Re: [PATCH 2/3] drm/i915: correct BLC vs PWM enable/disable ordering

[Daniel Vetter <daniel@ffwll.ch>]

On Thu, Jun 19, 2014 at 11:00:20AM -0700, Jesse Barnes wrote:
> Jani, can you review this one?  It's still needed for us to conform to
> the eDP timing spec.

Jani's already goofing off on vacation and I couldn't spot his r-b. Merged
anyway, I guess people will scream fast enough if this breaks stuff ;-)
-Daniel

> 
> Thanks,
> Jesse
> 
> On Mon, 31 Mar 2014 11:13:56 -0700
> Jesse Barnes <jbarnes@virtuousgeek.org> wrote:
> 
> > With the new checks in place, we can see we're doing things backwards,
> > so fix them up per the spec.
> > 
> > Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
> > ---
> >  drivers/gpu/drm/i915/intel_dp.c | 13 +++++++------
> >  1 file changed, 7 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index b6f7087..d540fbe 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -1273,8 +1273,6 @@ void intel_edp_panel_off(struct intel_dp *intel_dp)
> >  
> >  	DRM_DEBUG_KMS("Turn eDP power off\n");
> >  
> > -	edp_wait_backlight_off(intel_dp);
> > -
> >  	WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n");
> >  
> >  	/* By this time the PWM and BLC bits should be off already */
> > @@ -1316,6 +1314,9 @@ void intel_edp_backlight_on(struct intel_dp *intel_dp)
> >  		return;
> >  
> >  	DRM_DEBUG_KMS("\n");
> > +
> > +	intel_panel_enable_backlight(intel_dp->attached_connector);
> > +
> >  	/*
> >  	 * If we enable the backlight right away following a panel power
> >  	 * on, we may see slight flicker as the panel syncs with the eDP
> > @@ -1333,8 +1334,6 @@ void intel_edp_backlight_on(struct intel_dp *intel_dp)
> >  
> >  	I915_WRITE(pp_ctrl_reg, pp);
> >  	POSTING_READ(pp_ctrl_reg);
> > -
> > -	intel_panel_enable_backlight(intel_dp->attached_connector);
> >  }
> >  
> >  void intel_edp_backlight_off(struct intel_dp *intel_dp)
> > @@ -1350,8 +1349,6 @@ void intel_edp_backlight_off(struct intel_dp *intel_dp)
> >  	/* PWM must still be enabled here */
> >  	assert_pwm_enabled(intel_dp->attached_connector);
> >  
> > -	intel_panel_disable_backlight(intel_dp->attached_connector);
> > -
> >  	DRM_DEBUG_KMS("\n");
> >  	pp = ironlake_get_pp_control(intel_dp);
> >  	pp &= ~EDP_BLC_ENABLE;
> > @@ -1361,6 +1358,10 @@ void intel_edp_backlight_off(struct intel_dp *intel_dp)
> >  	I915_WRITE(pp_ctrl_reg, pp);
> >  	POSTING_READ(pp_ctrl_reg);
> >  	intel_dp->last_backlight_off = jiffies;
> > +
> > +	edp_wait_backlight_off(intel_dp);
> > +
> > +	intel_panel_disable_backlight(intel_dp->attached_connector);
> >  }
> >  
> >  static void ironlake_edp_pll_on(struct intel_dp *intel_dp)
> 
> 
> -- 
> Jesse Barnes, Intel Open Source Technology Center
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch