From: Rafael Antognolli <rafael.antognolli@intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 4/7] drm/i915: Split sink_crc function in start, stop and read.
Date: Tue, 28 Jul 2015 13:10:38 -0700 [thread overview]
Message-ID: <20150728201038.GA5902@intel.com> (raw)
In-Reply-To: <1437694550-5667-3-git-send-email-rodrigo.vivi@intel.com>
On Thu, Jul 23, 2015 at 04:35:47PM -0700, Rodrigo Vivi wrote:
> No functional change. Just a preparation patch to make clear
> what operation we are performing.
>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Good. The place where you call hsw_disable_ips() changes, but as you
explained earlier, this is required.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 89 +++++++++++++++++++++++------------------
> 1 file changed, 50 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 44f8a32..10cbc98 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3958,40 +3958,64 @@ intel_dp_probe_mst(struct intel_dp *intel_dp)
> return intel_dp->is_mst;
> }
>
> -int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
> +static void intel_dp_sink_crc_stop(struct intel_dp *intel_dp)
> {
> - struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> - struct drm_device *dev = intel_dig_port->base.base.dev;
> - struct intel_crtc *intel_crtc =
> - to_intel_crtc(intel_dig_port->base.base.crtc);
> + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> + struct intel_crtc *intel_crtc = to_intel_crtc(dig_port->base.base.crtc);
> u8 buf;
> - int test_crc_count;
> - int attempts = 6;
> - int ret = 0;
> -
> - hsw_disable_ips(intel_crtc);
>
> - if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0) {
> - ret = -EIO;
> - goto out;
> + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0) {
> + DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n");
> + return;
> }
>
> - if (!(buf & DP_TEST_CRC_SUPPORTED)) {
> - ret = -ENOTTY;
> - goto out;
> - }
> + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK,
> + buf & ~DP_TEST_SINK_START) < 0)
> + DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n");
>
> - if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0) {
> - ret = -EIO;
> - goto out;
> - }
> + hsw_enable_ips(intel_crtc);
> +}
> +
> +static int intel_dp_sink_crc_start(struct intel_dp *intel_dp)
> +{
> + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> + struct intel_crtc *intel_crtc = to_intel_crtc(dig_port->base.base.crtc);
> + u8 buf;
> +
> + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0)
> + return -EIO;
> +
> + if (!(buf & DP_TEST_CRC_SUPPORTED))
> + return -ENOTTY;
> +
> + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0)
> + return -EIO;
> +
> + hsw_disable_ips(intel_crtc);
>
> if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK,
> - buf | DP_TEST_SINK_START) < 0) {
> - ret = -EIO;
> - goto out;
> + buf | DP_TEST_SINK_START) < 0) {
> + hsw_enable_ips(intel_crtc);
> + return -EIO;
> }
>
> + return 0;
> +}
> +
> +int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
> +{
> + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> + struct drm_device *dev = dig_port->base.base.dev;
> + struct intel_crtc *intel_crtc = to_intel_crtc(dig_port->base.base.crtc);
> + u8 buf;
> + int test_crc_count;
> + int attempts = 6;
> + int ret;
> +
> + ret = intel_dp_sink_crc_start(intel_dp);
> + if (ret)
> + return ret;
> +
> if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0) {
> ret = -EIO;
> goto stop;
> @@ -4014,23 +4038,10 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
> goto stop;
> }
>
> - if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0) {
> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0)
> ret = -EIO;
> - goto stop;
> - }
> -
> stop:
> - if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0) {
> - DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n");
> - goto out;
> - }
> - if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK,
> - buf & ~DP_TEST_SINK_START) < 0) {
> - DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n");
> - goto out;
> - }
> -out:
> - hsw_enable_ips(intel_crtc);
> + intel_dp_sink_crc_stop(intel_dp);
> return ret;
> }
>
> --
> 2.1.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-07-28 20:13 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-23 23:35 [PATCH 2/7] drm/i915: Try to stop sink crc calculation on error Rodrigo Vivi
2015-07-23 23:35 ` [PATCH 3/7] drm/i915: Don't return error on sink crc stop Rodrigo Vivi
2015-07-24 18:22 ` Rafael Antognolli
2015-07-24 18:33 ` Rodrigo Vivi
2015-07-23 23:35 ` [PATCH 4/7] drm/i915: Split sink_crc function in start, stop and read Rodrigo Vivi
2015-07-28 20:10 ` Rafael Antognolli [this message]
2015-07-29 8:24 ` Daniel Vetter
2015-07-30 23:26 ` [PATCH] " Rodrigo Vivi
2015-08-05 8:07 ` Daniel Vetter
2015-08-05 20:30 ` Vivi, Rodrigo
2015-08-06 12:20 ` Daniel Vetter
2015-08-06 23:56 ` Rodrigo Vivi
2015-07-23 23:35 ` [PATCH 5/7] drm/i915: Force sink crc stop before start Rodrigo Vivi
2015-07-28 20:14 ` Rafael Antognolli
2015-07-23 23:35 ` [PATCH 6/7] drm/i915: Save latest known sink CRC to compensate delayed counter reset Rodrigo Vivi
2015-07-28 20:18 ` Rafael Antognolli
2015-07-23 23:35 ` [PATCH 7/7] drm/i915: Dont -ETIMEDOUT on identical new and previous (count, crc) Rodrigo Vivi
2015-07-28 20:25 ` Rafael Antognolli
2015-07-28 22:05 ` Vivi, Rodrigo
2015-07-29 8:26 ` Daniel Vetter
2015-07-29 16:05 ` Rafael Antognolli
2015-07-24 18:19 ` [PATCH 2/7] drm/i915: Try to stop sink crc calculation on error Rafael Antognolli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150728201038.GA5902@intel.com \
--to=rafael.antognolli@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox