inverse rotate calls from update_plane

[Ville Syrjälä]

On Thu, Feb 06, 2014 at 08:34:53PM +0530, sagar.a.kamble@intel.com wrote:
> From: Sagar Kamble <sagar.a.kamble@intel.com>
> 
> With clipped sprites these transformations are not working. these
> functions transform complete sprite irrespective of clipping present.
> This leads to invisible portion of sprite show up when rotate 180 if
> it was out of visible area before.

We need to orient the src and dst coordinates the same way to make
clipping come out right, and then go back to the original orientation to
make our src buffer offset calculation work out. I'm pretty sure this was
working exactly as inteded for me.

If the code is actually buggy, I'm going to want a test case that
demonstrates that bug.

> 
> Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
> Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_sprite.c | 6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index 62b9f84..e7e4c55 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -769,9 +769,6 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  	max_scale = intel_plane->max_downscale << 16;
>  	min_scale = intel_plane->can_scale ? 1 : (1 << 16);
>  
> -	drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
> -			intel_plane->rotation);
> -
>  	hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
>  	BUG_ON(hscale < 0);
>  
> @@ -810,9 +807,6 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  				     drm_rect_width(&dst) * hscale - drm_rect_width(&src),
>  				     drm_rect_height(&dst) * vscale - drm_rect_height(&src));
>  
> -		drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
> -				    intel_plane->rotation);
> -
>  		/* sanity check to make sure the src viewport wasn't enlarged */
>  		WARN_ON(src.x1 < (int) src_x ||
>  			src.y1 < (int) src_y ||
> -- 
> 1.8.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC

Re: [PATCH v3 10/12] drm/i915: Add 180 degree primary plane rotation support

[Ville Syrjälä]

On Thu, Feb 06, 2014 at 08:34:51PM +0530, sagar.a.kamble@intel.com wrote:
> From: Sagar Kamble <sagar.a.kamble@intel.com>
> 
> Primary planes support 180 degree rotation. Expose the feature
> through rotation drm property.
> 
> v2: Calculating linear/tiled offsets based on pipe source width and
> height. Added 180 degree rotation support in ironlake_update_plane.
> 
> v3: Checking if CRTC is active before issueing update_plane. Added
> wait for vblank to make sure we dont overtake page flips. Disabling
> FBC since it does not work with rotated planes.
> 
> Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
> Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h      |  1 +
>  drivers/gpu/drm/i915/intel_display.c | 75 ++++++++++++++++++++++++++++++++++--
>  drivers/gpu/drm/i915/intel_drv.h     |  2 +
>  3 files changed, 74 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 57906c5..d3000c4 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3553,6 +3553,7 @@
>  #define   DISPPLANE_NO_LINE_DOUBLE		0
>  #define   DISPPLANE_STEREO_POLARITY_FIRST	0
>  #define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
> +#define   DISPPLANE_ROTATE_180			(1<<15)
>  #define   DISPPLANE_TRICKLE_FEED_DISABLE	(1<<14) /* Ironlake */
>  #define   DISPPLANE_TILED			(1<<10)
>  #define _DSPAADDR		(dev_priv->info->display_mmio_offset + 0x70184)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 4d4a0d9..961308d 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2037,6 +2037,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  	unsigned long linear_offset;
>  	u32 dspcntr;
>  	u32 reg;
> +	int pixel_size;
>  
>  	switch (plane) {
>  	case 0:
> @@ -2047,6 +2048,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  		return -EINVAL;
>  	}
>  
> +	pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
>  	intel_fb = to_intel_framebuffer(fb);
>  	obj = intel_fb->obj;
>  
> @@ -2054,6 +2056,8 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  	dspcntr = I915_READ(reg);
>  	/* Mask out pixel format bits in case we change it */
>  	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
> +	dspcntr &= ~DISPPLANE_ROTATE_180;
> +
>  	switch (fb->pixel_format) {
>  	case DRM_FORMAT_C8:
>  		dspcntr |= DISPPLANE_8BPP;
> @@ -2095,8 +2099,6 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  	if (IS_G4X(dev))
>  		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
>  
> -	I915_WRITE(reg, dspcntr);
> -
>  	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
>  
>  	if (INTEL_INFO(dev)->gen >= 4) {
> @@ -2109,6 +2111,17 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  		intel_crtc->dspaddr_offset = linear_offset;
>  	}
>  
> +	if (intel_crtc->rotation == BIT(DRM_ROTATE_180)) {
> +		dspcntr |= DISPPLANE_ROTATE_180;
> +
> +		x += (intel_crtc->config.pipe_src_w - 1);
> +		y += (intel_crtc->config.pipe_src_h - 1);
> +		linear_offset += (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
> +                                   intel_crtc->config.pipe_src_w * pixel_size;
> +	}
> +
> +	I915_WRITE(reg, dspcntr);
> +
>  	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
>  		      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
>  		      fb->pitches[0]);
> @@ -2137,6 +2150,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
>  	unsigned long linear_offset;
>  	u32 dspcntr;
>  	u32 reg;
> +	int pixel_size;
>  
>  	switch (plane) {
>  	case 0:
> @@ -2148,6 +2162,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
>  		return -EINVAL;
>  	}
>  
> +	pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
>  	intel_fb = to_intel_framebuffer(fb);
>  	obj = intel_fb->obj;
>  
> @@ -2155,6 +2170,8 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
>  	dspcntr = I915_READ(reg);
>  	/* Mask out pixel format bits in case we change it */
>  	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
> +	dspcntr &= ~DISPPLANE_ROTATE_180;
> +
>  	switch (fb->pixel_format) {
>  	case DRM_FORMAT_C8:
>  		dspcntr |= DISPPLANE_8BPP;
> @@ -2192,8 +2209,6 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
>  	else
>  		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
>  
> -	I915_WRITE(reg, dspcntr);
> -
>  	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
>  	intel_crtc->dspaddr_offset =
>  		intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
> @@ -2201,6 +2216,19 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
>  					       fb->pitches[0]);
>  	linear_offset -= intel_crtc->dspaddr_offset;
>  
> +	if (intel_crtc->rotation == BIT(DRM_ROTATE_180)) {
> +		dspcntr |= DISPPLANE_ROTATE_180;
> +
> +		if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
> +			x += (intel_crtc->config.pipe_src_w - 1);
> +			y += (intel_crtc->config.pipe_src_h - 1);
> +			linear_offset += (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
> +					intel_crtc->config.pipe_src_w * pixel_size;
> +		}
> +	}
> +
> +	I915_WRITE(reg, dspcntr);
> +
>  	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
>  		      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
>  		      fb->pitches[0]);
> @@ -8748,6 +8776,33 @@ free_work:
>  	return ret;
>  }
>  
> +static int intel_crtc_set_property(struct drm_crtc *crtc,
> +				    struct drm_property *prop,
> +				    uint64_t val)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	uint64_t old_val;
> +	int ret = -ENOENT;
> +
> +	if ((prop == dev_priv->rotation_property) && intel_crtc->active) {

We still want to accept the prop change if the crtc is not active. We
just need to skip the actual hardware frobbing.

This also exposes another problem we have. What it the current master
has enabled rotation, and then exits. Ideally I'd like each master to
maintain its own full state, but since we don't have that currently,
I think we might need to do some selective property resetting when
switching masters. Looks like omapdrm does that in lastclose for the
rotation props. So I suppose we want to follow suite for now.

> +		/* exactly one rotation angle please */
> +		if (hweight32(val & 0xf) != 1)
> +			return -EINVAL;
> +
> +		old_val = intel_crtc->rotation;
> +		intel_crtc->rotation = val;
> +		intel_wait_for_vblank(dev, intel_crtc->pipe);

That should be:
intel_crtc_wait_for_pending_flips(crtc);

> +		intel_disable_fbc(dev);

That could be a bit more selective:

if (dev_priv->fbc.plane == plane &&
    INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev))
	intel_disable_fbc(dev);

Also intel_update_fbc() would need similar checks so that it won't
accidentally re-enable FBC on a rotated plane.

> +		ret = dev_priv->display.update_plane(crtc, crtc->fb, 0, 0);
> +		if (ret)
> +			intel_crtc->rotation = old_val;
> +	}
> +
> +	return ret;
> +}
> +
>  static struct drm_crtc_helper_funcs intel_helper_funcs = {
>  	.mode_set_base_atomic = intel_pipe_set_base_atomic,
>  	.load_lut = intel_crtc_load_lut,
> @@ -10160,6 +10215,7 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
>  	.set_config = intel_crtc_set_config,
>  	.destroy = intel_crtc_destroy,
>  	.page_flip = intel_crtc_page_flip,
> +	.set_property = intel_crtc_set_property
>  };
>  
>  static void intel_cpu_pll_init(struct drm_device *dev)
> @@ -10288,6 +10344,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
>  	 */
>  	intel_crtc->pipe = pipe;
>  	intel_crtc->plane = pipe;
> +	intel_crtc->rotation = BIT(DRM_ROTATE_0);
>  	if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
>  		DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
>  		intel_crtc->plane = !pipe;
> @@ -10298,6 +10355,16 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
>  	dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
>  	dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
>  
> +	if (!dev_priv->rotation_property)
> +		dev_priv->rotation_property =
> +			drm_mode_create_rotation_property(dev,
> +							BIT(DRM_ROTATE_0) |
> +							BIT(DRM_ROTATE_180));
> +	if (dev_priv->rotation_property)
> +		drm_object_attach_property(&intel_crtc->base.base,
> +					dev_priv->rotation_property,
> +					intel_crtc->rotation);
> +

Still missing the gen checks:

if (INTEL_INFO(dev)->gen >= 4) {
  ... add rotation prop ...
}

>  	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
>  }
>  
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 7a79b8e..02dfdb6 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -331,6 +331,8 @@ struct intel_crtc {
>  	struct drm_crtc base;
>  	enum pipe pipe;
>  	enum plane plane;
> +	unsigned int rotation;
> +
>  	u8 lut_r[256], lut_g[256], lut_b[256];
>  	/*
>  	 * Whether the crtc and the connected output pipeline is active. Implies
> -- 
> 1.8.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC

Re: [PATCH v3 11/12] drm: Set property to return invalid for unsupported arguments for bitmask property

[Ville Syrjälä]

On Thu, Feb 06, 2014 at 08:34:52PM +0530, sagar.a.kamble@intel.com wrote:
> From: Sagar Kamble <sagar.a.kamble@intel.com>
> 
> DRM will not propagate the set_property call for bitmask drm
> properties if they are not supported by underlying driver.
> 
> Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
> Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>
> ---
>  drivers/gpu/drm/drm_crtc.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 4f5e408..4c92741 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -3420,6 +3420,8 @@ int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
>  	struct drm_mode_object *arg_obj;
>  	struct drm_mode_object *prop_obj;
>  	struct drm_property *property;
> +	struct drm_property_enum *prop_enum;
> +	bool supported_val = false;
>  	int ret = -EINVAL;
>  	int i;
>  
> @@ -3451,6 +3453,22 @@ int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
>  	}
>  	property = obj_to_property(prop_obj);
>  
> +	if (property->flags | DRM_MODE_PROP_BITMASK) {
> +		if (!list_empty(&property->enum_blob_list)) {
> +			list_for_each_entry(prop_enum,
> +					&property->enum_blob_list, head) {
> +				if (BIT(prop_enum->value) == arg->value) {
> +					supported_val = true;
> +					break;
> +				}
> +			}
> +		}
> +		if (!supported_val) {
> +			ret = -EINVAL;
> +			goto out;
> +		}
> +	}
> +
>  	if (!drm_property_change_is_valid(property, arg->value))

drm_property_change_is_valid() should take care of this, except I think
my original patch to pass the supported_bits information is a bit buggy.
It will allocate the values[] array based on all possible rotation bits,
but then it will populate it sparsely based on the supported_bits.

Apparently that needs to be changed to allocate only the required amount
of space in values[]. I think that should make
drm_property_change_is_valid() correctly detect the valid bits.

Actually I think even my buggy patch should mostly work, it'll just
always accept DRM_ROTATE_0 even if that wasnt't one of the
supported_bits. That's because since values[] is zeroed initially.

Oh, I see your patch does actually a bit more than that. It would reject
any bitmask property change with multiple bits set. That's not what we
want, as the driver is the only one that can decide which combination(s)
of bits are in fact valid.

-- 
Ville Syrjälä
Intel OTC

Re: [PATCH v3 00/12] Enabling 180 degree rotation for sprite and crtc planes

[Ville Syrjälä]

On Thu, Feb 06, 2014 at 08:34:41PM +0530, sagar.a.kamble@intel.com wrote:
> From: Sagar Kamble <sagar.a.kamble@intel.com>
> 
> These patches will enable 180 degree rotation for CRTC and Sprite planes. This
> version has following changes:
> 1. Addressed review comments for CRTC rotation from FBC, page flip, CRTC active/
> inactive perspective.
> 2. Removed drm_rect_rotate amd drm_rect_rotate_inv functions as they dont take
> care of clipped planes and 180 rotation in that case produces invalid result.
> 
> Sagar Kamble (3):
>   drm/i915: Add 180 degree primary plane rotation support
>   drm: Set property to return invalid for unsupported arguments for
>     bitmask property
>   drm/i915: Removing rotate and inverse rotate calls from update_plane
> 
> Ville Syrjälä (9):
>   drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h
>   drm: Add support_bits parameter to drm_property_create_bitmask()
>   drm: Add drm_mode_create_rotation_property()
>   drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()
>   drm: Add drm_rect rotation functions
>   drm: Add drm_rotation_simplify()
>   drm/i915: Add 180 degree sprite rotation support
>   drm/i915: Make intel_plane_restore() return an error
>   drm/i915: Add rotation property for sprites

Oh I forgot to mention it last time around, since this series touches
more than i915, it should be cc:ed to dri-devel as well.

> 
>  drivers/gpu/drm/drm_crtc.c           |  72 +++++++++++++++++-
>  drivers/gpu/drm/drm_rect.c           | 140 +++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/i915_drv.h      |   1 +
>  drivers/gpu/drm/i915/i915_reg.h      |   4 +
>  drivers/gpu/drm/i915/intel_display.c |  75 ++++++++++++++++++-
>  drivers/gpu/drm/i915/intel_drv.h     |   5 +-
>  drivers/gpu/drm/i915/intel_sprite.c  |  87 ++++++++++++++++++++--
>  drivers/gpu/drm/omapdrm/omap_drv.h   |   7 --
>  drivers/gpu/drm/omapdrm/omap_plane.c |  17 ++---
>  include/drm/drm_crtc.h               |  15 +++-
>  include/drm/drm_rect.h               |   6 ++
>  11 files changed, 397 insertions(+), 32 deletions(-)
> 
> -- 
> 1.8.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC

Re: [PATCH v3 01/12] drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h

[Daniel Vetter]

On Thu, Feb 06, 2014 at 08:34:42PM +0530, sagar.a.kamble@intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> The rotation property stuff should be standardized among all drivers.
> Move the bits to drm_crtc.h from omap_drv.h.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>

Patches which touch code outside of i915 must be submitted to the
dri-devel mailing list. Also, since you're touching a driver please also
cc the driver maintainers/authors (Tomi/Rob in this case) so that they'll
notice the patch.

scripts/get_maintainers.pl can help you with adding a reasonable Cc: list
to the sob section of your patches.
-Daniel

> ---
>  drivers/gpu/drm/omapdrm/omap_drv.h | 7 -------
>  include/drm/drm_crtc.h             | 8 ++++++++
>  2 files changed, 8 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
> index 428b2981..aac8e10 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
> @@ -119,13 +119,6 @@ struct omap_drm_private {
>  	struct omap_drm_irq error_handler;
>  };
>  
> -/* this should probably be in drm-core to standardize amongst drivers */
> -#define DRM_ROTATE_0	0
> -#define DRM_ROTATE_90	1
> -#define DRM_ROTATE_180	2
> -#define DRM_ROTATE_270	3
> -#define DRM_REFLECT_X	4
> -#define DRM_REFLECT_Y	5
>  
>  #ifdef CONFIG_DEBUG_FS
>  int omap_debugfs_init(struct drm_minor *minor);
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 71727b6..d5c46c1 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -65,6 +65,14 @@ struct drm_object_properties {
>  	uint64_t values[DRM_OBJECT_MAX_PROPERTY];
>  };
>  
> +/* rotation property bits */
> +#define DRM_ROTATE_0	0
> +#define DRM_ROTATE_90	1
> +#define DRM_ROTATE_180	2
> +#define DRM_ROTATE_270	3
> +#define DRM_REFLECT_X	4
> +#define DRM_REFLECT_Y	5
> +
>  /*
>   * Note on terminology:  here, for brevity and convenience, we refer to connector
>   * control chips as 'CRTCs'.  They can control any type of connector, VGA, LVDS,
> -- 
> 1.8.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

Re: [PATCH v3 00/12] Enabling 180 degree rotation for sprite and crtc planes

[Daniel Vetter]

On Thu, Feb 06, 2014 at 06:29:15PM +0200, Ville Syrjälä wrote:
> On Thu, Feb 06, 2014 at 08:34:41PM +0530, sagar.a.kamble@intel.com wrote:
> > From: Sagar Kamble <sagar.a.kamble@intel.com>
> > 
> > These patches will enable 180 degree rotation for CRTC and Sprite planes. This
> > version has following changes:
> > 1. Addressed review comments for CRTC rotation from FBC, page flip, CRTC active/
> > inactive perspective.
> > 2. Removed drm_rect_rotate amd drm_rect_rotate_inv functions as they dont take
> > care of clipped planes and 180 rotation in that case produces invalid result.
> > 
> > Sagar Kamble (3):
> >   drm/i915: Add 180 degree primary plane rotation support
> >   drm: Set property to return invalid for unsupported arguments for
> >     bitmask property
> >   drm/i915: Removing rotate and inverse rotate calls from update_plane
> > 
> > Ville Syrjälä (9):
> >   drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h
> >   drm: Add support_bits parameter to drm_property_create_bitmask()
> >   drm: Add drm_mode_create_rotation_property()
> >   drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()
> >   drm: Add drm_rect rotation functions
> >   drm: Add drm_rotation_simplify()
> >   drm/i915: Add 180 degree sprite rotation support
> >   drm/i915: Make intel_plane_restore() return an error
> >   drm/i915: Add rotation property for sprites
> 
> Oh I forgot to mention it last time around, since this series touches
> more than i915, it should be cc:ed to dri-devel as well.

Ah, mail cross-over. Another process-thing: When resubmitting patches
please put a little changelog into both your cover letter and individual
patches. That way reviewers can quickly gauge what changed and concentrate
on looking at just those parts. That helps with streamline the review
process.
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch