From: Daniel Vetter <daniel@ffwll.ch>
To: Todd Previte <tprevite@gmail.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 01/10] drm/i915: Add automated testing support for Displayport compliance testing
Date: Thu, 16 Apr 2015 13:32:03 +0200 [thread overview]
Message-ID: <20150416113203.GC5082@phenom.ffwll.local> (raw)
In-Reply-To: <1429112327-7695-2-git-send-email-tprevite@gmail.com>
On Wed, Apr 15, 2015 at 08:38:38AM -0700, Todd Previte wrote:
> Add the skeleton framework for supporting automation for Displayport compliance
> testing. This patch adds the necessary framework for the source device to
> appropriately respond to test automation requests from a sink device.
>
> V2:
> - Addressed previous mailing list feedback
> - Fixed compilation issue (struct members declared in a later patch)
> - Updated debug messages to be more accurate
> - Added status checks for the DPCD read/write calls
> - Removed excess comments and debug messages
> - Fixed debug message compilation warnings
> - Fixed compilation issue with missing variables
> - Updated link training autotest to ACK
>
> V3:
> - Fixed the checks on the DPCD return code to be <= 0
> rather than != 0
> - Removed extraneous assignment of a NAK return code in the
> DPCD read failure case
> - Changed the return in the DPCD read failure case to a goto
> to the exit point where the status code is written to the sink
> - Removed FAUX test case since it's deprecated now
> - Removed the compliance flag assignment in handle_test_request
>
> V4:
> - Moved declaration of type_type here
> - Removed declaration of test_data (moved to a later patch)
> - Added reset to 0 for compliance test variables
>
> V5:
> - Moved test_active variable declaration and initialization out of
> this patch and into the patch where it's used
> - Changed variable name compliance_testing_active to
> compliance_test_active to unify the naming convention
> - Added initialization for compliance_test_type variable
>
> Signed-off-by: Todd Previte <tprevite@gmail.com>
> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Queued for -next, thanks for the patch.
-Daniel
> ---
> drivers/gpu/drm/i915/intel_dp.c | 75 +++++++++++++++++++++++++++++++++++++---
> drivers/gpu/drm/i915/intel_drv.h | 3 ++
> 2 files changed, 74 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 14cdd00..263eff3 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3970,11 +3970,78 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)
> return true;
> }
>
> -static void
> -intel_dp_handle_test_request(struct intel_dp *intel_dp)
> +static uint8_t intel_dp_autotest_link_training(struct intel_dp *intel_dp)
> +{
> + uint8_t test_result = DP_TEST_ACK;
> + return test_result;
> +}
> +
> +static uint8_t intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
> +{
> + uint8_t test_result = DP_TEST_NAK;
> + return test_result;
> +}
> +
> +static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
> +{
> + uint8_t test_result = DP_TEST_NAK;
> + return test_result;
> +}
> +
> +static uint8_t intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp)
> +{
> + uint8_t test_result = DP_TEST_NAK;
> + return test_result;
> +}
> +
> +static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
> {
> - /* NAK by default */
> - drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_RESPONSE, DP_TEST_NAK);
> + uint8_t response = DP_TEST_NAK;
> + uint8_t rxdata = 0;
> + int status = 0;
> +
> + intel_dp->compliance_test_type = 0;
> + intel_dp->aux.i2c_nack_count = 0;
> + intel_dp->aux.i2c_defer_count = 0;
> +
> + status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_REQUEST, &rxdata, 1);
> + if (status <= 0) {
> + DRM_DEBUG_KMS("Could not read test request from sink\n");
> + goto update_status;
> + }
> +
> + switch (rxdata) {
> + case DP_TEST_LINK_TRAINING:
> + DRM_DEBUG_KMS("LINK_TRAINING test requested\n");
> + intel_dp->compliance_test_type = DP_TEST_LINK_TRAINING;
> + response = intel_dp_autotest_link_training(intel_dp);
> + break;
> + case DP_TEST_LINK_VIDEO_PATTERN:
> + DRM_DEBUG_KMS("TEST_PATTERN test requested\n");
> + intel_dp->compliance_test_type = DP_TEST_LINK_VIDEO_PATTERN;
> + response = intel_dp_autotest_video_pattern(intel_dp);
> + break;
> + case DP_TEST_LINK_EDID_READ:
> + DRM_DEBUG_KMS("EDID test requested\n");
> + intel_dp->compliance_test_type = DP_TEST_LINK_EDID_READ;
> + response = intel_dp_autotest_edid(intel_dp);
> + break;
> + case DP_TEST_LINK_PHY_TEST_PATTERN:
> + DRM_DEBUG_KMS("PHY_PATTERN test requested\n");
> + intel_dp->compliance_test_type = DP_TEST_LINK_PHY_TEST_PATTERN;
> + response = intel_dp_autotest_phy_pattern(intel_dp);
> + break;
> + default:
> + DRM_DEBUG_KMS("Invalid test request '%02x'\n", rxdata);
> + break;
> + }
> +
> +update_status:
> + status = drm_dp_dpcd_write(&intel_dp->aux,
> + DP_TEST_RESPONSE,
> + &response, 1);
> + if (status <= 0)
> + DRM_DEBUG_KMS("Could not write test response to sink\n");
> }
>
> static int
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 6a2ee0c..a4675fa 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -739,6 +739,9 @@ struct intel_dp {
> bool has_aux_irq,
> int send_bytes,
> uint32_t aux_clock_divider);
> +
> + /* Displayport compliance testing */
> + unsigned long compliance_test_type;
> };
>
> struct intel_digital_port {
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-04-16 11:30 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-15 15:38 [PATCH V6] Displayport compliance testing V6 Todd Previte
2015-04-15 15:38 ` [PATCH 01/10] drm/i915: Add automated testing support for Displayport compliance testing Todd Previte
2015-04-16 11:32 ` Daniel Vetter [this message]
2015-04-15 15:38 ` [PATCH 02/10] drm/i915: Update intel_dp_check_link_status() " Todd Previte
2015-04-15 19:28 ` [PATCH 02/12] " Todd Previte
2015-04-15 19:45 ` Paulo Zanoni
2015-04-15 15:38 ` [PATCH 03/10] drm/i915: Add EDID read in intel_dp_check_link_status() for Link CTS 4.2.2.1 Todd Previte
2015-04-15 17:15 ` [PATCH 03/12] " Todd Previte
2015-04-15 19:29 ` Todd Previte
2015-04-15 15:38 ` [PATCH 04/10] drm/i915: Add a delay in Displayport AUX transactions for compliance testing Todd Previte
2015-04-16 12:37 ` Daniel Vetter
2015-04-15 15:38 ` [PATCH 05/10] drm: Add supporting structure for Displayport Link CTS test 4.2.2.6 Todd Previte
2015-04-15 17:15 ` [PATCH 05/12] " Todd Previte
2015-04-15 20:25 ` [Intel-gfx] " Paulo Zanoni
2015-04-15 21:59 ` Todd Previte
2015-04-15 22:03 ` Todd Previte
2015-04-16 13:34 ` Paulo Zanoni
2015-04-16 14:02 ` Todd Previte
2015-04-16 15:47 ` Todd Previte
2015-04-15 15:38 ` [PATCH 06/10] drm/i915: Update intel_dp_hpd_pulse() for non-MST operation Todd Previte
2015-04-15 17:15 ` [PATCH 06/12] " Todd Previte
2015-04-16 7:22 ` Todd Previte
2015-04-15 15:38 ` [PATCH 07/10] drm/i915: Support EDID compliance tests with the intel_dp_autotest_edid() function Todd Previte
2015-04-15 17:16 ` [PATCH 07/12] " Todd Previte
2015-04-15 15:38 ` [PATCH 08/10] drm: Fix for DP CTS test 4.2.2.5 - I2C DEFER handling Todd Previte
2015-04-16 20:23 ` Paulo Zanoni
2015-04-15 15:38 ` [PATCH 09/10] drm/i915: Add debugfs test control files for Displayport compliance testing Todd Previte
2015-04-16 21:25 ` Paulo Zanoni
2015-04-15 15:38 ` [PATCH 10/10] drm: Fix the 'native defer' message in drm_dp_i2c_do_msg() Todd Previte
2015-04-16 12:42 ` Daniel Vetter
2015-04-16 12:44 ` Daniel Vetter
-- strict thread matches above, loose matches on Subject: below --
2014-10-09 15:38 [intel-gfx] Displayport compliance testing Todd Previte
2014-10-09 15:38 ` [PATCH 01/10] drm/i915: Add automated testing support for " Todd Previte
2014-10-20 17:48 ` Paulo Zanoni
2014-10-23 16:58 ` Todd Previte
2014-10-24 8:24 ` Daniel Vetter
2014-10-21 13:02 ` Daniel Vetter
2014-11-04 22:31 ` Todd Previte
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150416113203.GC5082@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=tprevite@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox