* [PATCH] drm/i915/skl: Fix typo in DPLL_CFGCR1 definition
@ 2016-02-04 15:43 Lyude
2016-02-04 16:11 ` Ville Syrjälä
0 siblings, 1 reply; 3+ messages in thread
From: Lyude @ 2016-02-04 15:43 UTC (permalink / raw)
To: Daniel Vetter, Jani Nikula, David Airlie, intel-gfx, dri-devel,
linux-kernel
Cc: Benjamin Tissoires, Lyude, Rob Clark
We accidentally point both cfgcr registers for the second shared DPLL to
the same location in i915_reg.h. This results in a lot of hw pipe state
mismatches whenever we try to do a modeset that requires allocating the
DPLL to a CRTC:
[drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr1 (expected 0x80000168, found 0x000004a5)
[drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 108000, found 49500)
[drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in port_clock (expected 108000, found 49500)
This usually ends up causing blank monitors, since the DPLL never can
get set to the right clock.
Fixes: f0f59a00a1 ("drm/i915: Type safe register read/write")
Signed-off-by: Lyude <cpaul@redhat.com>
---
drivers/gpu/drm/i915/i915_reg.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 007ae83..b9a564b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7514,7 +7514,7 @@ enum skl_disp_power_wells {
#define DPLL_CFGCR2_PDIV_7 (4<<2)
#define DPLL_CFGCR2_CENTRAL_FREQ_MASK (3)
-#define DPLL_CFGCR1(id) _MMIO_PIPE((id) - SKL_DPLL1, _DPLL1_CFGCR1, _DPLL2_CFGCR2)
+#define DPLL_CFGCR1(id) _MMIO_PIPE((id) - SKL_DPLL1, _DPLL1_CFGCR1, _DPLL2_CFGCR1)
#define DPLL_CFGCR2(id) _MMIO_PIPE((id) - SKL_DPLL1, _DPLL1_CFGCR2, _DPLL2_CFGCR2)
/* BXT display engine PLL */
--
2.5.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] drm/i915/skl: Fix typo in DPLL_CFGCR1 definition
2016-02-04 15:43 [PATCH] drm/i915/skl: Fix typo in DPLL_CFGCR1 definition Lyude
@ 2016-02-04 16:11 ` Ville Syrjälä
2016-02-09 9:47 ` Daniel Vetter
0 siblings, 1 reply; 3+ messages in thread
From: Ville Syrjälä @ 2016-02-04 16:11 UTC (permalink / raw)
To: Lyude
Cc: Rob Clark, David Airlie, Benjamin Tissoires, intel-gfx,
linux-kernel, dri-devel, Daniel Vetter
On Thu, Feb 04, 2016 at 10:43:21AM -0500, Lyude wrote:
> We accidentally point both cfgcr registers for the second shared DPLL to
> the same location in i915_reg.h. This results in a lot of hw pipe state
> mismatches whenever we try to do a modeset that requires allocating the
> DPLL to a CRTC:
>
> [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr1 (expected 0x80000168, found 0x000004a5)
> [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 108000, found 49500)
> [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in port_clock (expected 108000, found 49500)
>
> This usually ends up causing blank monitors, since the DPLL never can
> get set to the right clock.
>
> Fixes: f0f59a00a1 ("drm/i915: Type safe register read/write")
Actually
Fixes: 086f8e84a085 ("drm/i915: Prefix raw register defines with underscore")
That's the second regression from the type safety stuff :( I guess we
still don't have enough testing coverage since this has gone undetected
for so long.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Lyude <cpaul@redhat.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 007ae83..b9a564b 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7514,7 +7514,7 @@ enum skl_disp_power_wells {
> #define DPLL_CFGCR2_PDIV_7 (4<<2)
> #define DPLL_CFGCR2_CENTRAL_FREQ_MASK (3)
>
> -#define DPLL_CFGCR1(id) _MMIO_PIPE((id) - SKL_DPLL1, _DPLL1_CFGCR1, _DPLL2_CFGCR2)
> +#define DPLL_CFGCR1(id) _MMIO_PIPE((id) - SKL_DPLL1, _DPLL1_CFGCR1, _DPLL2_CFGCR1)
> #define DPLL_CFGCR2(id) _MMIO_PIPE((id) - SKL_DPLL1, _DPLL1_CFGCR2, _DPLL2_CFGCR2)
>
> /* BXT display engine PLL */
> --
> 2.5.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] drm/i915/skl: Fix typo in DPLL_CFGCR1 definition
2016-02-04 16:11 ` Ville Syrjälä
@ 2016-02-09 9:47 ` Daniel Vetter
0 siblings, 0 replies; 3+ messages in thread
From: Daniel Vetter @ 2016-02-09 9:47 UTC (permalink / raw)
To: Ville Syrjälä
Cc: Rob Clark, David Airlie, Benjamin Tissoires, intel-gfx,
linux-kernel, dri-devel, Daniel Vetter, Lyude
On Thu, Feb 04, 2016 at 06:11:28PM +0200, Ville Syrjälä wrote:
> On Thu, Feb 04, 2016 at 10:43:21AM -0500, Lyude wrote:
> > We accidentally point both cfgcr registers for the second shared DPLL to
> > the same location in i915_reg.h. This results in a lot of hw pipe state
> > mismatches whenever we try to do a modeset that requires allocating the
> > DPLL to a CRTC:
> >
> > [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr1 (expected 0x80000168, found 0x000004a5)
> > [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 108000, found 49500)
> > [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in port_clock (expected 108000, found 49500)
> >
> > This usually ends up causing blank monitors, since the DPLL never can
> > get set to the right clock.
> >
> > Fixes: f0f59a00a1 ("drm/i915: Type safe register read/write")
>
> Actually
> Fixes: 086f8e84a085 ("drm/i915: Prefix raw register defines with underscore")
>
> That's the second regression from the type safety stuff :( I guess we
> still don't have enough testing coverage since this has gone undetected
> for so long.
>
> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Queued for -next, thanks for the patch.
-Daniel
>
> > Signed-off-by: Lyude <cpaul@redhat.com>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 007ae83..b9a564b 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -7514,7 +7514,7 @@ enum skl_disp_power_wells {
> > #define DPLL_CFGCR2_PDIV_7 (4<<2)
> > #define DPLL_CFGCR2_CENTRAL_FREQ_MASK (3)
> >
> > -#define DPLL_CFGCR1(id) _MMIO_PIPE((id) - SKL_DPLL1, _DPLL1_CFGCR1, _DPLL2_CFGCR2)
> > +#define DPLL_CFGCR1(id) _MMIO_PIPE((id) - SKL_DPLL1, _DPLL1_CFGCR1, _DPLL2_CFGCR1)
> > #define DPLL_CFGCR2(id) _MMIO_PIPE((id) - SKL_DPLL1, _DPLL1_CFGCR2, _DPLL2_CFGCR2)
> >
> > /* BXT display engine PLL */
> > --
> > 2.5.0
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Ville Syrjälä
> Intel OTC
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-02-09 9:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-04 15:43 [PATCH] drm/i915/skl: Fix typo in DPLL_CFGCR1 definition Lyude
2016-02-04 16:11 ` Ville Syrjälä
2016-02-09 9:47 ` Daniel Vetter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).