From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: sourab.gupta@intel.com
Cc: Akash Goel <akash.goel@intel.com>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 5/6] drm/i915/vlv:Implement the WA 'WaDisable_RenderCache_OperationalFlush'
Date: Tue, 1 Apr 2014 13:51:54 +0300 [thread overview]
Message-ID: <20140401105154.GD21652@intel.com> (raw)
In-Reply-To: <1395682207-7092-6-git-send-email-sourab.gupta@intel.com>
On Mon, Mar 24, 2014 at 11:00:06PM +0530, sourab.gupta@intel.com wrote:
> From: Akash Goel <akash.goel@intel.com>
>
> In Valleyview, Operational flush cannot be enabled on
> BWG A0 [Errata BWT006]
Apparently this has been busted ever since gen4. So I think either we
should disable it for all gen4+ platforms or we should trust that the
default value is 0. The default does seem to be disabled for everything,
but since there's a w/a name for it I'm not sure if we can trust that.
BDW is a bit weird since the bit has been repurposed for some GT3 thing.
Not sure what the deal is with !GT3.
>
> v2: Corrected the code regarding the wrong usage of
> MASKED_BIT_DISABLE (Chris)
>
> Signed-off-by: Akash Goel <akash.goel@intel.com>
> Signed-off-by: Sourab Gupta <sourab.gupta@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 3 +++
> drivers/gpu/drm/i915/intel_pm.c | 3 +++
> 2 files changed, 6 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index b922e38..266bfa1 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -972,6 +972,9 @@ enum punit_power_well {
> #define ECO_GATING_CX_ONLY (1<<3)
> #define ECO_FLIP_DONE (1<<0)
>
> +#define GEN7_CACHE_MODE_0 0x07000 /* IVB+ only */
> +#define GEN7_RC_OP_FLUSH_ENABLE (1<<0)
> +
> #define CACHE_MODE_0_GEN7 0x7000 /* IVB+ */
> #define HIZ_RAW_STALL_OPT_DISABLE (1<<2)
> #define CACHE_MODE_1 0x7004 /* IVB+ */
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index fd68f93..c3a8554 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -5068,6 +5068,9 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
> _MASKED_BIT_ENABLE(GEN7_MAX_PS_THREAD_DEP |
> GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
>
> + /* WaDisable_RenderCache_OperationalFlush:vlv */
> + I915_WRITE(GEN7_CACHE_MODE_0, _MASKED_BIT_DISABLE(GEN7_RC_OP_FLUSH_ENABLE));
> +
> /* WaForceL3Serialization:vlv */
> I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
> ~L3SQ_URB_READ_CAM_MATCH_DISABLE);
> --
> 1.8.5.1
--
Ville Syrjälä
Intel OTC
next prev parent reply other threads:[~2014-04-01 10:51 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-24 17:30 [PATCH 0/6] Rendering Specific HW Workarounds for VLV sourab.gupta
2014-03-24 17:30 ` [PATCH v4 1/6] drm/i915/vlv: Added a rendering specific Hw WA 'WaTlbInvalidateStoreDataBefore' sourab.gupta
2014-03-24 17:30 ` [PATCH v4 2/6] drm/i915/vlv: Added a rendering specific Hw WA 'WaSendDummy3dPrimitveAfterSetContext' sourab.gupta
2014-04-08 4:41 ` Gupta, Sourab
2014-04-14 9:45 ` [PATCH v5 " sourab.gupta
2014-05-28 9:57 ` Gupta, Sourab
2014-06-05 5:44 ` Gupta, Sourab
2014-03-24 17:30 ` [PATCH v2 3/6] drm/i915: Enabling the TLB invalidate bit in GFX Mode register sourab.gupta
2014-04-01 5:01 ` Gupta, Sourab
2014-04-02 11:34 ` Ville Syrjälä
2014-04-02 11:55 ` Daniel Vetter
2014-03-24 17:30 ` [PATCH 4/6] drm/i915/vlv: Remove the enabling of VS_TIMER_DISPATCH bit in MI MODE reg sourab.gupta
2014-03-24 17:47 ` Chris Wilson
2014-03-24 17:55 ` Gupta, Sourab
2014-03-24 18:01 ` Chris Wilson
2014-03-24 18:28 ` [PATCH v2 " sourab.gupta
2014-03-25 11:33 ` Ville Syrjälä
2014-03-25 12:31 ` [PATCH v3 4/6] drm/i915: " sourab.gupta
2014-03-25 13:11 ` Ville Syrjälä
2014-03-25 15:41 ` Daniel Vetter
2014-03-24 17:30 ` [PATCH v2 5/6] drm/i915/vlv:Implement the WA 'WaDisable_RenderCache_OperationalFlush' sourab.gupta
2014-04-01 10:51 ` Ville Syrjälä [this message]
2014-04-03 4:42 ` [PATCH v3 " sourab.gupta
2014-04-04 11:17 ` Ville Syrjälä
2014-04-04 11:44 ` [PATCH v4 " sourab.gupta
2014-04-04 15:24 ` Chris Wilson
2014-04-04 15:35 ` Ville Syrjälä
2014-04-04 15:59 ` Chris Wilson
2014-04-04 15:59 ` Daniel Vetter
2014-03-24 17:30 ` [PATCH v2 6/6] drm/i915/vlv: Modifying WA 'WaDisableL3Bank2xClockGate for vlv sourab.gupta
2014-03-24 17:56 ` Damien Lespiau
2014-03-25 6:52 ` Gupta, Sourab
2014-04-01 5:22 ` Gupta, Sourab
2014-04-14 10:22 ` Gupta, Sourab
2014-05-26 10:33 ` Gupta, Sourab
2014-05-27 14:27 ` Damien Lespiau
2014-05-27 16:54 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140401105154.GD21652@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=akash.goel@intel.com \
--cc=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=sourab.gupta@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox