From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Vandana Kannan <vandana.kannan@intel.com>
Cc: "intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>,
"Barnes, Jesse" <jesse.barnes@intel.com>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH v2] drm/edid: Fill PAR in AVI infoframe based on CEA mode list
Date: Tue, 1 Apr 2014 16:54:46 +0300 [thread overview]
Message-ID: <20140401135446.GG21652@intel.com> (raw)
In-Reply-To: <533ABB86.1000700@intel.com>
On Tue, Apr 01, 2014 at 06:43:42PM +0530, Vandana Kannan wrote:
> On Apr-01-2014 5:04 PM, Ville Syrjälä wrote:
> > On Tue, Apr 01, 2014 at 04:26:59PM +0530, Vandana Kannan wrote:
> >> Populate PAR in infoframe structure. If there is a user setting for PAR, then
> >> that value is set. Else, value is taken from CEA mode list if VIC is found.
> >> Else, PAR is calculated from resolution. If none of these conditions are
> >> satisfied, PAR is NONE as per initialization.
> >>
> >> v2: Removed the part which sets PAR according to user input, based on
> >> Daniel's review comments.
> >>
> >> A separate patch will be submitted to create a property that would enable a
> >> user space app to set aspect ratio for AVI infoframe.
> >>
> >> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
> >> Cc: Jesse Barnes <jesse.barnes@intel.com>
> >> Cc: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
> >> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >> Cc: intel-gfx@lists.freedesktop.org
> >> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
> >> ---
> >> drivers/gpu/drm/drm_edid.c | 29 +++++++++++++++++++++++++++++
> >> include/drm/drm_crtc.h | 1 +
> >> 2 files changed, 30 insertions(+)
> >>
> >> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> >> index d4e3f9d..fee24d3 100644
> >> --- a/drivers/gpu/drm/drm_edid.c
> >> +++ b/drivers/gpu/drm/drm_edid.c
> >> @@ -2452,6 +2452,21 @@ u8 drm_match_cea_mode(const struct drm_display_mode *to_match)
> >> }
> >> EXPORT_SYMBOL(drm_match_cea_mode);
> >>
> >> +/**
> >> + * drm_get_cea_aspect_ratio - get the picture aspect ratio corresponding to
> >> + * the input VIC from the CEA mode list
> >> + *
> >> + * Returns picture aspect ratio
> >> + */
> >> +enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code)
> >> +{
> >> + /* return picture aspect ratio for video_code - 1 to access the
> >> + * right array element
> >> + */
> >> + return edid_cea_modes[video_code-1].picture_aspect_ratio;
> >> +}
> >> +EXPORT_SYMBOL(drm_get_cea_aspect_ratio);
> >> +
> >> /*
> >> * Calculate the alternate clock for HDMI modes (those from the HDMI vendor
> >> * specific block).
> >> @@ -3613,6 +3628,20 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
> >> frame->video_code = drm_match_cea_mode(mode);
> >>
> >> frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE;
> >> +
> >> + /* Populate picture aspect ratio from CEA mode list */
> >> + if (frame->video_code > 0)
> >> + frame->picture_aspect = drm_get_cea_aspect_ratio(
> >> + frame->video_code);
> >> + else {
> >> + if (!(mode->vdisplay % 3) &&
> >> + (((mode->vdisplay * 4) / 3) == mode->hdisplay))
> >> + frame->picture_aspect = HDMI_PICTURE_ASPECT_4_3;
> >> + else if (!(mode->vdisplay % 9) &&
> >> + (((mode->vdisplay * 16) / 9) == mode->hdisplay))
> >> + frame->picture_aspect = HDMI_PICTURE_ASPECT_16_9;
> >> + }
> >
> > I'm not sure if providing the PAR for non-CEA modes like this makes
> > any real difference. But I guess it can't hurt since you only provide
> > it for exact matches.
> >
> > But the matches are maybe even a bit too exact. For instance 1366x768
> > will not match the 16:9 case. So maybe it should be calculated in a bit
> > more relaxed way.
> >
> > Or just dropped totally. I'm not sure.
> >
> Maybe we can drop it for now (for this patch) and come up with another
> patch containing calculations which are more relaxed than the above.
> What do you think?
That's fine by me.
> >> +
> >> frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
> >> frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
> >>
> >> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> >> index 27f828c..50dc55a 100644
> >> --- a/include/drm/drm_crtc.h
> >> +++ b/include/drm/drm_crtc.h
> >> @@ -983,6 +983,7 @@ extern int drm_mode_gamma_get_ioctl(struct drm_device *dev,
> >> extern int drm_mode_gamma_set_ioctl(struct drm_device *dev,
> >> void *data, struct drm_file *file_priv);
> >> extern u8 drm_match_cea_mode(const struct drm_display_mode *to_match);
> >> +extern enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code);
> >> extern bool drm_detect_hdmi_monitor(struct edid *edid);
> >> extern bool drm_detect_monitor_audio(struct edid *edid);
> >> extern bool drm_rgb_quant_range_selectable(struct edid *edid);
> >> --
> >> 1.9.1
> >
--
Ville Syrjälä
Intel OTC
next prev parent reply other threads:[~2014-04-01 13:54 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-21 3:01 [PATCH] drm/edid: Fill PAR in AVI infoframe based on CEA mode list Vandana Kannan
2014-03-31 18:55 ` Jesse Barnes
2014-03-31 19:05 ` Daniel Vetter
2014-04-01 2:36 ` Vandana Kannan
2014-04-01 7:27 ` Daniel Vetter
2014-04-01 9:26 ` Vandana Kannan
2014-04-01 9:51 ` Daniel Vetter
2014-04-01 10:56 ` [PATCH v2] " Vandana Kannan
2014-04-01 11:34 ` Ville Syrjälä
2014-04-01 13:13 ` Vandana Kannan
2014-04-01 13:54 ` Ville Syrjälä [this message]
2014-04-01 14:22 ` [PATCH v3] " Vandana Kannan
2014-04-01 15:37 ` [PATCH v4] " Vandana Kannan
2014-04-01 17:40 ` Daniel Vetter
2014-04-01 17:04 ` [Intel-gfx] [PATCH v3] " Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140401135446.GG21652@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jesse.barnes@intel.com \
--cc=vandana.kannan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox