From: Lukas Wunner <lukas@wunner.de>
To: intel-gfx@lists.freedesktop.org,
Damien Lespiau <damien.lespiau@intel.com>
Cc: gustav.fagerlind@gmail.com, "Li, Weinan Z" <weinan.z.li@intel.com>
Subject: Re: [PATCH RESEND FOR CI] drm/i915: Fix races on fbdev
Date: Thu, 3 Mar 2016 19:30:33 +0100 [thread overview]
Message-ID: <20160303183033.GA24555@wunner.de> (raw)
Hi Damien, Hi Daniel,
I've submitted the patch below for the third time now in an attempt
to get CI to test it, again to no avail. This time I didn't set the
In-Reply-To header and only submitted it as a single patch instead
of as a series because I expected this might confuse CI.
Nevertheless CI misclassified it under "Series" instead of "Patches",
reports that the series consists of 0 patches and doesn't test it:
https://patchwork.freedesktop.org/series/4068/
Earlier attempts:
https://patchwork.freedesktop.org/series/3453/
https://patchwork.freedesktop.org/series/3126/
Sorry, I give up.
Best regards,
Lukas
On Thu, Mar 03, 2016 at 06:02:53PM +0100, Lukas Wunner wrote:
> The ->lastclose callback invokes intel_fbdev_restore_mode() and has
> been witnessed to run before intel_fbdev_initial_config_async()
> has finished.
>
> We might likewise receive hotplug events or be suspended before
> we've had a chance to fully set up the fbdev.
>
> Fix by waiting for the asynchronous thread to finish.
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93580
> Reported-by: Gustav Fägerlind <gustav.fagerlind@gmail.com>
> Reported-by: "Li, Weinan Z" <weinan.z.li@intel.com>
> Cc: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: stable@vger.kernel.org
> Signed-off-by: Lukas Wunner <lukas@wunner.de>
> ---
> drivers/gpu/drm/i915/i915_dma.c | 8 +++-----
> drivers/gpu/drm/i915/intel_fbdev.c | 4 ++++
> 2 files changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
> index 4aa3db6..9d76dfb 100644
> --- a/drivers/gpu/drm/i915/i915_dma.c
> +++ b/drivers/gpu/drm/i915/i915_dma.c
> @@ -430,11 +430,9 @@ static int i915_load_modeset_init(struct drm_device *dev)
> * Some ports require correctly set-up hpd registers for detection to
> * work properly (leading to ghost connected connector status), e.g. VGA
> * on gm45. Hence we can only set up the initial fbdev config after hpd
> - * irqs are fully enabled. Now we should scan for the initial config
> - * only once hotplug handling is enabled, but due to screwed-up locking
> - * around kms/fbdev init we can't protect the fdbev initial config
> - * scanning against hotplug events. Hence do this first and ignore the
> - * tiny window where we will loose hotplug notifactions.
> + * irqs are fully enabled. We protect the fbdev initial config scanning
> + * against hotplug events by waiting in intel_fbdev_output_poll_changed
> + * until the asynchronous thread has finished.
> */
> intel_fbdev_initial_config_async(dev);
>
> diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
> index ae9cf6f..936c3d7 100644
> --- a/drivers/gpu/drm/i915/intel_fbdev.c
> +++ b/drivers/gpu/drm/i915/intel_fbdev.c
> @@ -754,6 +754,7 @@ void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous
> struct intel_fbdev *ifbdev = dev_priv->fbdev;
> struct fb_info *info;
>
> + async_synchronize_full();
> if (!ifbdev)
> return;
>
> @@ -800,6 +801,8 @@ void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous
> void intel_fbdev_output_poll_changed(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> +
> + async_synchronize_full();
> if (dev_priv->fbdev)
> drm_fb_helper_hotplug_event(&dev_priv->fbdev->helper);
> }
> @@ -811,6 +814,7 @@ void intel_fbdev_restore_mode(struct drm_device *dev)
> struct intel_fbdev *ifbdev = dev_priv->fbdev;
> struct drm_fb_helper *fb_helper;
>
> + async_synchronize_full();
> if (!ifbdev)
> return;
>
> --
> 1.8.5.2 (Apple Git-48)
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2016-03-03 18:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-03 18:30 Lukas Wunner [this message]
2016-03-04 10:17 ` [PATCH RESEND FOR CI] drm/i915: Fix races on fbdev Jani Nikula
2016-03-04 12:16 ` Damien Lespiau
-- strict thread matches above, loose matches on Subject: below --
2016-03-03 17:02 Lukas Wunner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160303183033.GA24555@wunner.de \
--to=lukas@wunner.de \
--cc=damien.lespiau@intel.com \
--cc=gustav.fagerlind@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=weinan.z.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox