public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Matt Roper <matthew.d.roper@intel.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 0/9] Wrap up ILK-style atomic watermarks
Date: Wed, 25 Nov 2015 09:04:11 -0800	[thread overview]
Message-ID: <20151125170411.GD23476@intel.com> (raw)
In-Reply-To: <20151125170011.GR4437@intel.com>

On Wed, Nov 25, 2015 at 07:00:11PM +0200, Ville Syrjälä wrote:
> On Wed, Nov 25, 2015 at 08:48:26AM -0800, Matt Roper wrote:
> > We've been chasing a regression[1] that prevented us from merging the last
> > couple patches of the ILK-style atomic watermark series.  We've finally
> > identified the culprit --- if we fail to reconstruct the BIOS FB, our internal
> > driver state was left in an inconsistent state which caused confusion for the
> > watermark code.  Here's a series that collects that fix (along with a couple
> > other bugfixes that were found while debugging), a few debugging enhancements,
> > and the completion of the ILK atomic watermark series.
> > 
> >  * The first patch in this series addresses that issue and
> >    ensures that we cleanly turn off the primary plane if we're unable to inherit
> >    the framebuffer.  
> >  * Patches 2-4 just clarify/expand some of the information dumped by the
> >    driver while debugging.
> >  * Patches 5 and 6 fix two additional bugs that were discovered while
> >    searching for the cause of the regression.
> >  * Patch 7 just adds some extra paranoia and invariant checking to the
> >    watermark code.
> >  * Patches 8 and 9 are the two final patches from the original atomic watermark
> >    series; with the fixes earlier in the series, we've confirmed that they no
> >    longer cause regressions on Jani's machine.
> > 
> > [1] http://lists.freedesktop.org/archives/intel-gfx/2015-October/077113.html
> 
> Quickly skimmed through the series to see if there was a fix to
> the "merging optimal wms instead of merging active wms like we
> should" bug we have in the current code right now. Nothing
> relevant caught my eye at least.

I'm not sure I'm aware of this problem; is there a bugzilla or mailing
list thread that describes the issue?


Matt

> 
> > 
> > Matt Roper (9):
> >   drm/i915: Disable primary plane if we fail to reconstruct BIOS fb
> >   drm/i915: Dump in-flight plane state while dumping in-flight CRTC
> >     state
> >   drm/i915: Clarify plane state during CRTC state dumps (v2)
> >   drm/i915: Dump pipe config after initial FB is reconstructed
> >   drm/i915: Setup clipped src/dest coordinates during FB reconstruction
> >     (v2)
> >   drm/i915: Convert hsw_compute_linetime_wm to use in-flight state
> >   drm/i915: Add extra paranoia to ILK watermark calculations
> >   drm/i915: Sanitize watermarks after hardware state readout (v2)
> >   drm/i915: Add two-stage ILK-style watermark programming (v7)
> > 
> >  drivers/gpu/drm/drm_atomic_helper.c  |   1 +
> >  drivers/gpu/drm/i915/i915_drv.h      |   5 +
> >  drivers/gpu/drm/i915/intel_atomic.c  |   1 +
> >  drivers/gpu/drm/i915/intel_display.c | 195 +++++++++++++++++++++++++++++++++--
> >  drivers/gpu/drm/i915/intel_drv.h     |  31 +++++-
> >  drivers/gpu/drm/i915/intel_pm.c      | 186 ++++++++++++++++++++++++---------
> >  6 files changed, 359 insertions(+), 60 deletions(-)
> > 
> > -- 
> > 2.1.4
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Ville Syrjälä
> Intel OTC

-- 
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-11-25 17:04 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-25 16:48 [PATCH 0/9] Wrap up ILK-style atomic watermarks Matt Roper
2015-11-25 16:48 ` [PATCH 1/9] drm/i915: Disable primary plane if we fail to reconstruct BIOS fb Matt Roper
2015-12-03 11:40   ` Maarten Lankhorst
2015-11-25 16:48 ` [PATCH 2/9] drm/i915: Dump in-flight plane state while dumping in-flight CRTC state Matt Roper
2015-12-03 12:27   ` Maarten Lankhorst
2015-12-04  9:31     ` Daniel Vetter
2015-11-25 16:48 ` [PATCH 3/9] drm/i915: Clarify plane state during CRTC state dumps (v2) Matt Roper
2015-12-03 12:28   ` Maarten Lankhorst
2015-11-25 16:48 ` [PATCH 4/9] drm/i915: Dump pipe config after initial FB is reconstructed Matt Roper
2015-12-03 12:29   ` Maarten Lankhorst
2015-11-25 16:48 ` [PATCH 5/9] drm/i915: Setup clipped src/dest coordinates during FB reconstruction (v2) Matt Roper
2015-12-03 12:06   ` Maarten Lankhorst
2015-12-03 17:08     ` Matt Roper
2015-11-25 16:48 ` [PATCH 6/9] drm/i915: Convert hsw_compute_linetime_wm to use in-flight state Matt Roper
2015-11-25 16:48 ` [PATCH 7/9] drm/i915: Add extra paranoia to ILK watermark calculations Matt Roper
2015-11-25 16:48 ` [PATCH 8/9] drm/i915: Sanitize watermarks after hardware state readout (v2) Matt Roper
2015-11-25 17:05   ` Ville Syrjälä
2015-11-30 23:56     ` [PATCH] drm/i915: Sanitize watermarks after hardware state readout (v3) Matt Roper
2015-12-01  7:42       ` Maarten Lankhorst
2015-11-30  9:50   ` [PATCH 8/9] drm/i915: Sanitize watermarks after hardware state readout (v2) Maarten Lankhorst
2015-11-30 23:09     ` Matt Roper
2015-11-30 23:22     ` [PATCH] drm/atomic-helper: Grab connection_mutex while duplicating state Matt Roper
2015-12-01  7:24       ` Daniel Vetter
2015-12-01  7:37       ` Maarten Lankhorst
2015-11-25 16:48 ` [PATCH 9/9] drm/i915: Add two-stage ILK-style watermark programming (v7) Matt Roper
2015-11-25 17:08   ` Ville Syrjälä
2015-12-01  0:08     ` Matt Roper
2015-11-25 17:00 ` [PATCH 0/9] Wrap up ILK-style atomic watermarks Ville Syrjälä
2015-11-25 17:04   ` Matt Roper [this message]
2015-11-25 17:14     ` Ville Syrjälä

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151125170411.GD23476@intel.com \
    --to=matthew.d.roper@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox