public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Damien Lespiau <damien.lespiau@intel.com>
To: Kausal Malladi <Kausal.Malladi@intel.com>
Cc: dhanya.p.r@intel.com, annie.j.matheson@intel.com,
	intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	vijay.a.purushothaman@intel.com, hverkuil@xs4all.nl,
	jesse.barnes@intel.com, daniel.vetter@intel.com
Subject: Re: [PATCH 09/12] drm/i915: Add pipe level Gamma correction for CHV/BSW
Date: Thu, 2 Jul 2015 17:00:12 +0100	[thread overview]
Message-ID: <20150702160011.GA7203@strange.ger.corp.intel.com> (raw)
In-Reply-To: <1435765702-3094-10-git-send-email-Kausal.Malladi@intel.com>

On Wed, Jul 01, 2015 at 09:18:19PM +0530, Kausal Malladi wrote:
> From: Kausal Malladi <Kausal.Malladi@intel.com>
> 
> CHV/BSW platform supports various Gamma correction modes, which are:
> 1. Legacy 8-bit mode
> 2. 10-bit CGM (Color Gamut Mapping) mode
> 
> This patch does the following:
> 1. Adds the core function to program Gamma correction values for CHV/BSW
>    platform
> 2. Adds Gamma correction macros/defines
> 
> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
> Signed-off-by: Kausal Malladi <Kausal.Malladi@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h            |  10 ++
>  drivers/gpu/drm/i915/intel_atomic.c        |   6 ++
>  drivers/gpu/drm/i915/intel_color_manager.c | 154 +++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_color_manager.h |  12 +++
>  drivers/gpu/drm/i915/intel_drv.h           |   2 +
>  5 files changed, 184 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 313b1f9..36672e7 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7900,4 +7900,14 @@ enum skl_disp_power_wells {
>  #define _PALETTE_A (dev_priv->info.display_mmio_offset + 0xa000)
>  #define _PALETTE_B (dev_priv->info.display_mmio_offset + 0xa800)
>  
> +/* Color Management */
> +#define PIPEA_CGM_CONTROL			(VLV_DISPLAY_BASE + 0x67A00)
> +#define PIPEA_CGM_GAMMA_MIN			(VLV_DISPLAY_BASE + 0x67000)
> +#define CGM_OFFSET				0x2000
> +#define GAMMA_OFFSET				0x2000
> +#define _PIPE_CGM_CONTROL(pipe) \
> +	(PIPEA_CGM_CONTROL + (pipe * CGM_OFFSET))
> +#define _PIPE_GAMMA_BASE(pipe) \
> +	(PIPEA_CGM_GAMMA_MIN + (pipe * GAMMA_OFFSET))

We use the _PIPE() macro with tha pipe A and B registers for those ,
instead of having to defies the offsets.

>  #endif /* _I915_REG_H_ */
> diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
> index d2674a6..21f0ac2 100644
> --- a/drivers/gpu/drm/i915/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> @@ -473,6 +473,12 @@ int intel_crtc_atomic_set_property(struct drm_crtc *crtc,
>  				   struct drm_property *property,
>  				   uint64_t val)
>  {
> +	struct drm_device *dev = crtc->dev;
> +	struct drm_mode_config *config = &dev->mode_config;
> +
> +	if (property == config->prop_palette_after_ctm)
> +		return intel_color_manager_set_gamma(dev, &crtc->base, val);
> +
>  	DRM_DEBUG_KMS("Unknown crtc property '%s'\n", property->name);
>  	return -EINVAL;
>  }

You are touching the hardware instead of staging the configuration?

> diff --git a/drivers/gpu/drm/i915/intel_color_manager.c b/drivers/gpu/drm/i915/intel_color_manager.c
> index 71b4c05..84cc3e47 100644
> --- a/drivers/gpu/drm/i915/intel_color_manager.c
> +++ b/drivers/gpu/drm/i915/intel_color_manager.c
> @@ -27,6 +27,160 @@
>  
>  #include "intel_color_manager.h"
>  
> +int chv_set_gamma(struct drm_device *dev, uint32_t blob_id,
> +		  struct drm_crtc *crtc)
> +{
> +	if (num_samples == 0) {

[...]

> +	} else if (num_samples == CHV_8BIT_GAMMA_MAX_VALS) {

[...]
> +	} else if (num_samples == CHV_10BIT_GAMMA_MAX_VALS) {

[...]

> +	} else {
> +		DRM_ERROR("Invalid number of samples for Gamma LUT\n");
> +		return -EINVAL;
> +	}

This means you're not accepting 256 values, something we do today with
the legacy ioctl() and something we probably want for generic userspace.

> +	ret = drm_property_replace_global_blob(dev, &blob, length,
> +			(void *) gamma_data, &crtc->base,
> +			config->prop_palette_after_ctm);
> +
> +	if (ret) {
> +		DRM_ERROR("Error updating Gamma blob\n");
> +		return -EFAULT;
> +	}
> +
> +	return ret;
> +}
> +
> +int intel_color_manager_set_gamma(struct drm_device *dev,
> +		struct drm_mode_object *obj, uint32_t blob_id)
> +{
> +	struct drm_crtc *crtc = obj_to_crtc(obj);
> +
> +	if (IS_CHERRYVIEW(dev))
> +		return chv_set_gamma(dev, blob_id, crtc);
> +
> +	return -EINVAL;
> +}
> +
>  int get_chv_pipe_capabilities(struct drm_device *dev,
>  		struct drm_color_caps *color_caps, struct drm_crtc *crtc)
>  {
> diff --git a/drivers/gpu/drm/i915/intel_color_manager.h b/drivers/gpu/drm/i915/intel_color_manager.h
> index 32262ac..d83567a 100644
> --- a/drivers/gpu/drm/i915/intel_color_manager.h
> +++ b/drivers/gpu/drm/i915/intel_color_manager.h
> @@ -31,6 +31,8 @@
>  #define CHV_PALETTE_STRUCT_VERSION		1
>  #define CHV_CTM_STRUCT_VERSION			1
>  #define CHV_PLATFORM_STRUCT_VERSION		1
> +#define CHV_GAMMA_DATA_STRUCT_VERSION		1
> +
>  #define CHV_MAX_PALETTE_CAPS_BEFORE_CTM		1
>  #define CHV_MAX_PALETTE_CAPS_AFTER_CTM		2
>  #define CHV_DEGAMMA_PRECISION			14
> @@ -43,6 +45,16 @@
>  #define CHV_10BIT_GAMMA_MAX_VALS		257
>  #define CHV_8BIT_GAMMA_PRECISION		8
>  #define CHV_8BIT_GAMMA_MAX_VALS			256
> +#define CHV_8BIT_GAMMA_MSB_SHIFT		8
> +#define CHV_8BIT_GAMMA_SHIFT_RED_REG		16
> +#define CHV_8BIT_GAMMA_SHIFT_GREEN_REG		8
> +#define CHV_10BIT_GAMMA_MSB_SHIFT		6
> +#define CHV_GAMMA_SHIFT_GREEN			16
> +
>  #define CHV_CSC_COEFF_MAX_PRECISION		12
>  #define CHV_CSC_COEFF_MAX_INT			7
>  #define CHV_CSC_COEFF_MIN_INT			-7
> +
> +/* CHV CGM Block */
> +/* Bit 2 to be enabled in CGM block for CHV */
> +#define CGM_GAMMA_EN				4
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 053ceb0..a7aaadf 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1453,5 +1453,7 @@ extern const struct drm_plane_helper_funcs intel_plane_helper_funcs;
>  /* intel_color_manager.c */
>  void intel_color_manager_attach(struct drm_device *dev,
>  		struct drm_mode_object *mode_obj);
> +int intel_color_manager_set_gamma(struct drm_device *dev,
> +		struct drm_mode_object *obj, uint32_t blob_id);
>  
>  #endif /* __INTEL_DRV_H__ */
> -- 
> 2.4.5
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

       reply	other threads:[~2015-07-02 16:00 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1435765702-3094-1-git-send-email-Kausal.Malladi@intel.com>
     [not found] ` <1435765702-3094-10-git-send-email-Kausal.Malladi@intel.com>
2015-07-02 16:00   ` Damien Lespiau [this message]
2015-07-03  8:03     ` [PATCH 09/12] drm/i915: Add pipe level Gamma correction for CHV/BSW Jani Nikula
2015-07-03  8:29       ` [Intel-gfx] " Malladi, Kausal
2015-07-03  8:58         ` Jani Nikula
     [not found] ` <1435765702-3094-5-git-send-email-Kausal.Malladi@intel.com>
2015-07-02 16:20   ` [PATCH 04/12] drm: Add structures for querying color capabilities Damien Lespiau
2015-07-02 16:45     ` Damien Lespiau
2015-07-02 17:04       ` [Intel-gfx] " Ville Syrjälä
2015-07-03  6:41         ` Daniel Vetter
2015-07-03 10:28           ` Damien Lespiau
2015-07-03 12:36             ` [Intel-gfx] " Ville Syrjälä
     [not found] ` <1435765702-3094-8-git-send-email-Kausal.Malladi@intel.com>
2015-07-02 16:30   ` [PATCH 07/12] drm: Add structures to set/get a palette color property Damien Lespiau
     [not found] ` <1435765702-3094-9-git-send-email-Kausal.Malladi@intel.com>
2015-07-02 16:32   ` [PATCH 08/12] drm: Export drm_property_replace_global_blob function Damien Lespiau
     [not found] ` <1435765702-3094-4-git-send-email-Kausal.Malladi@intel.com>
2015-07-02 16:25   ` [PATCH 03/12] drm/i915: Attach color properties to CRTC Damien Lespiau
2015-07-02 16:35   ` Damien Lespiau
2015-07-03  3:31 [PATCH 00/12] Color Manager Implementation Kausal Malladi
2015-07-03  3:31 ` [PATCH 09/12] drm/i915: Add pipe level Gamma correction for CHV/BSW Kausal Malladi
2015-07-07 23:23   ` Matt Roper
2015-07-11 10:00     ` Malladi, Kausal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150702160011.GA7203@strange.ger.corp.intel.com \
    --to=damien.lespiau@intel.com \
    --cc=Kausal.Malladi@intel.com \
    --cc=annie.j.matheson@intel.com \
    --cc=daniel.vetter@intel.com \
    --cc=dhanya.p.r@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hverkuil@xs4all.nl \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jesse.barnes@intel.com \
    --cc=vijay.a.purushothaman@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox