Re: [PATCH] drm/i915: Add the ddi get cdclk code for BXT.

From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH] drm/i915: Add the ddi get cdclk code for BXT.
Date: Mon, 15 Jun 2015 11:59:09 +0300	[thread overview]
Message-ID: <20150615085909.GG5176@intel.com> (raw)
In-Reply-To: <1433967508-23108-1-git-send-email-bob.j.paauwe@intel.com>

On Wed, Jun 10, 2015 at 01:18:28PM -0700, Bob Paauwe wrote:
> The registers and process differ from other platforms.
> 
> Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_display.c | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index c38c297..41464a5 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -6687,6 +6687,30 @@ static int skylake_get_display_clock_speed(struct drm_device *dev)
>  	return 24000;
>  }
>  
> +static int broxton_get_display_clock_speed(struct drm_device *dev)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(dev);
> +	uint32_t cdctl = I915_READ(CDCLK_CTL);
> +	uint32_t pll_freq = I915_READ(BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
> +

You should return 19.2MHz if the DE PLL isn't enabled.

> +	switch (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) {
> +	case BXT_CDCLK_CD2X_DIV_SEL_1:
> +		if (pll_freq == BXT_DE_PLL_RATIO(60)) /* PLL freq = 1152MHz */
> +			return 576000;
> +		else /* PLL freq = 1248MHz */
> +			return 624000;
> +	case BXT_CDCLK_CD2X_DIV_SEL_1_5:
> +		return 384000;
> +	case BXT_CDCLK_CD2X_DIV_SEL_2:
> +		return 288000;
> +	case BXT_CDCLK_CD2X_DIV_SEL_4:
> +		return 144000;
> +	}
> +
> +	/* error case, assume higer PLL freq. */
> +	return 624000;
> +}
> +
>  static int broadwell_get_display_clock_speed(struct drm_device *dev)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -14649,6 +14673,9 @@ static void intel_init_display(struct drm_device *dev)
>  	if (IS_SKYLAKE(dev))
>  		dev_priv->display.get_display_clock_speed =
>  			skylake_get_display_clock_speed;
> +	else if (IS_BROXTON(dev))
> +		dev_priv->display.get_display_clock_speed =
> +			broxton_get_display_clock_speed;
>  	else if (IS_BROADWELL(dev))
>  		dev_priv->display.get_display_clock_speed =
>  			broadwell_get_display_clock_speed;
> -- 
> 2.1.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx