From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH 4/4] drm/i915: move infoframe setting to after port enable
Date: Thu, 3 Apr 2014 14:00:53 -0700 [thread overview]
Message-ID: <20140403140053.3bd84fa2@jbarnes-desktop> (raw)
In-Reply-To: <CAKMK7uF2zKgpgMicTbPM=6ZVKzx1rujz9DL65_LvZMtUx9uO9w@mail.gmail.com>
On Thu, 3 Apr 2014 22:55:24 +0200
Daniel Vetter <daniel@ffwll.ch> wrote:
> On Thu, Apr 3, 2014 at 6:49 PM, Jesse Barnes <jbarnes@virtuousgeek.org> wrote:
> >> > static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
> >> > @@ -738,9 +736,13 @@ static void intel_enable_hdmi(struct intel_encoder *encoder)
> >> > struct drm_i915_private *dev_priv = dev->dev_private;
> >> > struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> >> > struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
> >> > + struct drm_display_mode *adjusted_mode =
> >> > + &intel_crtc->config.adjusted_mode;
> >> > u32 temp;
> >> > u32 enable_bits = SDVO_ENABLE;
> >> >
> >> > + intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
> >> > +
> >> > if (intel_hdmi->has_audio)
> >> > enable_bits |= SDVO_AUDIO_ENABLE;
> >>
> >> That kind of change tends to freak out Paulo, our master of infoframes. Do
> >> doecs really state that this is how stuff should work in general, or is
> >> this just a gm45/vlv thing? Or vlv only?
> >>
> >> /me remembers how often we've burnt our hands here
> >
> > Hey infoframe emission was totally broken for awhile due to a generic
> > change, and we didn't notice that right away. :)
> >
> > But yeah I'd prefer to test this on multiple platforms first, but don't
> > have that capability. It does pass on BYT though, and the logic should
> > be similar to IBX, so this change ought to be safe. It's easy to
> > revert too and make platform specific if we get regression reports, but
> > I expect it to fix weird issues instead of introducing new ones, based
> > on the infoframe analyzer results we have from BYT.
>
> Yeah I guess the number of users who actual use a gm45 or so with a TV
> is probably still bigger than all the byt platforms out there :( If
> Paulo can ack this I'll happily merge. Paulo, can you please take a
> quick look?
>
> Also you make this sound like it's a regression, but the patch is
> missing cc:stable and a sha1 citation of the offending commit. Jesse,
> can you please fix this?
No it's not a regression, we had an earlier regression on infoframes
though that seemed to have gone unnoticed for awhile when looking at
the logs and testing here... It's fixed now though.
--
Jesse Barnes, Intel Open Source Technology Center
next prev parent reply other threads:[~2014-04-03 20:59 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-02 17:08 [PATCH 1/4] drm/i915/vlv: write the port field in the per-pipe DIP control reg Jesse Barnes
2014-04-02 17:08 ` [PATCH 2/4] drm/i915/vlv: disable AVI infoframe emission when writing infoframes Jesse Barnes
2014-04-03 10:33 ` Ville Syrjälä
2014-04-02 17:08 ` [PATCH 3/4] drm/i915: enable HDMI mode on VLV when an HDMI sink is detected Jesse Barnes
2014-04-03 10:30 ` Ville Syrjälä
2014-04-02 17:08 ` [PATCH 4/4] drm/i915: move infoframe setting to after port enable Jesse Barnes
2014-04-03 7:41 ` Jani Nikula
2014-04-03 10:31 ` Ville Syrjälä
2014-04-03 15:19 ` Daniel Vetter
2014-04-03 16:49 ` Jesse Barnes
2014-04-03 20:55 ` Daniel Vetter
2014-04-03 21:00 ` Jesse Barnes [this message]
2014-04-04 21:11 ` Paulo Zanoni
2014-04-05 15:18 ` Daniel Vetter
2014-04-04 21:38 ` [PATCH] drm/i915: move infoframe setting to after pll enable v2 Jesse Barnes
2014-04-04 21:59 ` Paulo Zanoni
2014-04-04 22:12 ` Jesse Barnes
2014-04-05 15:21 ` Daniel Vetter
2014-04-05 18:51 ` Jesse Barnes
2014-04-05 18:51 ` [PATCH] drm/i915: move infoframe setting to after pll enable v3 Jesse Barnes
2014-04-07 12:54 ` Paulo Zanoni
2014-04-09 12:48 ` Daniel Vetter
2014-04-02 17:10 ` [PATCH 1/4] drm/i915/vlv: write the port field in the per-pipe DIP control reg Jesse Barnes
2014-04-04 19:25 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140403140053.3bd84fa2@jbarnes-desktop \
--to=jbarnes@virtuousgeek.org \
--cc=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox