From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: "Kamble, Sagar A" <sagar.a.kamble@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 4/5] drm/i915: Use only blitter forcewake
Date: Fri, 11 Sep 2015 17:02:59 +0300 [thread overview]
Message-ID: <20150911140259.GL26517@intel.com> (raw)
In-Reply-To: <55F2DD17.3070800@intel.com>
On Fri, Sep 11, 2015 at 07:24:31PM +0530, Kamble, Sagar A wrote:
>
>
> On 9/11/2015 7:07 PM, Ville Syrjälä wrote:
> > On Sun, Aug 23, 2015 at 05:52:50PM +0530, Sagar Arun Kamble wrote:
> >> Coarse power gating is disabled prior to BXT B0 and till SKL E0,
> >> hence even for render and media well registers blitter forcewake request
> >> need to be used.
> >>
> >> Change-Id: Ibfa8abf02b4d27ca1fcd68fc9e98c2daade7c286
> >> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
> >> ---
> >> drivers/gpu/drm/i915/i915_debugfs.c | 5 +++-
> >> drivers/gpu/drm/i915/i915_drv.h | 1 +
> >> drivers/gpu/drm/i915/intel_uncore.c | 53 ++++++++++++++++++++++++++++++-------
> >> 3 files changed, 48 insertions(+), 11 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> >> index 7a28de5..8eea452 100644
> >> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> >> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> >> @@ -1509,7 +1509,10 @@ static int gen6_drpc_info(struct seq_file *m)
> >> intel_runtime_pm_get(dev_priv);
> >>
> >> spin_lock_irq(&dev_priv->uncore.lock);
> >> - forcewake_count = dev_priv->uncore.fw_domain[FW_DOMAIN_ID_RENDER].wake_count;
> >> + if (use_blitter_forcewake(dev))
> >> + forcewake_count = dev_priv->uncore.fw_domain[FW_DOMAIN_ID_BLITTER].wake_count;
> >> + else
> >> + forcewake_count = dev_priv->uncore.fw_domain[FW_DOMAIN_ID_RENDER].wake_count;
> >> spin_unlock_irq(&dev_priv->uncore.lock);
> >>
> >> if (forcewake_count) {
> >> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> >> index e0f3f05..c127175 100644
> >> --- a/drivers/gpu/drm/i915/i915_drv.h
> >> +++ b/drivers/gpu/drm/i915/i915_drv.h
> >> @@ -2691,6 +2691,7 @@ extern void intel_uncore_check_errors(struct drm_device *dev);
> >> extern void intel_uncore_fini(struct drm_device *dev);
> >> extern void intel_uncore_forcewake_reset(struct drm_device *dev, bool restore);
> >> const char *intel_uncore_forcewake_domain_to_str(const enum forcewake_domain_id id);
> >> +bool use_blitter_forcewake(struct drm_device *dev);
> >> void intel_uncore_forcewake_get(struct drm_i915_private *dev_priv,
> >> enum forcewake_domains domains);
> >> void intel_uncore_forcewake_put(struct drm_i915_private *dev_priv,
> >> diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
> >> index 2df03b1..b7b6612 100644
> >> --- a/drivers/gpu/drm/i915/intel_uncore.c
> >> +++ b/drivers/gpu/drm/i915/intel_uncore.c
> >> @@ -63,6 +63,19 @@ intel_uncore_forcewake_domain_to_str(const enum forcewake_domain_id id)
> >> return "unknown";
> >> }
> >>
> >> +bool use_blitter_forcewake(struct drm_device *dev)
> >> +{
> >> + /*
> >> + * Due to WaRsDisableCoarsePowerGating, Only blitter forcewake need to
> >> + * be used on platforms previous to BXT B0 and until SKL E0.
> >> + */
> > You say only blitter forcewake need be used. OK, but how does that imply
> > that you need to grab the blitter forcewake for render/media wells as
> > well?
> Ok. I need to reword the commit message. Change is to grab blitter fw
> for all register accesses in GT.
Where is that documented BTW? I couldn't find anything solid.
> >
> >> + if ((IS_BROXTON(dev) && (INTEL_REVID(dev) < BXT_REVID_B0)) ||
> >> + (IS_SKYLAKE(dev) && (INTEL_REVID(dev) <= SKL_REVID_E0)))
> >> + return true;
> >> + else
> >> + return false;
> >> +}
> >> +
> >> static void
> >> assert_device_not_suspended(struct drm_i915_private *dev_priv)
> >> {
> >> @@ -129,6 +142,9 @@ fw_domains_get(struct drm_i915_private *dev_priv, enum forcewake_domains fw_doma
> >> struct intel_uncore_forcewake_domain *d;
> >> enum forcewake_domain_id id;
> >>
> >> + WARN_ON(use_blitter_forcewake(dev_priv->dev) &&
> >> + (fw_domains & ~FORCEWAKE_BLITTER));
> >> +
> >> for_each_fw_domain_mask(d, fw_domains, dev_priv, id) {
> >> fw_domain_wait_ack_clear(d);
> >> fw_domain_get(d);
> >> @@ -142,6 +158,9 @@ fw_domains_put(struct drm_i915_private *dev_priv, enum forcewake_domains fw_doma
> >> struct intel_uncore_forcewake_domain *d;
> >> enum forcewake_domain_id id;
> >>
> >> + WARN_ON(use_blitter_forcewake(dev_priv->dev) &&
> >> + (fw_domains & ~FORCEWAKE_BLITTER));
> >> +
> >> for_each_fw_domain_mask(d, fw_domains, dev_priv, id) {
> >> fw_domain_put(d);
> >> fw_domain_posting_read(d);
> >> @@ -313,6 +332,11 @@ void intel_uncore_forcewake_reset(struct drm_device *dev, bool restore)
> >> if (fw)
> >> dev_priv->uncore.funcs.force_wake_put(dev_priv, fw);
> >>
> >> + if (use_blitter_forcewake(dev) && !restore) {
> >> + __raw_i915_write32(dev_priv, FORCEWAKE_RENDER_GEN9, _MASKED_BIT_DISABLE(0xffff));
> >> + __raw_i915_write32(dev_priv, FORCEWAKE_MEDIA_GEN9, _MASKED_BIT_DISABLE(0xffff));
> >> + }
> >> +
> >> fw_domains_reset(dev_priv, FORCEWAKE_ALL);
> >>
> >> if (restore) { /* If reset with a user forcewake, try to restore */
> >> @@ -780,8 +804,11 @@ gen9_read##x(struct drm_i915_private *dev_priv, off_t reg, bool trace) { \
> >> fw_engine = FORCEWAKE_RENDER | FORCEWAKE_MEDIA; \
> >> else \
> >> fw_engine = FORCEWAKE_BLITTER; \
> >> - if (fw_engine) \
> >> + if (fw_engine) { \
> >> + if (use_blitter_forcewake(dev_priv->dev)) \
> >> + fw_engine = FORCEWAKE_BLITTER; \
> >> __force_wake_get(dev_priv, fw_engine); \
> >> + } \
> >> val = __raw_i915_read##x(dev_priv, reg); \
> >> GEN6_READ_FOOTER; \
> >> }
> >> @@ -994,8 +1021,11 @@ gen9_write##x(struct drm_i915_private *dev_priv, off_t reg, u##x val, \
> >> fw_engine = FORCEWAKE_RENDER | FORCEWAKE_MEDIA; \
> >> else \
> >> fw_engine = FORCEWAKE_BLITTER; \
> >> - if (fw_engine) \
> >> + if (fw_engine) { \
> >> + if (use_blitter_forcewake(dev_priv->dev)) \
> >> + fw_engine = FORCEWAKE_BLITTER; \
> >> __force_wake_get(dev_priv, fw_engine); \
> >> + } \
> >> __raw_i915_write##x(dev_priv, reg, val); \
> >> GEN6_WRITE_FOOTER; \
> >> }
> >> @@ -1106,14 +1136,17 @@ static void intel_uncore_fw_domains_init(struct drm_device *dev)
> >> if (IS_GEN9(dev)) {
> >> dev_priv->uncore.funcs.force_wake_get = fw_domains_get;
> >> dev_priv->uncore.funcs.force_wake_put = fw_domains_put;
> >> - fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
> >> - FORCEWAKE_RENDER_GEN9,
> >> - FORCEWAKE_ACK_RENDER_GEN9);
> >> - fw_domain_init(dev_priv, FW_DOMAIN_ID_BLITTER,
> >> - FORCEWAKE_BLITTER_GEN9,
> >> - FORCEWAKE_ACK_BLITTER_GEN9);
> >> - fw_domain_init(dev_priv, FW_DOMAIN_ID_MEDIA,
> >> - FORCEWAKE_MEDIA_GEN9, FORCEWAKE_ACK_MEDIA_GEN9);
> >> + if (!use_blitter_forcewake(dev)) {
> >> + fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
> >> + FORCEWAKE_RENDER_GEN9,
> >> + FORCEWAKE_ACK_RENDER_GEN9);
> >> + fw_domain_init(dev_priv, FW_DOMAIN_ID_MEDIA,
> >> + FORCEWAKE_MEDIA_GEN9,
> >> + FORCEWAKE_ACK_MEDIA_GEN9);
> >> + }
> >> + fw_domain_init(dev_priv, FW_DOMAIN_ID_BLITTER,
> >> + FORCEWAKE_BLITTER_GEN9,
> >> + FORCEWAKE_ACK_BLITTER_GEN9);
> >> } else if (IS_VALLEYVIEW(dev)) {
> >> dev_priv->uncore.funcs.force_wake_get = fw_domains_get;
> >> if (!IS_CHERRYVIEW(dev))
> >> --
> >> 1.9.1
> >>
> >> _______________________________________________
> >> Intel-gfx mailing list
> >> Intel-gfx@lists.freedesktop.org
> >> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-09-11 14:03 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-23 12:22 [PATCH 0/5] RC6/Forcewake/Turbo related changes for Gen9 Sagar Arun Kamble
2015-08-23 12:22 ` [PATCH 1/5] drm/i915: Increase maximum polling time to 50ms for forcewake request/clear ack Sagar Arun Kamble
2015-08-26 9:26 ` Daniel Vetter
2015-09-22 9:06 ` Tvrtko Ursulin
2015-09-22 9:15 ` Chris Wilson
2015-09-22 9:48 ` Tvrtko Ursulin
2015-09-21 16:43 ` Yu Dai
2015-09-23 8:04 ` Daniel Vetter
2015-08-23 12:22 ` [PATCH 2/5] drm/i915/bxt: WaGsvDisableTurbo Sagar Arun Kamble
2015-09-11 6:23 ` Kamble, Sagar A
2015-09-11 12:24 ` Kamble, Sagar A
2015-09-21 16:43 ` Yu Dai
2015-09-23 7:46 ` Daniel Vetter
2015-08-23 12:22 ` [PATCH 3/5] drm/i915: WaRsDisableCoarsePowerGating Sagar Arun Kamble
2015-09-11 6:22 ` Kamble, Sagar A
2015-09-11 9:11 ` [PATCH 1/2] drm/i915: Add IS_SKL_GT3 and IS_SKL_GT4 macro Sagar Arun Kamble
2015-09-11 9:11 ` [PATCH 2/2] drm/i915: WaRsDisableCoarsePowerGating Sagar Arun Kamble
2015-09-11 11:46 ` [PATCH v2 1/1] " Sagar Arun Kamble
2015-09-21 16:43 ` [PATCH 3/5] " Yu Dai
2015-09-23 7:47 ` Daniel Vetter
2015-08-23 12:22 ` [PATCH 4/5] drm/i915: Use only blitter forcewake Sagar Arun Kamble
2015-08-23 12:30 ` Chris Wilson
2015-09-11 13:23 ` Kamble, Sagar A
2015-09-11 13:37 ` Ville Syrjälä
2015-09-11 13:54 ` Kamble, Sagar A
2015-09-11 14:02 ` Ville Syrjälä [this message]
2015-09-12 18:15 ` Kamble, Sagar A
2015-08-23 12:22 ` [PATCH 5/5] drm/i915: Notify Coarse Power Gating changes to GuC Sagar Arun Kamble
2015-08-27 19:55 ` O'Rourke, Tom
2015-09-11 6:16 ` Kamble, Sagar A
2015-09-11 17:17 ` Yu Dai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150911140259.GL26517@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=sagar.a.kamble@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox