public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org, "Syrjala,
	Ville" <ville.syrjala@intel.com>
Subject: Re: [PATCH] drm/i915: Remove wait for for punit to updates	freq.
Date: Mon, 13 Apr 2015 15:10:18 +0300	[thread overview]
Message-ID: <20150413121018.GF11009@intel.com> (raw)
In-Reply-To: <87wq1gp7j3.fsf@intel.com>

On Mon, Apr 13, 2015 at 02:55:12PM +0300, Jani Nikula wrote:
> On Thu, 05 Mar 2015, deepak.s@linux.intel.com wrote:
> > From: Deepak S <deepak.s@linux.intel.com>
> >
> > When GPU is idle on VLV, Request freq to punit should be good enough to
> > get the voltage back to VNN. Also, make sure gfx clock force applies
> > before requesting the freq fot vlv.
> >
> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75244
> > suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
> > Signed-off-by: Deepak S <deepak.s@linux.intel.com>
> 
> Deepak, these patches seem to have fallen through the cracks. Are they
> still valid? Please rebase and repost if they are.
> 
> Ville, your opinion also appreciated.

I don't I have any VLVs old enough to hit this, so can't really confirm
one way or the other.

> 
> BR,
> Jani.
> 
> 
> 
> > ---
> >  drivers/gpu/drm/i915/intel_pm.c | 20 ++++----------------
> >  1 file changed, 4 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> > index e710b43..2e1ed07 100644
> > --- a/drivers/gpu/drm/i915/intel_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > @@ -3894,7 +3894,7 @@ static void valleyview_set_rps(struct drm_device *dev, u8 val)
> >   * * If Gfx is Idle, then
> >   * 1. Mask Turbo interrupts
> >   * 2. Bring up Gfx clock
> > - * 3. Change the freq to Rpn and wait till P-Unit updates freq
> > + * 3. Request the freq to Rpn.
> >   * 4. Clear the Force GFX CLK ON bit so that Gfx can down
> >   * 5. Unmask Turbo interrupts
> >  */
> > @@ -3902,8 +3902,8 @@ static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
> >  {
> >  	struct drm_device *dev = dev_priv->dev;
> >  
> > -	/* CHV and latest VLV don't need to force the gfx clock */
> > -	if (IS_CHERRYVIEW(dev) || dev->pdev->revision >= 0xd) {
> > +	/* CHV don't need to force the gfx clock */
> > +	if (IS_CHERRYVIEW(dev)) {

Why was the stepping check removed?

> >  		valleyview_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit);
> >  		return;
> >  	}
> > @@ -3920,20 +3920,8 @@ static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
> >  		   gen6_sanitize_rps_pm_mask(dev_priv, ~0));
> >  
> >  	vlv_force_gfx_clock(dev_priv, true);
> > -
> > -	dev_priv->rps.cur_freq = dev_priv->rps.min_freq_softlimit;
> > -
> > -	vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ,
> > -					dev_priv->rps.min_freq_softlimit);
> > -
> > -	if (wait_for(((vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS))
> > -				& GENFREQSTATUS) == 0, 100))
> > -		DRM_ERROR("timed out waiting for Punit\n");
> > -
> > +	valleyview_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit);
> >  	vlv_force_gfx_clock(dev_priv, false);
> > -
> > -	I915_WRITE(GEN6_PMINTRMSK,
> > -		   gen6_rps_pm_mask(dev_priv, dev_priv->rps.cur_freq));
> >  }
> >  
> >  void gen6_rps_idle(struct drm_i915_private *dev_priv)
> > -- 
> > 1.9.1
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Jani Nikula, Intel Open Source Technology Center
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-04-13 12:10 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-05  4:08 [PATCH] drm/i915: Remove wait for for punit to updates freq deepak.s
2015-03-05  4:08 ` [PATCH] drm/i915: Update PM interrupts before updating the freq deepak.s
2015-03-05 10:30   ` shuang.he
2015-03-05  7:46 ` [PATCH] drm/i915: Remove wait for for punit to updates freq shuang.he
2015-04-13 11:55 ` Jani Nikula
2015-04-13 12:10   ` Ville Syrjälä [this message]
2015-04-28 10:43     ` Deepak S
2015-04-28 18:16 ` Jesse Barnes
2015-04-28 18:32   ` Ville Syrjälä
2015-04-29  2:50     ` Deepak S
2015-04-29 10:26       ` Ville Syrjälä
2015-04-30 10:04         ` Deepak S
2015-05-04  7:59           ` Daniel Vetter
2015-04-29  2:37   ` Deepak S

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150413121018.GF11009@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=ville.syrjala@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox