* bisected: i915 modeset broken in ac9b8236551d1177fd07b56aef9b565d1864420d
@ 2015-12-14 13:31 Meelis Roos
2015-12-14 15:08 ` Ville Syrjälä
0 siblings, 1 reply; 6+ messages in thread
From: Meelis Roos @ 2015-12-14 13:31 UTC (permalink / raw)
To: Ville Syrjälä; +Cc: Jani Nikula, dri-devel, Daniel Vetter, intel-gfx
Between 4.4-rc3 and 4.4-rc4, i915 modesetting broke on my i5-2400 PC.
Instead of seeing the new dense graphics mode, I see the last VGA text
lines and no X appears either.
I saw something similar on I865G but have not had time to check if it is
the same issue.
ac9b8236551d1177fd07b56aef9b565d1864420d is the first bad commit
commit ac9b8236551d1177fd07b56aef9b565d1864420d
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri Nov 27 18:55:26 2015 +0200
drm/i915: Introduce a gmbus power domain
Currently the gmbus code uses intel_aux_display_runtime_get/put in an
effort to make sure the hardware is powered up sufficiently for gmbus.
That function only takes the runtime PM reference which on VLV/CHV/BXT
is not enough. We need the disp2d/pipe-a well on VLV/CHV and power well
2 on BXT. So add a new power domnain for gmbus and kill off the now
unused intel_aux_display_runtime_get/put. And change
intel_hdmi_set_edid() to use the gmbus power domain too since that's all
we need there.
Also toss in a BUILD_BUG_ON() to catch problems if we run out of
bits for power domains. We're already really close to the limit...
[Patrik: Add gmbus string to debugfs output]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
[Cherry-picked from drm-intel-next-queued f0ab43e6 (Imre)]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448643329-18675-3-git-send-email-imre.deak@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
:040000 040000 39379146d7e6dda8a4d5f8781ee3d307cce8c47e f4f09fae0485ad6263d31d425296fa9cd7de343b M drivers
--
Meelis Roos (mroos@linux.ee)
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: bisected: i915 modeset broken in ac9b8236551d1177fd07b56aef9b565d1864420d 2015-12-14 13:31 bisected: i915 modeset broken in ac9b8236551d1177fd07b56aef9b565d1864420d Meelis Roos @ 2015-12-14 15:08 ` Ville Syrjälä 2016-01-06 15:41 ` Meelis Roos 0 siblings, 1 reply; 6+ messages in thread From: Ville Syrjälä @ 2015-12-14 15:08 UTC (permalink / raw) To: Meelis Roos Cc: Jani Nikula, dri-devel, David Airlie, Daniel Vetter, intel-gfx On Mon, Dec 14, 2015 at 03:31:09PM +0200, Meelis Roos wrote: > Between 4.4-rc3 and 4.4-rc4, i915 modesetting broke on my i5-2400 PC. That would seem to be SNB. > Instead of seeing the new dense graphics mode, I see the last VGA text > lines and no X appears either. That's a bit weird. SNB has no power power wells, so only runtime PM could be a factor, but it should not kick in that fast during boot even if you enable it before loading the driver since we set the delay to 10 seconds. And in any case the commit you list shouldn't really change anything for SNB. We used to grab a rpm reference for gmbus via intel_aux_display_runtime_get() and now we get it via the GMBUS power domain instead. I would be more tempted to blame the live status check, except it was already included in 4.4-rc1 I think. We didn't have a power well reference for it until commit 0f5a9be15797 ("drm/i915: take a power domain reference while checking the HDMI live status") but that's already in v4.4-rc4. In any case the live status check was already reported to cause failures (at least on some SNB IIRC). There have been attempts to remedy it since: http://lists.freedesktop.org/archives/intel-gfx/2015-December/082689.html http://lists.freedesktop.org/archives/intel-gfx/2015-December/082932.html So this bisect result is somewhat mysterious. A full dmesg with drm.debug=0xe with and without the offending patch reverted would be helpful. And might be best to attach those into a bug report (https://bugs.freedesktop.org/ -> DRI -> DRM/Intel) so that we don't lose track of them. Oh, are we even talking about HDMI/DVI here, or something else? > > I saw something similar on I865G but have not had time to check if it is > the same issue. > > ac9b8236551d1177fd07b56aef9b565d1864420d is the first bad commit > commit ac9b8236551d1177fd07b56aef9b565d1864420d > Author: Ville Syrjälä <ville.syrjala@linux.intel.com> > Date: Fri Nov 27 18:55:26 2015 +0200 > > drm/i915: Introduce a gmbus power domain > > Currently the gmbus code uses intel_aux_display_runtime_get/put in an > effort to make sure the hardware is powered up sufficiently for gmbus. > That function only takes the runtime PM reference which on VLV/CHV/BXT > is not enough. We need the disp2d/pipe-a well on VLV/CHV and power well > 2 on BXT. So add a new power domnain for gmbus and kill off the now > unused intel_aux_display_runtime_get/put. And change > intel_hdmi_set_edid() to use the gmbus power domain too since that's all > we need there. > > Also toss in a BUILD_BUG_ON() to catch problems if we run out of > bits for power domains. We're already really close to the limit... > > [Patrik: Add gmbus string to debugfs output] > > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> > Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> > [Cherry-picked from drm-intel-next-queued f0ab43e6 (Imre)] > Signed-off-by: Imre Deak <imre.deak@intel.com> > Link: http://patchwork.freedesktop.org/patch/msgid/1448643329-18675-3-git-send-email-imre.deak@intel.com > Signed-off-by: Jani Nikula <jani.nikula@intel.com> > > :040000 040000 39379146d7e6dda8a4d5f8781ee3d307cce8c47e f4f09fae0485ad6263d31d425296fa9cd7de343b M drivers > > > -- > Meelis Roos (mroos@linux.ee) -- Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: bisected: i915 modeset broken in ac9b8236551d1177fd07b56aef9b565d1864420d 2015-12-14 15:08 ` Ville Syrjälä @ 2016-01-06 15:41 ` Meelis Roos 2016-01-07 8:52 ` Jani Nikula 0 siblings, 1 reply; 6+ messages in thread From: Meelis Roos @ 2016-01-06 15:41 UTC (permalink / raw) To: Ville Syrjälä; +Cc: Jani Nikula, dri-devel, Daniel Vetter, intel-gfx > On Mon, Dec 14, 2015 at 03:31:09PM +0200, Meelis Roos wrote: > > Between 4.4-rc3 and 4.4-rc4, i915 modesetting broke on my i5-2400 PC. > > That would seem to be SNB. Yes. > > Instead of seeing the new dense graphics mode, I see the last VGA text > > lines and no X appears either. > > That's a bit weird. SNB has no power power wells, so only runtime PM > could be a factor, but it should not kick in that fast during boot even > if you enable it before loading the driver since we set the delay to 10 > seconds. > > And in any case the commit you list shouldn't really change anything > for SNB. We used to grab a rpm reference for gmbus via > intel_aux_display_runtime_get() and now we get it via the GMBUS power > domain instead. I captured dmesg from failing boot, from system logs. gmbus has something to do with it: [drm:i915_dump_device_info] i915 device info: gen=6, pciid=0x0102 rev=0x09 flags=need_gfx_hws,has_fbc,has_hotplug,has_llc, [drm:intel_detect_pch] Found CougarPoint PCH [drm] Memory usable by graphics device = 2048M [drm:i915_gem_gtt_init] GMADR size = 256M [drm:i915_gem_gtt_init] GTT stolen size = 32M [drm:i915_gem_gtt_init] ppgtt mode: 1 [drm] Replacing VGA console driver Console: switching to colour dummy device 80x25 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81519c74>] __mutex_lock_slowpath+0x74/0x100 PGD 0 Oops: 0002 [#1] SMP Modules linked in: i915(+) x86_pkg_temp_thermal kvm_intel kvm irqbypass video crc32c_intel i2c_algo_bit aesni_intel aes_x86_64 glue_helper lrw drm_kms_helper syscopyarea sysfillrect ablk_helper cryptd iTCO_wdt sysimgblt iTCO_vendor_support fb_sys_fops snd_hda_codec_realtek drm psmouse snd_hda_codec_generic e1000e xhci_pci xhci_hcd snd_hda_intel pcspkr snd_hda_codec snd_hwdep snd_hda_core snd_pcm_oss snd_mixer_oss i2c_i801 snd_pcm ehci_pci ehci_hcd nuvoton_cir usbcore snd_timer parport_pc ptp pps_core evdev rc_core parport snd usb_common soundcore tpm_tis tpm floppy lpc_ich mfd_core md_mod w83627ehf hwmon_vid coretemp hwmon eeprom i2c_core loop autofs4 CPU: 0 PID: 390 Comm: systemd-udevd Not tainted 4.4.0-rc2-00006-gac9b823 #185 Hardware name: /DQ67OW, BIOS SWQ6710H.86A.0066.2012.1105.1504 11/05/2012 task: ffff8800b7e48c40 ti: ffff880233420000 task.ti: ffff880233420000 RIP: 0010:[<ffffffff81519c74>] [<ffffffff81519c74>] __mutex_lock_slowpath+0x74/0x100 RSP: 0018:ffff880233423620 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8800b6a594f8 RCX: ffff8800b7e48c40 RDX: 0000000000000001 RSI: ffff8800b7e48c40 RDI: ffff8800b6a594fc RBP: ffff880233423670 R08: 0000000000000000 R09: 0000000000000001 R10: ffff8800b6a507e8 R11: 0000000000000013 R12: ffff8800b7e48c40 R13: ffff8800b6a594fc R14: 00000000ffffffff R15: ffff8800b6a59500 FS: 00007f58846428c0(0000) GS:ffff88023e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000233424000 CR4: 00000000000406f0 Stack: ffff8800b6a59500 0000000000000000 ffff8802353b7148 0000000000000206 ffff8800b6a50000 ffff8800b6a594f8 000000000000001d ffff8800b6a594f8 ffff8800b6a50000 ffff8800b6a50000 00000000fffeea06 ffffffff81519d1b Call Trace: [<ffffffff81519d1b>] ? mutex_lock+0x1b/0x30 [<ffffffffa0423859>] ? intel_display_power_get+0x29/0xe0 [i915] [<ffffffffa04af048>] ? gmbus_xfer+0x38/0x680 [i915] [<ffffffff81073113>] ? try_to_wake_up+0x43/0x320 [<ffffffffa0015cc6>] ? __i2c_transfer+0x106/0x380 [i2c_core] [<ffffffffa0015fad>] ? i2c_transfer+0x6d/0xa0 [i2c_core] [<ffffffffa0016185>] ? i2c_smbus_xfer_emulated+0x105/0x4c0 [i2c_core] [<ffffffff81086f3e>] ? __wake_up_common+0x4e/0x90 [<ffffffff812a7cab>] ? idr_get_empty_slot+0x18b/0x390 [<ffffffffa0016658>] ? i2c_smbus_xfer+0x118/0x2e0 [i2c_core] [<ffffffffa00168e5>] ? i2c_default_probe+0xc5/0x110 [i2c_core] [<ffffffffa00154d9>] ? i2c_check_addr_busy+0x39/0x60 [i2c_core] [<ffffffffa0018339>] ? i2c_do_add_adapter+0x159/0x260 [i2c_core] [<ffffffffa0018440>] ? i2c_do_add_adapter+0x260/0x260 [i2c_core] [<ffffffff81382b85>] ? bus_for_each_drv+0x55/0x90 [<ffffffffa0017fb6>] ? i2c_register_adapter+0x1c6/0x320 [i2c_core] [<ffffffffa04afa80>] ? intel_setup_gmbus+0x220/0x310 [i915] [<ffffffffa04ba1eb>] ? i915_driver_load+0x4eb/0x15e0 [i915] [<ffffffffa026493c>] ? drm_dev_register+0x9c/0xb0 [drm] [<ffffffffa0266c49>] ? drm_get_pci_dev+0x89/0x1d0 [drm] [<ffffffff812d8c71>] ? pci_device_probe+0x81/0xe0 [<ffffffff81384857>] ? driver_probe_device+0x147/0x310 [<ffffffff81384a9b>] ? __driver_attach+0x7b/0x80 [<ffffffff81384a20>] ? driver_probe_device+0x310/0x310 [<ffffffff81382ada>] ? bus_for_each_dev+0x5a/0x90 [<ffffffff81383e34>] ? bus_add_driver+0x1a4/0x220 [<ffffffffa033c000>] ? 0xffffffffa033c000 [<ffffffff813851e7>] ? driver_register+0x57/0xc0 [<ffffffff810003b1>] ? do_one_initcall+0x81/0x1b0 [<ffffffff8116b601>] ? kmem_cache_alloc_trace+0x31/0x120 [<ffffffff8111fb77>] ? do_init_module+0x5b/0x1dc [<ffffffff810c16c2>] ? load_module+0x1e52/0x2220 [<ffffffff810be3b0>] ? __symbol_put+0x50/0x50 [<ffffffff810c1c35>] ? SyS_finit_module+0x85/0x90 [<ffffffff8151b9db>] ? entry_SYSCALL_64_fastpath+0x16/0x6a Code: e8 c2 1a 00 00 8b 03 83 f8 01 0f 84 92 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 64 24 10 eb 19 49 c7 04 24 02 00 00 00 c6 43 04 RIP [<ffffffff81519c74>] __mutex_lock_slowpath+0x74/0x100 RSP <ffff880233423620> CR2: 0000000000000000 ---[ end trace 5e2e7e41ffefe21d ]--- > So this bisect result is somewhat mysterious. A full dmesg with > drm.debug=0xe with and without the offending patch reverted would be > helpful. And might be best to attach those into a bug report > (https://bugs.freedesktop.org/ -> DRI -> DRM/Intel) so that we don't > lose track of them. Full dmesgs at https://bugs.freedesktop.org/show_bug.cgi?id=93608 > > Oh, are we even talking about HDMI/DVI here, or something else? DVI > > > > > I saw something similar on I865G but have not had time to check if it is > > the same issue. > > > > ac9b8236551d1177fd07b56aef9b565d1864420d is the first bad commit > > commit ac9b8236551d1177fd07b56aef9b565d1864420d > > Author: Ville Syrjälä <ville.syrjala@linux.intel.com> > > Date: Fri Nov 27 18:55:26 2015 +0200 > > > > drm/i915: Introduce a gmbus power domain > > > > Currently the gmbus code uses intel_aux_display_runtime_get/put in an > > effort to make sure the hardware is powered up sufficiently for gmbus. > > That function only takes the runtime PM reference which on VLV/CHV/BXT > > is not enough. We need the disp2d/pipe-a well on VLV/CHV and power well > > 2 on BXT. So add a new power domnain for gmbus and kill off the now > > unused intel_aux_display_runtime_get/put. And change > > intel_hdmi_set_edid() to use the gmbus power domain too since that's all > > we need there. > > > > Also toss in a BUILD_BUG_ON() to catch problems if we run out of > > bits for power domains. We're already really close to the limit... > > > > [Patrik: Add gmbus string to debugfs output] > > > > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> > > Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> > > [Cherry-picked from drm-intel-next-queued f0ab43e6 (Imre)] > > Signed-off-by: Imre Deak <imre.deak@intel.com> > > Link: http://patchwork.freedesktop.org/patch/msgid/1448643329-18675-3-git-send-email-imre.deak@intel.com > > Signed-off-by: Jani Nikula <jani.nikula@intel.com> > > > > :040000 040000 39379146d7e6dda8a4d5f8781ee3d307cce8c47e f4f09fae0485ad6263d31d425296fa9cd7de343b M drivers > > > > > > -- > > Meelis Roos (mroos@linux.ee) > > -- Meelis Roos (mroos@linux.ee) _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: bisected: i915 modeset broken in ac9b8236551d1177fd07b56aef9b565d1864420d 2016-01-06 15:41 ` Meelis Roos @ 2016-01-07 8:52 ` Jani Nikula 2016-01-07 10:30 ` Jani Nikula 0 siblings, 1 reply; 6+ messages in thread From: Jani Nikula @ 2016-01-07 8:52 UTC (permalink / raw) To: Meelis Roos, Ville Syrjälä Cc: David Airlie, dri-devel, Daniel Vetter, intel-gfx On Wed, 06 Jan 2016, Meelis Roos <mroos@linux.ee> wrote: >> On Mon, Dec 14, 2015 at 03:31:09PM +0200, Meelis Roos wrote: >> > Between 4.4-rc3 and 4.4-rc4, i915 modesetting broke on my i5-2400 PC. >> >> That would seem to be SNB. > > Yes. > >> > Instead of seeing the new dense graphics mode, I see the last VGA text >> > lines and no X appears either. >> >> That's a bit weird. SNB has no power power wells, so only runtime PM >> could be a factor, but it should not kick in that fast during boot even >> if you enable it before loading the driver since we set the delay to 10 >> seconds. >> >> And in any case the commit you list shouldn't really change anything >> for SNB. We used to grab a rpm reference for gmbus via >> intel_aux_display_runtime_get() and now we get it via the GMBUS power >> domain instead. > > I captured dmesg from failing boot, from system logs. gmbus has > something to do with it: > > [drm:i915_dump_device_info] i915 device info: gen=6, pciid=0x0102 > rev=0x09 flags=need_gfx_hws,has_fbc,has_hotplug,has_llc, > [drm:intel_detect_pch] Found CougarPoint PCH > [drm] Memory usable by graphics device = 2048M > [drm:i915_gem_gtt_init] GMADR size = 256M > [drm:i915_gem_gtt_init] GTT stolen size = 32M > [drm:i915_gem_gtt_init] ppgtt mode: 1 > [drm] Replacing VGA console driver > Console: switching to colour dummy device 80x25 > BUG: unable to handle kernel NULL pointer dereference at (null) > IP: [<ffffffff81519c74>] __mutex_lock_slowpath+0x74/0x100 > PGD 0 > Oops: 0002 [#1] SMP > Modules linked in: i915(+) x86_pkg_temp_thermal kvm_intel kvm irqbypass video crc32c_intel i2c_algo_bit aesni_intel aes_x86_64 glue_helper lrw drm_kms_helper syscopyarea sysfillrect ablk_helper cryptd iTCO_wdt sysimgblt iTCO_vendor_support fb_sys_fops snd_hda_codec_realtek drm psmouse snd_hda_codec_generic e1000e xhci_pci xhci_hcd snd_hda_intel pcspkr snd_hda_codec snd_hwdep snd_hda_core snd_pcm_oss snd_mixer_oss i2c_i801 snd_pcm ehci_pci ehci_hcd nuvoton_cir usbcore snd_timer parport_pc ptp pps_core evdev rc_core parport snd usb_common soundcore tpm_tis tpm floppy lpc_ich mfd_core md_mod w83627ehf hwmon_vid coretemp hwmon eeprom i2c_core loop autofs4 > CPU: 0 PID: 390 Comm: systemd-udevd Not tainted 4.4.0-rc2-00006-gac9b823 #185 > Hardware name: /DQ67OW, BIOS SWQ6710H.86A.0066.2012.1105.1504 11/05/2012 > task: ffff8800b7e48c40 ti: ffff880233420000 task.ti: ffff880233420000 > RIP: 0010:[<ffffffff81519c74>] [<ffffffff81519c74>] __mutex_lock_slowpath+0x74/0x100 > RSP: 0018:ffff880233423620 EFLAGS: 00010282 > RAX: 0000000000000000 RBX: ffff8800b6a594f8 RCX: ffff8800b7e48c40 > RDX: 0000000000000001 RSI: ffff8800b7e48c40 RDI: ffff8800b6a594fc > RBP: ffff880233423670 R08: 0000000000000000 R09: 0000000000000001 > R10: ffff8800b6a507e8 R11: 0000000000000013 R12: ffff8800b7e48c40 > R13: ffff8800b6a594fc R14: 00000000ffffffff R15: ffff8800b6a59500 > FS: 00007f58846428c0(0000) GS:ffff88023e200000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 0000000000000000 CR3: 0000000233424000 CR4: 00000000000406f0 > Stack: > ffff8800b6a59500 0000000000000000 ffff8802353b7148 0000000000000206 > ffff8800b6a50000 ffff8800b6a594f8 000000000000001d ffff8800b6a594f8 > ffff8800b6a50000 ffff8800b6a50000 00000000fffeea06 ffffffff81519d1b > Call Trace: > [<ffffffff81519d1b>] ? mutex_lock+0x1b/0x30 > [<ffffffffa0423859>] ? intel_display_power_get+0x29/0xe0 [i915] > [<ffffffffa04af048>] ? gmbus_xfer+0x38/0x680 [i915] > [<ffffffff81073113>] ? try_to_wake_up+0x43/0x320 > [<ffffffffa0015cc6>] ? __i2c_transfer+0x106/0x380 [i2c_core] > [<ffffffffa0015fad>] ? i2c_transfer+0x6d/0xa0 [i2c_core] > [<ffffffffa0016185>] ? i2c_smbus_xfer_emulated+0x105/0x4c0 [i2c_core] > [<ffffffff81086f3e>] ? __wake_up_common+0x4e/0x90 > [<ffffffff812a7cab>] ? idr_get_empty_slot+0x18b/0x390 > [<ffffffffa0016658>] ? i2c_smbus_xfer+0x118/0x2e0 [i2c_core] > [<ffffffffa00168e5>] ? i2c_default_probe+0xc5/0x110 [i2c_core] > [<ffffffffa00154d9>] ? i2c_check_addr_busy+0x39/0x60 [i2c_core] > [<ffffffffa0018339>] ? i2c_do_add_adapter+0x159/0x260 [i2c_core] > [<ffffffffa0018440>] ? i2c_do_add_adapter+0x260/0x260 [i2c_core] > [<ffffffff81382b85>] ? bus_for_each_drv+0x55/0x90 > [<ffffffffa0017fb6>] ? i2c_register_adapter+0x1c6/0x320 [i2c_core] > [<ffffffffa04afa80>] ? intel_setup_gmbus+0x220/0x310 [i915] intel_setup_gmbus registers the i2c adapters, which does transfers on the i2c bus on probe, and this happens before intel_power_domains_init which initializes the power domain lock. The bisect and backtrace make sense and are not mysterious at all. Not sure of the fix though, are we better off changing the init order, or making sure the probes don't happen or don't screw us up. BR, Jani. > [<ffffffffa04ba1eb>] ? i915_driver_load+0x4eb/0x15e0 [i915] > [<ffffffffa026493c>] ? drm_dev_register+0x9c/0xb0 [drm] > [<ffffffffa0266c49>] ? drm_get_pci_dev+0x89/0x1d0 [drm] > [<ffffffff812d8c71>] ? pci_device_probe+0x81/0xe0 > [<ffffffff81384857>] ? driver_probe_device+0x147/0x310 > [<ffffffff81384a9b>] ? __driver_attach+0x7b/0x80 > [<ffffffff81384a20>] ? driver_probe_device+0x310/0x310 > [<ffffffff81382ada>] ? bus_for_each_dev+0x5a/0x90 > [<ffffffff81383e34>] ? bus_add_driver+0x1a4/0x220 > [<ffffffffa033c000>] ? 0xffffffffa033c000 > [<ffffffff813851e7>] ? driver_register+0x57/0xc0 > [<ffffffff810003b1>] ? do_one_initcall+0x81/0x1b0 > [<ffffffff8116b601>] ? kmem_cache_alloc_trace+0x31/0x120 > [<ffffffff8111fb77>] ? do_init_module+0x5b/0x1dc > [<ffffffff810c16c2>] ? load_module+0x1e52/0x2220 > [<ffffffff810be3b0>] ? __symbol_put+0x50/0x50 > [<ffffffff810c1c35>] ? SyS_finit_module+0x85/0x90 > [<ffffffff8151b9db>] ? entry_SYSCALL_64_fastpath+0x16/0x6a > Code: e8 c2 1a 00 00 8b 03 83 f8 01 0f 84 92 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 64 24 10 eb 19 49 c7 04 24 02 00 00 00 c6 43 04 > RIP [<ffffffff81519c74>] __mutex_lock_slowpath+0x74/0x100 > RSP <ffff880233423620> > CR2: 0000000000000000 > ---[ end trace 5e2e7e41ffefe21d ]--- > > >> So this bisect result is somewhat mysterious. A full dmesg with >> drm.debug=0xe with and without the offending patch reverted would be >> helpful. And might be best to attach those into a bug report >> (https://bugs.freedesktop.org/ -> DRI -> DRM/Intel) so that we don't >> lose track of them. > > Full dmesgs at https://bugs.freedesktop.org/show_bug.cgi?id=93608 > >> >> Oh, are we even talking about HDMI/DVI here, or something else? > > DVI > >> >> > >> > I saw something similar on I865G but have not had time to check if it is >> > the same issue. >> > >> > ac9b8236551d1177fd07b56aef9b565d1864420d is the first bad commit >> > commit ac9b8236551d1177fd07b56aef9b565d1864420d >> > Author: Ville Syrjälä <ville.syrjala@linux.intel.com> >> > Date: Fri Nov 27 18:55:26 2015 +0200 >> > >> > drm/i915: Introduce a gmbus power domain >> > >> > Currently the gmbus code uses intel_aux_display_runtime_get/put in an >> > effort to make sure the hardware is powered up sufficiently for gmbus. >> > That function only takes the runtime PM reference which on VLV/CHV/BXT >> > is not enough. We need the disp2d/pipe-a well on VLV/CHV and power well >> > 2 on BXT. So add a new power domnain for gmbus and kill off the now >> > unused intel_aux_display_runtime_get/put. And change >> > intel_hdmi_set_edid() to use the gmbus power domain too since that's all >> > we need there. >> > >> > Also toss in a BUILD_BUG_ON() to catch problems if we run out of >> > bits for power domains. We're already really close to the limit... >> > >> > [Patrik: Add gmbus string to debugfs output] >> > >> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> >> > Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> >> > [Cherry-picked from drm-intel-next-queued f0ab43e6 (Imre)] >> > Signed-off-by: Imre Deak <imre.deak@intel.com> >> > Link: http://patchwork.freedesktop.org/patch/msgid/1448643329-18675-3-git-send-email-imre.deak@intel.com >> > Signed-off-by: Jani Nikula <jani.nikula@intel.com> >> > >> > :040000 040000 39379146d7e6dda8a4d5f8781ee3d307cce8c47e f4f09fae0485ad6263d31d425296fa9cd7de343b M drivers >> > >> > >> > -- >> > Meelis Roos (mroos@linux.ee) >> >> -- Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: bisected: i915 modeset broken in ac9b8236551d1177fd07b56aef9b565d1864420d 2016-01-07 8:52 ` Jani Nikula @ 2016-01-07 10:30 ` Jani Nikula 2016-01-07 11:10 ` Meelis Roos 0 siblings, 1 reply; 6+ messages in thread From: Jani Nikula @ 2016-01-07 10:30 UTC (permalink / raw) To: Meelis Roos, Ville Syrjälä Cc: David Airlie, dri-devel, Daniel Vetter, intel-gfx On Thu, 07 Jan 2016, Jani Nikula <jani.nikula@intel.com> wrote: > On Wed, 06 Jan 2016, Meelis Roos <mroos@linux.ee> wrote: >>> On Mon, Dec 14, 2015 at 03:31:09PM +0200, Meelis Roos wrote: >>> > Between 4.4-rc3 and 4.4-rc4, i915 modesetting broke on my i5-2400 PC. >>> >>> That would seem to be SNB. >> >> Yes. >> >>> > Instead of seeing the new dense graphics mode, I see the last VGA text >>> > lines and no X appears either. >>> >>> That's a bit weird. SNB has no power power wells, so only runtime PM >>> could be a factor, but it should not kick in that fast during boot even >>> if you enable it before loading the driver since we set the delay to 10 >>> seconds. >>> >>> And in any case the commit you list shouldn't really change anything >>> for SNB. We used to grab a rpm reference for gmbus via >>> intel_aux_display_runtime_get() and now we get it via the GMBUS power >>> domain instead. >> >> I captured dmesg from failing boot, from system logs. gmbus has >> something to do with it: >> >> [drm:i915_dump_device_info] i915 device info: gen=6, pciid=0x0102 >> rev=0x09 flags=need_gfx_hws,has_fbc,has_hotplug,has_llc, >> [drm:intel_detect_pch] Found CougarPoint PCH >> [drm] Memory usable by graphics device = 2048M >> [drm:i915_gem_gtt_init] GMADR size = 256M >> [drm:i915_gem_gtt_init] GTT stolen size = 32M >> [drm:i915_gem_gtt_init] ppgtt mode: 1 >> [drm] Replacing VGA console driver >> Console: switching to colour dummy device 80x25 >> BUG: unable to handle kernel NULL pointer dereference at (null) >> IP: [<ffffffff81519c74>] __mutex_lock_slowpath+0x74/0x100 >> PGD 0 >> Oops: 0002 [#1] SMP >> Modules linked in: i915(+) x86_pkg_temp_thermal kvm_intel kvm irqbypass video crc32c_intel i2c_algo_bit aesni_intel aes_x86_64 glue_helper lrw drm_kms_helper syscopyarea sysfillrect ablk_helper cryptd iTCO_wdt sysimgblt iTCO_vendor_support fb_sys_fops snd_hda_codec_realtek drm psmouse snd_hda_codec_generic e1000e xhci_pci xhci_hcd snd_hda_intel pcspkr snd_hda_codec snd_hwdep snd_hda_core snd_pcm_oss snd_mixer_oss i2c_i801 snd_pcm ehci_pci ehci_hcd nuvoton_cir usbcore snd_timer parport_pc ptp pps_core evdev rc_core parport snd usb_common soundcore tpm_tis tpm floppy lpc_ich mfd_core md_mod w83627ehf hwmon_vid coretemp hwmon eeprom i2c_core loop autofs4 >> CPU: 0 PID: 390 Comm: systemd-udevd Not tainted 4.4.0-rc2-00006-gac9b823 #185 >> Hardware name: /DQ67OW, BIOS SWQ6710H.86A.0066.2012.1105.1504 11/05/2012 >> task: ffff8800b7e48c40 ti: ffff880233420000 task.ti: ffff880233420000 >> RIP: 0010:[<ffffffff81519c74>] [<ffffffff81519c74>] __mutex_lock_slowpath+0x74/0x100 >> RSP: 0018:ffff880233423620 EFLAGS: 00010282 >> RAX: 0000000000000000 RBX: ffff8800b6a594f8 RCX: ffff8800b7e48c40 >> RDX: 0000000000000001 RSI: ffff8800b7e48c40 RDI: ffff8800b6a594fc >> RBP: ffff880233423670 R08: 0000000000000000 R09: 0000000000000001 >> R10: ffff8800b6a507e8 R11: 0000000000000013 R12: ffff8800b7e48c40 >> R13: ffff8800b6a594fc R14: 00000000ffffffff R15: ffff8800b6a59500 >> FS: 00007f58846428c0(0000) GS:ffff88023e200000(0000) knlGS:0000000000000000 >> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 >> CR2: 0000000000000000 CR3: 0000000233424000 CR4: 00000000000406f0 >> Stack: >> ffff8800b6a59500 0000000000000000 ffff8802353b7148 0000000000000206 >> ffff8800b6a50000 ffff8800b6a594f8 000000000000001d ffff8800b6a594f8 >> ffff8800b6a50000 ffff8800b6a50000 00000000fffeea06 ffffffff81519d1b >> Call Trace: >> [<ffffffff81519d1b>] ? mutex_lock+0x1b/0x30 >> [<ffffffffa0423859>] ? intel_display_power_get+0x29/0xe0 [i915] >> [<ffffffffa04af048>] ? gmbus_xfer+0x38/0x680 [i915] >> [<ffffffff81073113>] ? try_to_wake_up+0x43/0x320 >> [<ffffffffa0015cc6>] ? __i2c_transfer+0x106/0x380 [i2c_core] >> [<ffffffffa0015fad>] ? i2c_transfer+0x6d/0xa0 [i2c_core] >> [<ffffffffa0016185>] ? i2c_smbus_xfer_emulated+0x105/0x4c0 [i2c_core] >> [<ffffffff81086f3e>] ? __wake_up_common+0x4e/0x90 >> [<ffffffff812a7cab>] ? idr_get_empty_slot+0x18b/0x390 >> [<ffffffffa0016658>] ? i2c_smbus_xfer+0x118/0x2e0 [i2c_core] >> [<ffffffffa00168e5>] ? i2c_default_probe+0xc5/0x110 [i2c_core] >> [<ffffffffa00154d9>] ? i2c_check_addr_busy+0x39/0x60 [i2c_core] >> [<ffffffffa0018339>] ? i2c_do_add_adapter+0x159/0x260 [i2c_core] >> [<ffffffffa0018440>] ? i2c_do_add_adapter+0x260/0x260 [i2c_core] >> [<ffffffff81382b85>] ? bus_for_each_drv+0x55/0x90 >> [<ffffffffa0017fb6>] ? i2c_register_adapter+0x1c6/0x320 [i2c_core] >> [<ffffffffa04afa80>] ? intel_setup_gmbus+0x220/0x310 [i915] > > intel_setup_gmbus registers the i2c adapters, which does transfers on > the i2c bus on probe, and this happens before intel_power_domains_init > which initializes the power domain lock. > > The bisect and backtrace make sense and are not mysterious at all. > > Not sure of the fix though, are we better off changing the init order, > or making sure the probes don't happen or don't screw us up. So I started wondering why we are not seeing this. To reproduce, looks like you'll need to have an i2c driver with class I2C_CLASS_DDC for the i2c detect (and the bug) to happen. In tree, the only ones seem to be drivers/misc/eeprom/eeprom.c drivers/staging/olpc_dcon/olpc_dcon.c I presume you have one or the other. No matter what, userspace can access the adapter right away when we register it, so this needs to be fixed along the lines of [1]. BR, Jani. [1] http://patchwork.freedesktop.org/patch/msgid/1452157856-27360-1-git-send-email-daniel.vetter@ffwll.ch > > BR, > Jani. > > > >> [<ffffffffa04ba1eb>] ? i915_driver_load+0x4eb/0x15e0 [i915] >> [<ffffffffa026493c>] ? drm_dev_register+0x9c/0xb0 [drm] >> [<ffffffffa0266c49>] ? drm_get_pci_dev+0x89/0x1d0 [drm] >> [<ffffffff812d8c71>] ? pci_device_probe+0x81/0xe0 >> [<ffffffff81384857>] ? driver_probe_device+0x147/0x310 >> [<ffffffff81384a9b>] ? __driver_attach+0x7b/0x80 >> [<ffffffff81384a20>] ? driver_probe_device+0x310/0x310 >> [<ffffffff81382ada>] ? bus_for_each_dev+0x5a/0x90 >> [<ffffffff81383e34>] ? bus_add_driver+0x1a4/0x220 >> [<ffffffffa033c000>] ? 0xffffffffa033c000 >> [<ffffffff813851e7>] ? driver_register+0x57/0xc0 >> [<ffffffff810003b1>] ? do_one_initcall+0x81/0x1b0 >> [<ffffffff8116b601>] ? kmem_cache_alloc_trace+0x31/0x120 >> [<ffffffff8111fb77>] ? do_init_module+0x5b/0x1dc >> [<ffffffff810c16c2>] ? load_module+0x1e52/0x2220 >> [<ffffffff810be3b0>] ? __symbol_put+0x50/0x50 >> [<ffffffff810c1c35>] ? SyS_finit_module+0x85/0x90 >> [<ffffffff8151b9db>] ? entry_SYSCALL_64_fastpath+0x16/0x6a >> Code: e8 c2 1a 00 00 8b 03 83 f8 01 0f 84 92 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 64 24 10 eb 19 49 c7 04 24 02 00 00 00 c6 43 04 >> RIP [<ffffffff81519c74>] __mutex_lock_slowpath+0x74/0x100 >> RSP <ffff880233423620> >> CR2: 0000000000000000 >> ---[ end trace 5e2e7e41ffefe21d ]--- >> >> >>> So this bisect result is somewhat mysterious. A full dmesg with >>> drm.debug=0xe with and without the offending patch reverted would be >>> helpful. And might be best to attach those into a bug report >>> (https://bugs.freedesktop.org/ -> DRI -> DRM/Intel) so that we don't >>> lose track of them. >> >> Full dmesgs at https://bugs.freedesktop.org/show_bug.cgi?id=93608 >> >>> >>> Oh, are we even talking about HDMI/DVI here, or something else? >> >> DVI >> >>> >>> > >>> > I saw something similar on I865G but have not had time to check if it is >>> > the same issue. >>> > >>> > ac9b8236551d1177fd07b56aef9b565d1864420d is the first bad commit >>> > commit ac9b8236551d1177fd07b56aef9b565d1864420d >>> > Author: Ville Syrjälä <ville.syrjala@linux.intel.com> >>> > Date: Fri Nov 27 18:55:26 2015 +0200 >>> > >>> > drm/i915: Introduce a gmbus power domain >>> > >>> > Currently the gmbus code uses intel_aux_display_runtime_get/put in an >>> > effort to make sure the hardware is powered up sufficiently for gmbus. >>> > That function only takes the runtime PM reference which on VLV/CHV/BXT >>> > is not enough. We need the disp2d/pipe-a well on VLV/CHV and power well >>> > 2 on BXT. So add a new power domnain for gmbus and kill off the now >>> > unused intel_aux_display_runtime_get/put. And change >>> > intel_hdmi_set_edid() to use the gmbus power domain too since that's all >>> > we need there. >>> > >>> > Also toss in a BUILD_BUG_ON() to catch problems if we run out of >>> > bits for power domains. We're already really close to the limit... >>> > >>> > [Patrik: Add gmbus string to debugfs output] >>> > >>> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> >>> > Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> >>> > [Cherry-picked from drm-intel-next-queued f0ab43e6 (Imre)] >>> > Signed-off-by: Imre Deak <imre.deak@intel.com> >>> > Link: http://patchwork.freedesktop.org/patch/msgid/1448643329-18675-3-git-send-email-imre.deak@intel.com >>> > Signed-off-by: Jani Nikula <jani.nikula@intel.com> >>> > >>> > :040000 040000 39379146d7e6dda8a4d5f8781ee3d307cce8c47e f4f09fae0485ad6263d31d425296fa9cd7de343b M drivers >>> > >>> > >>> > -- >>> > Meelis Roos (mroos@linux.ee) >>> >>> -- Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: bisected: i915 modeset broken in ac9b8236551d1177fd07b56aef9b565d1864420d 2016-01-07 10:30 ` Jani Nikula @ 2016-01-07 11:10 ` Meelis Roos 0 siblings, 0 replies; 6+ messages in thread From: Meelis Roos @ 2016-01-07 11:10 UTC (permalink / raw) To: Jani Nikula; +Cc: dri-devel, Daniel Vetter, intel-gfx > > intel_setup_gmbus registers the i2c adapters, which does transfers on > > the i2c bus on probe, and this happens before intel_power_domains_init > > which initializes the power domain lock. > > > > The bisect and backtrace make sense and are not mysterious at all. > > > > Not sure of the fix though, are we better off changing the init order, > > or making sure the probes don't happen or don't screw us up. > > So I started wondering why we are not seeing this. To reproduce, looks > like you'll need to have an i2c driver with class I2C_CLASS_DDC for the > i2c detect (and the bug) to happen. In tree, the only ones seem to be > > drivers/misc/eeprom/eeprom.c Yes, I have that for DIMM SPD information access. > drivers/staging/olpc_dcon/olpc_dcon.c > > I presume you have one or the other. > > No matter what, userspace can access the adapter right away when we > register it, so this needs to be fixed along the lines of [1]. > > BR, > Jani. > > > [1] http://patchwork.freedesktop.org/patch/msgid/1452157856-27360-1-git-send-email-daniel.vetter@ffwll.ch -- Meelis Roos (mroos@linux.ee) _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-01-07 11:10 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-12-14 13:31 bisected: i915 modeset broken in ac9b8236551d1177fd07b56aef9b565d1864420d Meelis Roos 2015-12-14 15:08 ` Ville Syrjälä 2016-01-06 15:41 ` Meelis Roos 2016-01-07 8:52 ` Jani Nikula 2016-01-07 10:30 ` Jani Nikula 2016-01-07 11:10 ` Meelis Roos
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).