Re: [PATCH 00/14] drm/i915: edp vdd locking and prep for power sequencer kick

[Daniel Vetter <daniel@ffwll.ch>]

On Tue, Aug 19, 2014 at 10:45:20AM +0300, Jani Nikula wrote:
> On Mon, 18 Aug 2014, ville.syrjala@linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > While wrestling with the VLV/CHV panel power sequencer I noticed the locking
> > in our edp vdd code was rather broken. This series aims to fix that by
> > introducing a power seqeuencer mutex. I was already thinking about using the
> > aux.hw_mutex for this since it's already locked around the aux ->transfer()
> > function, but the VLV/CHV multiple power sequencer issue requires a single
> > lock instead of per-port.
> >
> > At the end of the series there's a bit of reordering of the DP port
> > enable/disable sequences to make subsequent power sequencer kick patches
> > easier. The last patch fixes the wait_pipe_off() timeouts on my ILK.
> > Strictly speaking it shouldn't be part of this series, but I couldn't
> > really test this on my ILK without suffering tons of warnings so I
> > included it here anyway.
> 
> This is what I'd like to happen here:
> 
> 1) Patches [1] from me and [2] from Clinton get reviewed and merged
> first, through -fixes.
> 
> 2) The rest of the patches in my series after [1] get reviewed and
> merged, through dinq.
> 
> 3) The first part of this series, up to the locking bits, mostly
> reviewed now, get refreshed on top the above, should not conflict much,
> and we can start merging them while...

I've just merged them all to dinq. I guess you could simply cherry-pick
the -fixes material to, that's imo saner than backmerges here. I think.
-Daniel

> 
> 4) The second part of this series, from about the locking on, get
> reviewed and merged.
> 
> I want this order to make backporting steps 1 and 2 as painless as
> possible. Please help review them, and I'll follow through with this
> series.
> 
> BR,
> Jani.
> 
> 
> 
> [1] http://mid.gmane.org/e7a47b50ed0f25cafdc26711fc09561ea8af3b81.1407849872.git.jani.nikula@intel.com
> [2] http://mid.gmane.org/1408394915-21882-1-git-send-email-clinton.a.taylor@intel.com
> 
> 
> 
> >
> > Ville Syrjälä (14):
> >   drm/i915: Parametrize PANEL_PORT_SELECT_VLV
> >   drm/i915: Reorganize vlv eDP reboot notifier
> >   drm/i915: Use intel_edp_panel_vdd_on() in intel_dp_probe_mst()
> >   drm/i915: Rename edp vdd funcs for consistency
> >   drm/i915: Add a note explaining vdd on/off handling in
> >     intel_dp_aux_ch()
> >   drm/i915: Replace big nested if block with early return
> >   drm/i915: Warn about want_panel_vdd in edp_panel_vdd_off_sync()
> >   drm/i915: Flatten intel_edp_panel_vdd_on()
> >   drm/i915: Fix edp vdd locking
> >   drm/i915: Track which port is using which pipe's power sequencer
> >   drm/i915: Be more careful when picking the initial power sequencer
> >     pipe
> >   drm/i915: Turn on panel power before doing aux transfers
> >   drm/i915: Enable DP port earlier
> >   drm/i915: Move DP port disable to post_disable for pch platforms
> >
> >  drivers/gpu/drm/i915/i915_drv.h      |   3 +
> >  drivers/gpu/drm/i915/i915_reg.h      |   3 +-
> >  drivers/gpu/drm/i915/intel_display.c |   2 +
> >  drivers/gpu/drm/i915/intel_dp.c      | 619 +++++++++++++++++++++++++----------
> >  drivers/gpu/drm/i915/intel_drv.h     |   6 +
> >  5 files changed, 463 insertions(+), 170 deletions(-)
> >
> > -- 
> > 1.8.5.5
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Jani Nikula, Intel Open Source Technology Center
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch