public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Sonika Jindal <sonika.jindal@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: Handle HPD when it has actually occurred
Date: Tue, 7 Jul 2015 16:21:40 +0300	[thread overview]
Message-ID: <20150707132140.GX5176@intel.com> (raw)
In-Reply-To: <1436259140-777-1-git-send-email-sonika.jindal@intel.com>

On Tue, Jul 07, 2015 at 02:22:20PM +0530, Sonika Jindal wrote:
> Writing to PCH_PORT_HOTPLUG for each interrupt is not required.
> Handle it only if hpd has actually occurred like we handle other
> interrupts.
> v2: Make few variables local to if block (Ville)
> v3: Add check for ibx/cpt both (Ville).
>     While at it, remove the redundant check for hotplug_trigger from
>     pch_get_hpd_pins
> 
> Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_irq.c |   32 +++++++++++++++++---------------
>  1 file changed, 17 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index a6fbe64..ba2c27c 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -1266,9 +1266,6 @@ static void pch_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
>  	*pin_mask = 0;
>  	*long_mask = 0;
>  
> -	if (!hotplug_trigger)
> -		return;
> -

Looks like BXT still depends on that. So you should change that too,
or leave this in until someone else does it.

>  	for_each_hpd_pin(i) {
>  		if ((hpd[i] & hotplug_trigger) == 0)
>  			continue;
> @@ -1658,14 +1655,17 @@ static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	int pipe;
>  	u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK;
> -	u32 dig_hotplug_reg;
> -	u32 pin_mask, long_mask;
>  
> -	dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
> -	I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
> +	if (hotplug_trigger) {
> +		u32 dig_hotplug_reg, pin_mask, long_mask;
>  
> -	pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, dig_hotplug_reg, hpd_ibx);
> -	intel_hpd_irq_handler(dev, pin_mask, long_mask);
> +		dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
> +		I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
> +
> +		pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
> +						dig_hotplug_reg, hpd_ibx);

Indentation is fubar.

> +		intel_hpd_irq_handler(dev, pin_mask, long_mask);
> +	}
>  
>  	if (pch_iir & SDE_AUDIO_POWER_MASK) {
>  		int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK) >>
> @@ -1757,14 +1757,16 @@ static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	int pipe;
>  	u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_CPT;
> -	u32 dig_hotplug_reg;
> -	u32 pin_mask, long_mask;
>  
> -	dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
> -	I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
> +	if (hotplug_trigger) {
> +		u32 dig_hotplug_reg, pin_mask, long_mask;
>  
> -	pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, dig_hotplug_reg, hpd_cpt);
> -	intel_hpd_irq_handler(dev, pin_mask, long_mask);
> +		dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
> +		I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
> +		pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
> +						dig_hotplug_reg, hpd_cpt);

Ditto

With those fixed this is
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

> +		intel_hpd_irq_handler(dev, pin_mask, long_mask);
> +	}
>  
>  	if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) {
>  		int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
> -- 
> 1.7.10.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-07-07 13:21 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-06  5:53 [PATCH] [RFC] drm/i915: Handle HPD when it has actually occurred Sonika Jindal
2015-07-06  8:36 ` Daniel Vetter
2015-07-06  8:41   ` Jindal, Sonika
2015-07-06 12:24     ` Daniel Vetter
2015-07-06  8:49 ` Ville Syrjälä
2015-07-06  9:01   ` Jindal, Sonika
2015-07-06 11:18     ` Ville Syrjälä
2015-07-07  8:52       ` [PATCH] " Sonika Jindal
2015-07-07 13:21         ` Ville Syrjälä [this message]
2015-07-08  5:10           ` Jindal, Sonika
2015-07-08  8:48             ` Ville Syrjälä
2015-07-08 11:37               ` Sonika Jindal
2015-07-08 15:18                 ` Daniel Vetter
2015-10-01 14:17                   ` Jani Nikula
2015-07-08  8:13         ` shuang.he
2015-07-06 10:08   ` Sonika Jindal
2015-07-07  5:55     ` shuang.he
2015-07-06  9:54 ` [PATCH] [RFC] " shuang.he

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150707132140.GX5176@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=sonika.jindal@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox