From: Daniel Vetter <daniel@ffwll.ch>
To: Imre Deak <imre.deak@intel.com>
Cc: alsa-devel@alsa-project.org, Takashi Iwai <tiwai@suse.de>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
intel-gfx@lists.freedesktop.org,
Jani Nikula <jani.nikula@intel.com>
Subject: Re: [PATCH v2 2/5] drm/i915: add component support
Date: Tue, 9 Dec 2014 11:12:28 +0100 [thread overview]
Message-ID: <20141209101228.GS27182@phenom.ffwll.local> (raw)
In-Reply-To: <1418118078-3676-2-git-send-email-imre.deak@intel.com>
On Tue, Dec 09, 2014 at 11:41:17AM +0200, Imre Deak wrote:
> Register a component to be used to interface with the snd_hda_intel
> driver. This is meant to replace the same interface that is currently
> based on module symbol lookup.
>
> v2:
> - change roles between the hda and i915 components (Daniel)
> - add the implementation to a new file (Jani)
I disagree with the name here - intel_component.c is not really
descriptive since it's not really. Imo it makes much more sense to put
this into intel_audio.c. After all it's all about how we interact with the
audio side, which will be even more obvious once we have a dedicated
subdevice for this.
Also please add a bit of kerneldoc to the _init/_cleanup functions with a
few words about what this is used for. Or if you want, extract a short
DOC: section for it even to describe the interactions.
-Daniel
> - use better namespacing (Jani)
>
> Signed-off-by: Imre Deak <imre.deak@intel.com>
> ---
> drivers/gpu/drm/i915/Makefile | 3 +-
> drivers/gpu/drm/i915/i915_component.c | 109 ++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/i915_dma.c | 4 ++
> drivers/gpu/drm/i915/i915_drv.h | 3 +
> drivers/gpu/drm/i915/intel_drv.h | 4 ++
> include/drm/i915_component.h | 38 ++++++++++++
> 6 files changed, 160 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/i915/i915_component.c
> create mode 100644 include/drm/i915_component.h
>
> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> index e4083e4..6b5b082 100644
> --- a/drivers/gpu/drm/i915/Makefile
> +++ b/drivers/gpu/drm/i915/Makefile
> @@ -7,7 +7,8 @@ ccflags-y := -Iinclude/drm
> # Please keep these build lists sorted!
>
> # core driver code
> -i915-y := i915_drv.o \
> +i915-y := i915_component.o \
> + i915_drv.o \
> i915_params.o \
> i915_suspend.o \
> i915_sysfs.o \
> diff --git a/drivers/gpu/drm/i915/i915_component.c b/drivers/gpu/drm/i915/i915_component.c
> new file mode 100644
> index 0000000..4bb49f0
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/i915_component.c
> @@ -0,0 +1,109 @@
> +/*
> + * Copyright © 2014 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + */
> +
> +#include <linux/component.h>
> +#include <drm/i915_component.h>
> +#include "intel_drv.h"
> +
> +static void display_component_get_power(struct device *dev)
> +{
> + intel_display_power_get(dev_to_i915(dev), POWER_DOMAIN_AUDIO);
> +}
> +
> +static void display_component_put_power(struct device *dev)
> +{
> + intel_display_power_put(dev_to_i915(dev), POWER_DOMAIN_AUDIO);
> +}
> +
> +/* Get CDCLK in kHz */
> +static int display_component_get_cdclk_freq(struct device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev_to_i915(dev);
> + int ret;
> +
> + if (WARN_ON_ONCE(!HAS_DDI(dev_priv)))
> + return -ENODEV;
> +
> + intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO);
> + ret = intel_ddi_get_cdclk_freq(dev_priv);
> + intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO);
> +
> + return ret;
> +}
> +
> +static const struct i915_display_component_ops display_component_ops = {
> + .owner = THIS_MODULE,
> + .get_power = display_component_get_power,
> + .put_power = display_component_put_power,
> + .get_cdclk_freq = display_component_get_cdclk_freq,
> +};
> +
> +static int display_component_bind(struct device *i915_dev,
> + struct device *hda_dev, void *data)
> +{
> + struct i915_display_component *dcomp = data;
> +
> + if (WARN_ON(dcomp->ops || dcomp->dev))
> + return -EEXIST;
> +
> + dcomp->ops = &display_component_ops;
> + dcomp->dev = i915_dev;
> +
> + return 0;
> +}
> +
> +static void display_component_unbind(struct device *i915_dev,
> + struct device *hda_dev, void *data)
> +{
> + struct i915_display_component *dcomp = data;
> +
> + dcomp->ops = NULL;
> + dcomp->dev = NULL;
> +}
> +
> +static const struct component_ops display_component_bind_ops = {
> + .bind = display_component_bind,
> + .unbind = display_component_unbind,
> +};
> +
> +void i915_component_init(struct drm_i915_private *dev_priv)
> +{
> + int ret;
> +
> + ret = component_add(dev_priv->dev->dev, &display_component_bind_ops);
> + if (ret < 0) {
> + DRM_ERROR("failed to add display component (%d)\n", ret);
> + /* continue with reduced functionality */
> + return;
> + }
> +
> + dev_priv->display_component_registered = true;
> +}
> +
> +void i915_component_cleanup(struct drm_i915_private *dev_priv)
> +{
> + if (dev_priv->display_component_registered) {
> + component_del(dev_priv->dev->dev, &display_component_bind_ops);
> + dev_priv->display_component_registered = false;
> + }
> +}
> diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
> index 887d88f..b6238bb 100644
> --- a/drivers/gpu/drm/i915/i915_dma.c
> +++ b/drivers/gpu/drm/i915/i915_dma.c
> @@ -830,6 +830,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
>
> intel_runtime_pm_enable(dev_priv);
>
> + i915_component_init(dev_priv);
> +
> return 0;
>
> out_power_well:
> @@ -870,6 +872,8 @@ int i915_driver_unload(struct drm_device *dev)
> struct drm_i915_private *dev_priv = dev->dev_private;
> int ret;
>
> + i915_component_cleanup(dev_priv);
> +
> ret = i915_gem_suspend(dev);
> if (ret) {
> DRM_ERROR("failed to idle hardware: %d\n", ret);
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index fb2616d..3b7ae14 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1684,6 +1684,9 @@ struct drm_i915_private {
>
> bool mchbar_need_disable;
>
> + /* hda/i915 display component */
> + bool display_component_registered;
> +
> struct intel_l3_parity l3_parity;
>
> /* Cannot be determined by PCIID. You must always read a register. */
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 61a88fa..856709e 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -809,6 +809,10 @@ static inline bool intel_irqs_enabled(struct drm_i915_private *dev_priv)
> int intel_get_crtc_scanline(struct intel_crtc *crtc);
> void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv);
>
> +/* i915_component.c */
> +void i915_component_init(struct drm_i915_private *dev_priv);
> +void i915_component_cleanup(struct drm_i915_private *dev_priv);
> +
> /* intel_crt.c */
> void intel_crt_init(struct drm_device *dev);
>
> diff --git a/include/drm/i915_component.h b/include/drm/i915_component.h
> new file mode 100644
> index 0000000..9c660ca
> --- /dev/null
> +++ b/include/drm/i915_component.h
> @@ -0,0 +1,38 @@
> +/*
> + * Copyright © 2014 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + */
> +
> +#ifndef _I915_COMPONENT_H_
> +#define _I915_COMPONENT_H_
> +
> +struct i915_display_component {
> + struct device *dev;
> +
> + const struct i915_display_component_ops {
> + struct module *owner;
> + void (*get_power)(struct device *);
> + void (*put_power)(struct device *);
> + int (*get_cdclk_freq)(struct device *);
> + } *ops;
> +};
> +
> +#endif /* _I915_COMPONENT_H_ */
> --
> 1.8.4
>
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2014-12-09 10:11 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-08 16:42 [PATCH 0/5] sanitize hda/i915 interface using the component fw Imre Deak
2014-12-08 16:42 ` [PATCH 1/5] drm/i915: add dev_to_i915_priv helper Imre Deak
2014-12-08 18:36 ` Jani Nikula
2014-12-08 19:54 ` Imre Deak
2014-12-08 20:27 ` Daniel Vetter
2014-12-08 20:40 ` Chris Wilson
2014-12-08 21:26 ` Imre Deak
2014-12-09 9:41 ` [PATCH v2 1/5] drm/i915: add dev_to_i915 helper Imre Deak
2014-12-09 10:08 ` Daniel Vetter
2014-12-09 16:15 ` [PATCH v3 " Imre Deak
2014-12-08 16:42 ` [PATCH 2/5] drm/i915: add component support Imre Deak
2014-12-08 18:44 ` Jani Nikula
2014-12-08 20:23 ` Imre Deak
2014-12-09 9:41 ` [PATCH v2 " Imre Deak
2014-12-09 10:12 ` Daniel Vetter [this message]
2014-12-09 10:33 ` Jani Nikula
2014-12-10 9:24 ` Daniel Vetter
2014-12-09 16:15 ` [PATCH v3 " Imre Deak
2014-12-10 8:22 ` Jani Nikula
2014-12-10 13:18 ` Imre Deak
2014-12-08 16:42 ` [PATCH 3/5] ALSA: hda: pass chip to all i915 interface functions Imre Deak
2014-12-08 16:42 ` [PATCH 4/5] ALSA: hda: add component support Imre Deak
2014-12-09 9:41 ` [PATCH v2 " Imre Deak
2014-12-09 10:19 ` Daniel Vetter
2014-12-09 17:30 ` Takashi Iwai
2014-12-10 9:27 ` Daniel Vetter
2014-12-09 16:15 ` [PATCH v3 " Imre Deak
2014-12-08 16:42 ` [PATCH 5/5] drm/i915: remove unused power_well/get_cdclk_freq api Imre Deak
2014-12-08 18:46 ` Jani Nikula
2014-12-09 21:04 ` shuang.he
2014-12-08 20:14 ` [PATCH 0/5] sanitize hda/i915 interface using the component fw Daniel Vetter
2014-12-09 8:59 ` Imre Deak
2014-12-09 10:03 ` Daniel Vetter
2014-12-09 16:56 ` Imre Deak
2014-12-09 17:33 ` Takashi Iwai
2015-01-05 15:29 ` Imre Deak
2015-01-05 15:35 ` Takashi Iwai
2015-01-05 17:25 ` Imre Deak
2015-01-06 10:25 ` Takashi Iwai
2015-01-07 19:49 ` Imre Deak
2015-01-08 14:35 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141209101228.GS27182@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=alsa-devel@alsa-project.org \
--cc=daniel.vetter@ffwll.ch \
--cc=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox