From: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ander Conselvan de Oliveira
<ander.conselvan.de.oliveira@intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 02/42] drm/i915: get rid of intel_crtc_disable and related code, v2
Date: Mon, 11 May 2015 19:08:25 +0200 [thread overview]
Message-ID: <20150511170825.GI15256@phenom.ffwll.local> (raw)
In-Reply-To: <1431354318-11995-3-git-send-email-maarten.lankhorst@linux.intel.com>
On Mon, May 11, 2015 at 04:24:38PM +0200, Maarten Lankhorst wrote:
> Now that the dpll updates are (mostly) atomic, the .off() code is no longer used,
> and there are no more callers for intel_put_shared_dpll. Move all the updates
> done in intel_crtc_disable to intel_modeset_update_state, one less special case
> to worry about.
The commit message is a bit innaccurate: We do still have callers of
put_shared_dpll, but that work is superseeded by
intel_shared_dpll_start_config. Hopefully.
Because of that I think this should be two patches: First one to nuke
put_shared_dpll, second one to inline crtc_disable.
One comment below.
>
> Changes since v1:
> - Move drm_atomic_helper_swap_state up.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 1 -
> drivers/gpu/drm/i915/intel_display.c | 106 +++++++----------------------------
> drivers/gpu/drm/i915/intel_drv.h | 1 -
> 3 files changed, 19 insertions(+), 89 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 6b3142a99171..a6d3ab94ec15 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -574,7 +574,6 @@ struct drm_i915_display_funcs {
> struct intel_crtc_state *crtc_state);
> void (*crtc_enable)(struct drm_crtc *crtc);
> void (*crtc_disable)(struct drm_crtc *crtc);
> - void (*off)(struct drm_crtc *crtc);
> void (*audio_codec_enable)(struct drm_connector *connector,
> struct intel_encoder *encoder,
> struct drm_display_mode *mode);
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index c5543f0bcda9..af96d686aae2 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4228,27 +4228,6 @@ static void lpt_pch_enable(struct drm_crtc *crtc)
> lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
> }
>
> -void intel_put_shared_dpll(struct intel_crtc *crtc)
> -{
> - struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
> -
> - if (pll == NULL)
> - return;
> -
> - if (!(pll->config.crtc_mask & (1 << crtc->pipe))) {
> - WARN(1, "bad %s crtc mask\n", pll->name);
> - return;
> - }
> -
> - pll->config.crtc_mask &= ~(1 << crtc->pipe);
> - if (pll->config.crtc_mask == 0) {
> - WARN_ON(pll->on);
> - WARN_ON(pll->active);
> - }
We're dropping the edge-detection warnings here. But I think the code in
check_shared_dpll_state should be paranoid enough to keep us covered.
Worth mentioning in the commit message though.
-Daniel
> -
> - crtc->config->shared_dpll = DPLL_ID_PRIVATE;
> -}
> -
> struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
> struct intel_crtc_state *crtc_state)
> {
> @@ -5224,13 +5203,6 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
> intel_disable_shared_dpll(intel_crtc);
> }
>
> -static void ironlake_crtc_off(struct drm_crtc *crtc)
> -{
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - intel_put_shared_dpll(intel_crtc);
> -}
> -
> -
> static void i9xx_pfit_enable(struct intel_crtc *crtc)
> {
> struct drm_device *dev = crtc->base.dev;
> @@ -6062,10 +6034,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
> mutex_unlock(&dev->struct_mutex);
> }
>
> -static void i9xx_crtc_off(struct drm_crtc *crtc)
> -{
> -}
> -
> /* Master function to enable/disable CRTC and corresponding power wells */
> void intel_crtc_control(struct drm_crtc *crtc, bool enable)
> {
> @@ -6115,34 +6083,6 @@ void intel_crtc_update_dpms(struct drm_crtc *crtc)
> crtc->state->active = enable;
> }
>
> -static void intel_crtc_disable(struct drm_crtc *crtc)
> -{
> - struct drm_device *dev = crtc->dev;
> - struct drm_connector *connector;
> - struct drm_i915_private *dev_priv = dev->dev_private;
> -
> - /* crtc should still be enabled when we disable it. */
> - WARN_ON(!crtc->state->enable);
> -
> - intel_crtc_disable_planes(crtc);
> - dev_priv->display.crtc_disable(crtc);
> - dev_priv->display.off(crtc);
> -
> - drm_plane_helper_disable(crtc->primary);
> -
> - /* Update computed state. */
> - list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
> - if (!connector->encoder || !connector->encoder->crtc)
> - continue;
> -
> - if (connector->encoder->crtc != crtc)
> - continue;
> -
> - connector->dpms = DRM_MODE_DPMS_OFF;
> - to_intel_encoder(connector->encoder)->connectors_active = false;
> - }
> -}
> -
> void intel_encoder_destroy(struct drm_encoder *encoder)
> {
> struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
> @@ -11614,26 +11554,22 @@ intel_modeset_update_state(struct drm_atomic_state *state)
> struct drm_crtc *crtc;
> struct drm_crtc_state *crtc_state;
> struct drm_connector *connector;
> - int i;
>
> intel_shared_dpll_commit(dev_priv);
> + drm_atomic_helper_swap_state(state->dev, state);
>
> for_each_intel_encoder(dev, intel_encoder) {
> if (!intel_encoder->base.crtc)
> continue;
>
> - for_each_crtc_in_state(state, crtc, crtc_state, i)
> - if (crtc == intel_encoder->base.crtc)
> - break;
> -
> - if (crtc != intel_encoder->base.crtc)
> + crtc = intel_encoder->base.crtc;
> + crtc_state = state->crtc_states[drm_crtc_index(crtc)];
> + if (!crtc_state || !needs_modeset(crtc->state))
> continue;
>
> - if (crtc_state->enable && needs_modeset(crtc_state))
> - intel_encoder->connectors_active = false;
> + intel_encoder->connectors_active = false;
> }
>
> - drm_atomic_helper_swap_state(state->dev, state);
> intel_modeset_fixup_state(state);
>
> /* Double check state. */
> @@ -11645,14 +11581,12 @@ intel_modeset_update_state(struct drm_atomic_state *state)
> if (!connector->encoder || !connector->encoder->crtc)
> continue;
>
> - for_each_crtc_in_state(state, crtc, crtc_state, i)
> - if (crtc == connector->encoder->crtc)
> - break;
> -
> - if (crtc != connector->encoder->crtc)
> + crtc = connector->encoder->crtc;
> + crtc_state = state->crtc_states[drm_crtc_index(crtc)];
> + if (!crtc_state || !needs_modeset(crtc->state))
> continue;
>
> - if (crtc->state->enable && needs_modeset(crtc->state)) {
> + if (crtc->state->enable) {
> struct drm_property *dpms_property =
> dev->mode_config.dpms_property;
>
> @@ -11663,7 +11597,8 @@ intel_modeset_update_state(struct drm_atomic_state *state)
>
> intel_encoder = to_intel_encoder(connector->encoder);
> intel_encoder->connectors_active = true;
> - }
> + } else
> + connector->dpms = DRM_MODE_DPMS_OFF;
> }
>
> }
> @@ -12214,6 +12149,10 @@ intel_modeset_compute_config(struct drm_crtc *crtc,
> if (IS_ERR(pipe_config))
> return pipe_config;
>
> + if (!pipe_config->base.enable &&
> + WARN_ON(pipe_config->base.active))
> + pipe_config->base.active = false;
> +
> if (!pipe_config->base.enable)
> return pipe_config;
>
> @@ -12341,12 +12280,10 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
> if (!needs_modeset(crtc_state))
> continue;
>
> - if (!crtc_state->enable) {
> - intel_crtc_disable(crtc);
> - } else if (crtc->state->enable) {
> - intel_crtc_disable_planes(crtc);
> - dev_priv->display.crtc_disable(crtc);
> - }
> + intel_crtc_disable_planes(crtc);
> + dev_priv->display.crtc_disable(crtc);
> + if (!crtc_state->enable)
> + drm_plane_helper_disable(crtc->primary);
> }
>
> /* crtc->mode is already used by the ->mode_set callbacks, hence we need
> @@ -14064,7 +14001,6 @@ static void intel_init_display(struct drm_device *dev)
> haswell_crtc_compute_clock;
> dev_priv->display.crtc_enable = haswell_crtc_enable;
> dev_priv->display.crtc_disable = haswell_crtc_disable;
> - dev_priv->display.off = ironlake_crtc_off;
> dev_priv->display.update_primary_plane =
> skylake_update_primary_plane;
> } else if (HAS_DDI(dev)) {
> @@ -14075,7 +14011,6 @@ static void intel_init_display(struct drm_device *dev)
> haswell_crtc_compute_clock;
> dev_priv->display.crtc_enable = haswell_crtc_enable;
> dev_priv->display.crtc_disable = haswell_crtc_disable;
> - dev_priv->display.off = ironlake_crtc_off;
> dev_priv->display.update_primary_plane =
> ironlake_update_primary_plane;
> } else if (HAS_PCH_SPLIT(dev)) {
> @@ -14086,7 +14021,6 @@ static void intel_init_display(struct drm_device *dev)
> ironlake_crtc_compute_clock;
> dev_priv->display.crtc_enable = ironlake_crtc_enable;
> dev_priv->display.crtc_disable = ironlake_crtc_disable;
> - dev_priv->display.off = ironlake_crtc_off;
> dev_priv->display.update_primary_plane =
> ironlake_update_primary_plane;
> } else if (IS_VALLEYVIEW(dev)) {
> @@ -14096,7 +14030,6 @@ static void intel_init_display(struct drm_device *dev)
> dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
> dev_priv->display.crtc_enable = valleyview_crtc_enable;
> dev_priv->display.crtc_disable = i9xx_crtc_disable;
> - dev_priv->display.off = i9xx_crtc_off;
> dev_priv->display.update_primary_plane =
> i9xx_update_primary_plane;
> } else {
> @@ -14106,7 +14039,6 @@ static void intel_init_display(struct drm_device *dev)
> dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
> dev_priv->display.crtc_enable = i9xx_crtc_enable;
> dev_priv->display.crtc_disable = i9xx_crtc_disable;
> - dev_priv->display.off = i9xx_crtc_off;
> dev_priv->display.update_primary_plane =
> i9xx_update_primary_plane;
> }
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 29262228f264..4c690403942c 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1082,7 +1082,6 @@ void assert_shared_dpll(struct drm_i915_private *dev_priv,
> #define assert_shared_dpll_disabled(d, p) assert_shared_dpll(d, p, false)
> struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
> struct intel_crtc_state *state);
> -void intel_put_shared_dpll(struct intel_crtc *crtc);
>
> void vlv_force_pll_on(struct drm_device *dev, enum pipe pipe,
> const struct dpll *dpll);
> --
> 2.1.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-05-11 17:06 UTC|newest]
Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-11 14:24 [PATCH 00/42] drm/i915: Convert to atomic, part 2 Maarten Lankhorst
2015-05-11 14:24 ` [PATCH 01/42] drm/atomic: Allow drivers to subclass drm_atomic_state Maarten Lankhorst
2015-05-13 5:52 ` Daniel Vetter
2015-05-11 14:24 ` [PATCH 02/42] drm/i915: get rid of intel_crtc_disable and related code, v2 Maarten Lankhorst
2015-05-11 17:08 ` Daniel Vetter [this message]
2015-05-11 14:24 ` [PATCH 03/42] drm/i915: Only update required power domains Maarten Lankhorst
2015-05-11 17:00 ` Daniel Vetter
2015-05-12 12:05 ` Maarten Lankhorst
2015-05-12 13:13 ` Daniel Vetter
2015-05-11 14:24 ` [PATCH 04/42] drm/i915: use intel_crtc_control everywhere Maarten Lankhorst
2015-05-11 17:11 ` Daniel Vetter
2015-05-12 12:06 ` Maarten Lankhorst
2015-05-12 13:16 ` Daniel Vetter
2015-05-12 14:38 ` Daniel Stone
2015-05-11 14:24 ` [PATCH 05/42] drm/i915: Get rid of new_encoder Maarten Lankhorst
2015-05-11 17:17 ` Daniel Vetter
2015-05-11 14:24 ` [PATCH 06/42] drm/i915: get rid of new_crtc Maarten Lankhorst
2015-05-11 17:28 ` Daniel Vetter
2015-05-12 12:07 ` Maarten Lankhorst
2015-05-11 14:24 ` [PATCH 07/42] drm/i915: Get rid of crtc->new_enabled, v2 Maarten Lankhorst
2015-05-11 17:33 ` Daniel Vetter
2015-05-11 17:44 ` Daniel Vetter
2015-05-11 14:24 ` [PATCH 08/42] drm/i915: Implement intel_crtc_toggle using atomic state Maarten Lankhorst
2015-05-11 18:12 ` Daniel Vetter
2015-05-11 14:24 ` [PATCH 09/42] drm/i915: Make intel_modeset_fixup_state similar to the atomic helper Maarten Lankhorst
2015-05-12 6:59 ` Daniel Vetter
2015-05-12 12:41 ` Maarten Lankhorst
2015-05-12 13:18 ` Daniel Vetter
2015-05-11 14:24 ` [PATCH 10/42] drm/i915: make plane helpers fully atomic Maarten Lankhorst
2015-05-12 8:18 ` Daniel Vetter
2015-05-12 13:33 ` Maarten Lankhorst
2015-05-12 13:43 ` Ville Syrjälä
2015-05-12 13:46 ` Ville Syrjälä
2015-05-12 15:31 ` Daniel Vetter
2015-05-12 16:00 ` Daniel Vetter
2015-05-11 14:24 ` [PATCH 11/42] drm/i915: Update less state during modeset Maarten Lankhorst
2015-05-12 8:22 ` Daniel Vetter
2015-05-11 14:24 ` [PATCH 12/42] drm/i915: move swap_state to the right place Maarten Lankhorst
2015-05-12 8:25 ` Daniel Vetter
2015-05-11 14:24 ` [PATCH 13/42] drm/i915: Set mode_changed for audio in intel_modeset_pipe_config() Maarten Lankhorst
2015-05-11 14:24 ` [PATCH 14/42] drm/i915: Make __intel_set_mode() take only atomic state as argument Maarten Lankhorst
2015-05-11 14:24 ` [PATCH 15/42] drm/i915: Use hwmode for vblanks Maarten Lankhorst
2015-05-11 14:24 ` [PATCH 16/42] drm/i915: Remove usage of crtc->config from i915_debugfs.c Maarten Lankhorst
2015-05-12 8:51 ` Daniel Vetter
2015-05-11 14:24 ` [PATCH 17/42] drm/i915: Remove use of crtc->config from intel_pm.c Maarten Lankhorst
2015-05-12 8:54 ` Daniel Vetter
2015-05-11 14:24 ` [PATCH 18/42] drm/i915: Remove use of crtc->config from intel_audio.c Maarten Lankhorst
2015-05-11 14:24 ` [PATCH 19/42] drm/i915: remove use of crtc->config from intel_fbc.c Maarten Lankhorst
2015-05-11 14:24 ` [PATCH 20/42] drm/i915: remove use of crtc->config from intel_atomic.c and intel_sprite.c Maarten Lankhorst
2015-05-12 9:03 ` Daniel Vetter
2015-05-12 13:36 ` Maarten Lankhorst
2015-05-11 14:24 ` [PATCH 21/42] drm/i915: Remove use of crtc->config from intel_overlay.c Maarten Lankhorst
2015-05-12 9:06 ` Daniel Vetter
2015-05-11 14:24 ` [PATCH 22/42] drm/i915: Pass old state to crtc_disable and use it Maarten Lankhorst
2015-05-12 9:13 ` Daniel Vetter
2015-05-11 14:24 ` [PATCH 23/42] drm/i915: Pass old state to encoder->(post_)disable Maarten Lankhorst
2015-05-12 9:16 ` Daniel Vetter
2015-05-11 14:25 ` [PATCH 24/42] drm/i915: Remove use of crtc->config from intel_fbdev.c Maarten Lankhorst
2015-05-11 14:25 ` [PATCH 25/42] drm/i915: Remove use of crtc->config from intel_psr.c Maarten Lankhorst
2015-05-12 9:20 ` Daniel Vetter
2015-05-12 13:41 ` Maarten Lankhorst
2015-05-11 14:25 ` [PATCH 26/42] drm/i915: Remove use of crtc->config from intel_ddi.c Maarten Lankhorst
2015-05-11 14:25 ` [PATCH 27/42] drm/i915: Remove use of crtc->config from intel_dp.c Maarten Lankhorst
2015-05-12 9:22 ` Daniel Vetter
2015-05-12 13:43 ` Maarten Lankhorst
2015-05-11 14:25 ` [PATCH 28/42] drm/i915: Remove use of crtc->config from intel_dp_mst.c Maarten Lankhorst
2015-05-11 14:25 ` [PATCH 29/42] drm/i915: Remove use of crtc->config from intel_dsi.c Maarten Lankhorst
2015-05-11 14:25 ` [PATCH 30/42] drm/i915: Remove use of crtc->config in intel_hdmi.c Maarten Lankhorst
2015-05-12 9:26 ` Daniel Vetter
2015-05-11 14:25 ` [PATCH 31/42] drm/i915: Remove use of crtc->config in intel_sdvo.c Maarten Lankhorst
2015-05-11 14:25 ` [PATCH 32/42] drm/i915: Calculate haswell plane workaround Maarten Lankhorst
2015-05-12 9:43 ` Daniel Vetter
2015-05-12 14:05 ` Maarten Lankhorst
2015-05-12 16:54 ` Daniel Vetter
2015-05-11 14:25 ` [PATCH 33/42] drm/i915: remove crtc->active tracking completely Maarten Lankhorst
2015-05-12 9:55 ` Daniel Vetter
2015-05-12 10:03 ` Daniel Vetter
2015-05-12 14:07 ` Maarten Lankhorst
2015-05-12 16:57 ` Daniel Vetter
2015-05-12 17:01 ` Daniel Stone
2015-05-12 17:08 ` Daniel Vetter
2015-05-11 14:25 ` [PATCH 34/42] drm/i915: get rid of crtc->config in intel_display.c, part 1 Maarten Lankhorst
2015-05-12 10:11 ` Daniel Vetter
2015-05-12 14:13 ` Maarten Lankhorst
2015-05-12 17:01 ` Daniel Vetter
2015-05-11 14:25 ` [PATCH 35/42] drm/i915: get rid of crtc->config in intel_display.c, part 2 Maarten Lankhorst
2015-05-12 10:17 ` Daniel Vetter
2015-05-11 14:25 ` [PATCH 36/42] drm/i915: get rid of crtc->config Maarten Lankhorst
2015-05-11 14:25 ` [PATCH 37/42] drm/i915: swap state correctly in intel_atomic_commit Maarten Lankhorst
2015-05-12 13:03 ` Daniel Vetter
2015-05-12 14:16 ` Maarten Lankhorst
2015-05-12 17:03 ` Daniel Vetter
2015-05-11 14:25 ` [PATCH 38/42] drm/i915: Use global atomic state for staged pll config Maarten Lankhorst
2015-05-11 14:25 ` [PATCH 39/42] drm/i915: Support modeset across multiple pipes Maarten Lankhorst
2015-05-11 14:25 ` [PATCH 40/42] drm/i915: Move cdclk and pll setup to intel_modeset_compute_config() Maarten Lankhorst
2015-05-11 14:25 ` [PATCH 41/42] drm/i915: Read hw state into an atomic state struct Maarten Lankhorst
2015-05-11 14:25 ` [PATCH 42/42] drm/i915: return early in __intel_set_mode_setup_plls without modeset Maarten Lankhorst
2015-05-13 7:04 ` [PATCH 00/42] drm/i915: Convert to atomic, part 2 Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150511170825.GI15256@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=ander.conselvan.de.oliveira@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=maarten.lankhorst@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox