public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: Thomas Richter <thor@math.tu-berlin.de>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH] Enable dithering on intel VCH DVO chips on 18bpp panels
Date: Mon, 30 Mar 2015 11:37:56 +0200	[thread overview]
Message-ID: <20150330093756.GI23521@phenom.ffwll.local> (raw)
In-Reply-To: <55167D4D.5030700@math.tu-berlin.de>

On Sat, Mar 28, 2015 at 11:07:09AM +0100, Thomas Richter wrote:
> Hi folks,
> 
> this is a patch against drm-intel-nightly that enables an apparently
> undocumented feature of the intel VCH DVO chips. Bit 4 of the VR01 register
> controls an automatic dithering for 18bpp outputs which greatly improves the
> visual image quality for 24bpp display buffers.
> 
> The bios of my IBM R31 automatically enables this feature, it is disabled
> again by the ivchr driver. The following patch checks whether the display is
> connected with a 18bpp connection and if so, re-enables dithering.
> 
> This feature has been tested to work fine on 16bpp images and with the
> scaler on and off. There are no ill side effects.
> 
> Please let me know whether this patch is acceptable.
> 
> Thanks and greetings,
> 
> 	Thomas
> 
> 
> Signed-off-by: Thomas Richter <thor@math.tu-berlin.de>

Patch looks good but seems mangled. Can you please resend using git
send-email? That tool takes care of all the details. Also if you want to
add a few things which should not be part of the commit message you can
put them below the the s-o-b line like this:

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
---
<Further explanations and context goes here>

Cheers, Daniel

git apply-mbox will the automatically cut away everything below the ---
line and only take the text above it as the commit message.

Thanks, Daniel
> ---
>  drivers/gpu/drm/i915/dvo_ivch.c |   21 ++++++++++++++++++---
>  1 file changed, 18 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/dvo_ivch.c
> b/drivers/gpu/drm/i915/dvo_ivch.c
> index 0f2587f..89b08a8 100644
> --- a/drivers/gpu/drm/i915/dvo_ivch.c
> +++ b/drivers/gpu/drm/i915/dvo_ivch.c
> @@ -23,6 +23,9 @@
>   * Authors:
>   *    Eric Anholt <eric@anholt.net>
>   *
> + * Minor modifications (Dithering enable):
> + *    Thomas Richter <thor@math.tu-berlin.de>
> + *
>   */
> 
>  #include "dvo.h"
> @@ -59,6 +62,8 @@
>  # define VR01_DVO_BYPASS_ENABLE                (1 << 1)
>  /** Enables the DVO clock */
>  # define VR01_DVO_ENABLE               (1 << 0)
> +/** Enable dithering for 18bpp panels. Not documented. */
> +# define VR01_DITHER_ENABLE             (1 << 4)
> 
>  /*
>   * LCD Interface Format
> @@ -74,6 +79,8 @@
>  # define VR10_INTERFACE_2X18           (2 << 2)
>  /** Enables 2x24-bit LVDS output */
>  # define VR10_INTERFACE_2X24           (3 << 2)
> +/** Mask that defines the depth of the pipeline */
> +# define VR10_INTERFACE_DEPTH_MASK      (3 << 2)
> 
>  /*
>   * VR20 LCD Horizontal Display Size
> @@ -342,9 +349,15 @@ static void ivch_mode_set(struct intel_dvo_device *dvo,
>                           struct drm_display_mode *adjusted_mode)
>  {
>         uint16_t vr40 = 0;
> -       uint16_t vr01;
> +       uint16_t vr01 = 0;
> +       uint16_t vr10;
> +
> +       ivch_read(dvo, VR10, &vr10);
> +       /* Enable dithering for 18 bpp pipelines */
> +       vr10 &= VR10_INTERFACE_DEPTH_MASK;
> +       if (vr10 == VR10_INTERFACE_2X18 || vr10 == VR10_INTERFACE_1X18)
> +               vr01 = VR01_DITHER_ENABLE;
> 
> -       vr01 = 0;
>         vr40 = (VR40_STALL_ENABLE | VR40_VERTICAL_INTERP_ENABLE |
>                 VR40_HORIZONTAL_INTERP_ENABLE);
> 
> @@ -353,7 +366,7 @@ static void ivch_mode_set(struct intel_dvo_device *dvo,
>                 uint16_t x_ratio, y_ratio;
> 
>                 vr01 |= VR01_PANEL_FIT_ENABLE;
> -               vr40 |= VR40_CLOCK_GATING_ENABLE;
> +               vr40 |= VR40_CLOCK_GATING_ENABLE |
> VR40_ENHANCED_PANEL_FITTING;
>                 x_ratio = (((mode->hdisplay - 1) << 16) /
>                            (adjusted_mode->hdisplay - 1)) >> 2;
>                 y_ratio = (((mode->vdisplay - 1) << 16) /
> @@ -380,6 +393,8 @@ static void ivch_dump_regs(struct intel_dvo_device *dvo)
>         DRM_DEBUG_KMS("VR00: 0x%04x\n", val);
>         ivch_read(dvo, VR01, &val);
>         DRM_DEBUG_KMS("VR01: 0x%04x\n", val);
> +       ivch_read(dvo, VR10, &val);
> +       DRM_DEBUG_KMS("VR10: 0x%04x\n", val);
>         ivch_read(dvo, VR30, &val);
>         DRM_DEBUG_KMS("VR30: 0x%04x\n", val);
>         ivch_read(dvo, VR40, &val);
> --
> 1.7.10.4

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-03-30  9:36 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-28 10:07 [PATCH] Enable dithering on intel VCH DVO chips on 18bpp panels Thomas Richter
2015-03-30  9:37 ` Daniel Vetter [this message]
2015-03-30  9:45 ` Ville Syrjälä

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150330093756.GI23521@phenom.ffwll.local \
    --to=daniel@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=thor@math.tu-berlin.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox