From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: "Sanchez, AdolfoX" <adolfox.sanchez@intel.com>
Cc: "intel-gfx@lists.freedesktop.org" <intel-gfx@lists.freedesktop.org>
Subject: Re: VBIOS doesn't recognize the eDP port on Baytrail-I
Date: Fri, 8 May 2015 14:44:27 +0300 [thread overview]
Message-ID: <20150508114427.GB18908@intel.com> (raw)
In-Reply-To: <56B36C37A8AFDD43BD486A5FC41A6D990C45CFF2@CRSMSX101.amr.corp.intel.com>
On Thu, May 07, 2015 at 10:44:21PM +0000, Sanchez, AdolfoX wrote:
> Which VBIOS should be used with the Baytrail-I when trying to configure two local flat panels as eDP
> The EMGD VBIOS creates a device_type 0x1004 and the i915 drivers looks for a device_type=0x1806 so it seems that the EMGD VBIOS should not be used with the Open Source Graphic drivers.
> The O.S. is Fedora 18.
I have no clue about EMGD VBIOS.
0x1004 does seem a bit bogus though. If I'm reading the spec correctly
that would be an internal DP+HDMI connector that is neither digital
or analog. OTOH we could potentially change the code to ignore
everything but the internal+DP bits in which case 0x1004 would
actually be detected as eDP.
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-05-08 11:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-07 22:44 VBIOS doesn't recognize the eDP port on Baytrail-I Sanchez, AdolfoX
2015-05-08 11:44 ` Ville Syrjälä [this message]
2015-05-11 2:55 ` Lim, Siew Hoon
2015-05-11 19:31 ` Sanchez, AdolfoX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150508114427.GB18908@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=adolfox.sanchez@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox