From: Daniel Vetter <daniel@ffwll.ch>
To: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v9 1/3] drm/kms_helper: Add a common place to call init and exit functions.
Date: Fri, 4 Dec 2015 09:33:35 +0100 [thread overview]
Message-ID: <20151204083335.GE10243@phenom.ffwll.local> (raw)
In-Reply-To: <1449183242-2608-2-git-send-email-rafael.antognolli@intel.com>
On Thu, Dec 03, 2015 at 02:54:00PM -0800, Rafael Antognolli wrote:
> The module_init and module_exit functions will start here, and call the
> subsequent init's and exit's.
>
> Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
> ---
> drivers/gpu/drm/Makefile | 4 ++-
> drivers/gpu/drm/drm_fb_helper.c | 9 +++----
> drivers/gpu/drm/drm_kms_helper_common.c | 43 +++++++++++++++++++++++++++++++++
> include/drm/drm_fb_helper.h | 6 +++++
> 4 files changed, 56 insertions(+), 6 deletions(-)
> create mode 100644 drivers/gpu/drm/drm_kms_helper_common.c
>
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 1e9ff4c..76399da 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -24,7 +24,9 @@ drm-$(CONFIG_AGP) += drm_agpsupport.o
> drm-y += $(drm-m)
>
> drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
> - drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o
> + drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \
> + drm_kms_helper_common.o
> +
> drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
> drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o
> drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o
> diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
> index 69cbab5..576f769 100644
> --- a/drivers/gpu/drm/drm_fb_helper.c
> +++ b/drivers/gpu/drm/drm_fb_helper.c
> @@ -2175,9 +2175,9 @@ EXPORT_SYMBOL(drm_fb_helper_hotplug_event);
> * but the module doesn't depend on any fb console symbols. At least
> * attempt to load fbcon to avoid leaving the system without a usable console.
> */
> -#if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EXPERT)
> -static int __init drm_fb_helper_modinit(void)
> +int drm_fb_helper_modinit(void)
> {
> +#if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EXPERT)
> const char *name = "fbcon";
> struct module *fbcon;
>
> @@ -2187,8 +2187,7 @@ static int __init drm_fb_helper_modinit(void)
>
> if (!fbcon)
> request_module_nowait(name);
> +#endif
> return 0;
> }
> -
> -module_init(drm_fb_helper_modinit);
> -#endif
> +EXPORT_SYMBOL(drm_fb_helper_modinit);
> diff --git a/drivers/gpu/drm/drm_kms_helper_common.c b/drivers/gpu/drm/drm_kms_helper_common.c
> new file mode 100644
> index 0000000..920b2fb
> --- /dev/null
> +++ b/drivers/gpu/drm/drm_kms_helper_common.c
> @@ -0,0 +1,43 @@
> +/*
> + * Copyright © 2015 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + * Authors:
> + * Rafael Antognolli <rafael.antognolli@intel.com>
> + *
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_fb_helper.h>
> +
> +static int __init drm_kms_helper_init(void)
> +{
> + /* Call init functions from specific kms helpers here */
> + return drm_fb_helper_modinit();
> +}
> +
> +static void __exit drm_kms_helper_exit(void)
> +{
> + /* Call exit functions from specific kms helpers here */
> +}
> +
> +module_init(drm_kms_helper_init);
> +module_exit(drm_kms_helper_exit);
If you do a new file please move all the other module metadata in here too
(MODULE_* macros mostly).
Thanks, Daniel
> diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
> index 87b090c..4fed7a2 100644
> --- a/include/drm/drm_fb_helper.h
> +++ b/include/drm/drm_fb_helper.h
> @@ -148,6 +148,7 @@ struct drm_fb_helper {
> };
>
> #ifdef CONFIG_DRM_FBDEV_EMULATION
> +int drm_fb_helper_modinit(void);
> void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper,
> const struct drm_fb_helper_funcs *funcs);
> int drm_fb_helper_init(struct drm_device *dev,
> @@ -212,6 +213,11 @@ int drm_fb_helper_add_one_connector(struct drm_fb_helper *fb_helper, struct drm_
> int drm_fb_helper_remove_one_connector(struct drm_fb_helper *fb_helper,
> struct drm_connector *connector);
> #else
> +static inline int drm_fb_helper_modinit(void)
> +{
> + return 0;
> +}
> +
> static inline void drm_fb_helper_prepare(struct drm_device *dev,
> struct drm_fb_helper *helper,
> const struct drm_fb_helper_funcs *funcs)
> --
> 2.4.3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-12-04 8:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-03 22:53 [PATCH v9 0/3] Add drm_dp_aux chardev support Rafael Antognolli
2015-12-03 22:54 ` [PATCH v9 1/3] drm/kms_helper: Add a common place to call init and exit functions Rafael Antognolli
2015-12-04 8:33 ` Daniel Vetter [this message]
2015-12-06 16:24 ` Lukas Wunner
2015-12-03 22:54 ` [PATCH v9 2/3] drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers Rafael Antognolli
2015-12-03 22:54 ` [PATCH v9 3/3] drm/dp: Set aux.dev to the drm_connector device, instead of drm_device Rafael Antognolli
2015-12-06 16:08 ` Lukas Wunner
2016-01-21 23:13 ` Rafael Antognolli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151204083335.GE10243@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rafael.antognolli@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox