Re: [PATCH 1/3] drm/i915: Track the enabled PM interrupts in dev_priv.

["Ville Syrjälä" <ville.syrjala@linux.intel.com>]

On Thu, Mar 13, 2014 at 09:30:16PM +0530, deepak.s@linux.intel.com wrote:
> From: Deepak S <deepak.s@intel.com>
> 
> When we use different rps events for different platform or due to wa, we
> mgiht end up doing (vs) everywahere. Insted of this, Let's use a variable
> in dev_priv to track the enabled PM interrupts
> 
> Signed-off-by: Deepak S <deepak.s@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/i915_drv.h |  1 +
>  drivers/gpu/drm/i915/i915_irq.c | 14 +++++++-------
>  drivers/gpu/drm/i915/intel_pm.c | 14 +++++++++-----
>  3 files changed, 17 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 70fbe90..d522313 100644
<snip>
> @@ -3311,6 +3311,8 @@ static void gen8_enable_rps(struct drm_device *dev)
>  		   GEN6_RP_UP_BUSY_AVG |
>  		   GEN6_RP_DOWN_IDLE_AVG);
>  
> +	dev_priv->pm_rps_events = GEN6_PM_RPS_EVENTS;
> +
>  	/* 6: Ring frequency + overclocking (our driver does this later */
>  
>  	gen6_set_rps(dev, (I915_READ(GEN6_GT_PERF_STATUS) & 0xff00) >> 8);
> @@ -3430,6 +3432,7 @@ static void gen6_enable_rps(struct drm_device *dev)
>  	dev_priv->rps.power = HIGH_POWER; /* force a reset */
>  	gen6_set_rps(dev_priv->dev, dev_priv->rps.min_delay);
>  
> +	dev_priv->pm_rps_events = GEN6_PM_RPS_EVENTS;
>  	gen6_enable_rps_interrupts(dev);
>  
>  	rc6vids = 0;
> @@ -3688,6 +3691,7 @@ static void valleyview_enable_rps(struct drm_device *dev)
>  	dev_priv->rps.rp_up_masked = false;
>  	dev_priv->rps.rp_down_masked = false;
>  
> +	dev_priv->pm_rps_events = GEN6_PM_RPS_EVENTS;
>  	gen6_enable_rps_interrupts(dev);
>  
>  	gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL);

I think we need to initialize pm_rps_events somewhere earlier since we
depend on it already in irq postinstall. Othwewise the patch looks
good.

-- 
Ville Syrjälä
Intel OTC