From: Daniel Vetter <daniel@ffwll.ch>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 5/5] drm/i915: skip modeset if compatible for everyone.
Date: Mon, 14 Sep 2015 10:08:03 +0200 [thread overview]
Message-ID: <20150914080803.GG3383@phenom.ffwll.local> (raw)
In-Reply-To: <55F1DA95.20701@virtuousgeek.org>
On Thu, Sep 10, 2015 at 12:31:33PM -0700, Jesse Barnes wrote:
> On 08/27/2015 06:44 AM, Maarten Lankhorst wrote:
> > This is done as a separate commit, to make it easier to revert
> > when things break.
> >
> > Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_drv.h | 1 -
> > drivers/gpu/drm/i915/i915_params.c | 5 -----
> > drivers/gpu/drm/i915/intel_display.c | 3 +--
> > 3 files changed, 1 insertion(+), 8 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index 61244455347f..c75d343ff26b 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -2628,7 +2628,6 @@ struct i915_params {
> > int enable_cmd_parser;
> > /* leave bools at the end to not create holes */
> > bool enable_hangcheck;
> > - bool fastboot;
> > bool prefault_disable;
> > bool load_detect_test;
> > bool reset;
> > diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
> > index 5ae4b0aba564..47d41da9d942 100644
> > --- a/drivers/gpu/drm/i915/i915_params.c
> > +++ b/drivers/gpu/drm/i915/i915_params.c
> > @@ -40,7 +40,6 @@ struct i915_params i915 __read_mostly = {
> > .preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),
> > .disable_power_well = 1,
> > .enable_ips = 1,
> > - .fastboot = 0,
> > .prefault_disable = 0,
> > .load_detect_test = 0,
> > .reset = true,
> > @@ -132,10 +131,6 @@ MODULE_PARM_DESC(disable_power_well,
> > module_param_named(enable_ips, i915.enable_ips, int, 0600);
> > MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
> >
> > -module_param_named(fastboot, i915.fastboot, bool, 0600);
> > -MODULE_PARM_DESC(fastboot,
> > - "Try to skip unnecessary mode sets at boot time (default: false)");
> > -
> > module_param_named_unsafe(prefault_disable, i915.prefault_disable, bool, 0600);
> > MODULE_PARM_DESC(prefault_disable,
> > "Disable page prefaulting for pread/pwrite/reloc (default:false). "
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index d3874a68cdb9..b4fb5dec2e38 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -13035,8 +13035,7 @@ static int intel_atomic_check(struct drm_device *dev,
> > if (ret)
> > return ret;
> >
> > - if (i915.fastboot &&
> > - intel_pipe_config_compare(state->dev,
> > + if (intel_pipe_config_compare(state->dev,
> > to_intel_crtc_state(crtc->state),
> > pipe_config, true)) {
> > crtc_state->mode_changed = false;
> >
>
> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Entire series applied, thanks for patches&review.
> Now we just need to test it everywhere...
On that topic: The igt testcase for this is still mia. There's a JIRA for
it, but atm JIRA is down :( Main gist that I think we need to check is
fast modesets between different upscaled and native versions. Later on we
can extend it (e.g. for userspace-controlled DRRS I want to use this same
fast modeset infrastructure here too).
Who's going to do that testcase?
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2015-09-14 8:05 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-27 13:44 [PATCH v2 0/5] Faster modeset support Maarten Lankhorst
2015-08-27 13:44 ` [PATCH v2 1/5] drm/i915: Set csc coefficients in update_pipe_size Maarten Lankhorst
2015-09-10 19:25 ` Jesse Barnes
2015-09-10 19:27 ` Jesse Barnes
2015-08-27 13:44 ` [PATCH v2 2/5] drm/i915: Remove references to crtc->active from intel_fbdev.c Maarten Lankhorst
2015-09-10 19:26 ` Jesse Barnes
2015-08-27 13:44 ` [PATCH v2 3/5] drm/i915: Always try to inherit the initial fb Maarten Lankhorst
2015-09-10 19:26 ` Jesse Barnes
2015-08-27 13:44 ` [PATCH v2 4/5] drm/i915: Make updating pipe without modeset atomic Maarten Lankhorst
2015-08-27 13:58 ` Ville Syrjälä
2015-08-27 14:06 ` Maarten Lankhorst
2015-08-27 14:33 ` Ville Syrjälä
2015-09-10 19:31 ` Jesse Barnes
2015-09-14 8:05 ` Daniel Vetter
2015-08-27 13:44 ` [PATCH v2 5/5] drm/i915: skip modeset if compatible for everyone Maarten Lankhorst
2015-08-29 23:57 ` shuang.he
2015-09-10 19:31 ` Jesse Barnes
2015-09-14 8:08 ` Daniel Vetter [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150914080803.GG3383@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jbarnes@virtuousgeek.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox