Re: [PATCH v2 6/7] drm/i915/skl: Updated the 'i915_frequency_info' debugs function

From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: akash.goel@intel.com
Cc: ankitprasad.r.sharma@intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 6/7] drm/i915/skl: Updated the 'i915_frequency_info' debugs function
Date: Tue, 24 Feb 2015 18:16:45 +0200	[thread overview]
Message-ID: <20150224161645.GP11371@intel.com> (raw)
In-Reply-To: <1424268078-14541-8-git-send-email-akash.goel@intel.com>

On Wed, Feb 18, 2015 at 07:31:18PM +0530, akash.goel@intel.com wrote:
> From: Akash Goel <akash.goel@intel.com>
> 
> Added support for SKL in the 'i915_frequency_info' debugfs function
> 
> v2: Added missing conversion to 50MHZ for reqf & cagf (Damien)
> 
> Signed-off-by: Akash Goel <akash.goel@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c | 25 +++++++++++++++++--------
>  1 file changed, 17 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 9af17fb..5fb0121 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -1089,7 +1089,7 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
>  		seq_printf(m, "Current P-state: %d\n",
>  			   (rgvstat & MEMSTAT_PSTATE_MASK) >> MEMSTAT_PSTATE_SHIFT);
>  	} else if (IS_GEN6(dev) || (IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) ||
> -		   IS_BROADWELL(dev)) {
> +		   IS_BROADWELL(dev) || IS_GEN9(dev)) {
>  		u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
>  		u32 rp_state_limits = I915_READ(GEN6_RP_STATE_LIMITS);
>  		u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
> @@ -1108,11 +1108,17 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
>  		intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
>  
>  		reqf = I915_READ(GEN6_RPNSWREQ);
> -		reqf &= ~GEN6_TURBO_DISABLE;
> -		if (IS_HASWELL(dev) || IS_BROADWELL(dev))
> -			reqf >>= 24;
> -		else
> -			reqf >>= 25;
> +		if (IS_GEN9(dev)) {
> +			reqf >>= 23;
> +			/* Convert to 50 MHZ units from 16.667 MHZ */
> +			reqf /= GEN9_FREQ_SCALER;

Oh, and all this GEN9_FREQ_SCALER mul/div stuff should be killed and
instead you should just make intel_gpu_freq() and intel_freq_opcode()
handle the conversion properly.

> +		} else {
> +			reqf &= ~GEN6_TURBO_DISABLE;
> +			if (IS_HASWELL(dev) || IS_BROADWELL(dev))
> +				reqf >>= 24;
> +			else
> +				reqf >>= 25;
> +		}
>  		reqf = intel_gpu_freq(dev_priv, reqf);
>  
>  		rpmodectl = I915_READ(GEN6_RP_CONTROL);
> @@ -1128,7 +1134,10 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
>  		rpprevdown = I915_READ(GEN6_RP_PREV_DOWN);
>  		if (IS_HASWELL(dev) || IS_BROADWELL(dev))
>  			cagf = (rpstat & HSW_CAGF_MASK) >> HSW_CAGF_SHIFT;
> -		else
> +		else if (IS_GEN9(dev)) {
> +			cagf = (rpstat & GEN9_CAGF_MASK) >> GEN9_CAGF_SHIFT;
> +			cagf /= GEN9_FREQ_SCALER;
> +		} else
>  			cagf = (rpstat & GEN6_CAGF_MASK) >> GEN6_CAGF_SHIFT;
>  		cagf = intel_gpu_freq(dev_priv, cagf);
>  
> @@ -1152,7 +1161,7 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
>  			   pm_ier, pm_imr, pm_isr, pm_iir, pm_mask);
>  		seq_printf(m, "GT_PERF_STATUS: 0x%08x\n", gt_perf_status);
>  		seq_printf(m, "Render p-state ratio: %d\n",
> -			   (gt_perf_status & 0xff00) >> 8);
> +			   (gt_perf_status & (IS_GEN9(dev) ? 0x1ff00 : 0xff00)) >> 8);
>  		seq_printf(m, "Render p-state VID: %d\n",
>  			   gt_perf_status & 0xff);
>  		seq_printf(m, "Render p-state limit: %d\n",
> -- 
> 1.9.2
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx