From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v8 2/2] drm/dp: Set aux.dev to the drm_connector device, instead of drm_device.
Date: Tue, 24 Nov 2015 22:31:41 +0200 [thread overview]
Message-ID: <20151124203141.GL4437@intel.com> (raw)
In-Reply-To: <1446496428-12135-3-git-send-email-rafael.antognolli@intel.com>
On Mon, Nov 02, 2015 at 12:33:48PM -0800, Rafael Antognolli wrote:
> So far, the i915 driver and some other drivers set it to the drm_device,
> which doesn't allow one to know which DP a given aux channel is related
> to. Changing this to be the drm_connector provides proper nesting, still
> allowing one to get the drm_device from it. Some drivers already set it
> to the drm_connector.
>
> This also removes the need to add a sysfs link for the i2c device under
> the connector, as it will already be there.
>
> Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
I gave aux_dev a bit of a testing here, and it appaers to work quite
splendidly.
This patch however causes lots of WARN spew if I unload the driver
while in middle of dumping the DPCD via the aux_dev. It appears we
we clean up things the wrong order now.
> ---
> drivers/gpu/drm/i915/intel_dp.c | 19 ++-----------------
> 1 file changed, 2 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 8287df4..7aacc08 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1078,36 +1078,21 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
> intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
>
> intel_dp->aux.name = name;
> - intel_dp->aux.dev = dev->dev;
> + intel_dp->aux.dev = connector->base.kdev;
> intel_dp->aux.transfer = intel_dp_aux_transfer;
>
> DRM_DEBUG_KMS("registering %s bus for %s\n", name,
> connector->base.kdev->kobj.name);
>
> ret = drm_dp_aux_register(&intel_dp->aux);
> - if (ret < 0) {
> + if (ret < 0)
> DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n",
> name, ret);
> - return;
> - }
> -
> - ret = sysfs_create_link(&connector->base.kdev->kobj,
> - &intel_dp->aux.ddc.dev.kobj,
> - intel_dp->aux.ddc.dev.kobj.name);
> - if (ret < 0) {
> - DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name, ret);
> - drm_dp_aux_unregister(&intel_dp->aux);
> - }
> }
>
> static void
> intel_dp_connector_unregister(struct intel_connector *intel_connector)
> {
> - struct intel_dp *intel_dp = intel_attached_dp(&intel_connector->base);
> -
> - if (!intel_connector->mst_port)
> - sysfs_remove_link(&intel_connector->base.kdev->kobj,
> - intel_dp->aux.ddc.dev.kobj.name);
> intel_connector_unregister(intel_connector);
> }
>
> --
> 2.4.3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-11-24 20:31 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-02 20:33 [PATCH v8 0/2] Add drm_dp_aux chardev support Rafael Antognolli
2015-11-02 20:33 ` [PATCH v8 1/2] drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers Rafael Antognolli
2015-11-24 20:28 ` Ville Syrjälä
2015-11-25 13:02 ` [Intel-gfx] " Ville Syrjälä
2015-11-02 20:33 ` [PATCH v8 2/2] drm/dp: Set aux.dev to the drm_connector device, instead of drm_device Rafael Antognolli
2015-11-24 20:31 ` Ville Syrjälä [this message]
2015-12-02 0:37 ` Rafael Antognolli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151124203141.GL4437@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rafael.antognolli@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox