From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 01/15] drm/i915: Remove checks for cloned config with LVDS in dpll code
Date: Tue, 22 Mar 2016 12:11:25 +0200 [thread overview]
Message-ID: <20160322101125.GC4329@intel.com> (raw)
In-Reply-To: <1458576016-30348-2-git-send-email-ander.conselvan.de.oliveira@intel.com>
On Mon, Mar 21, 2016 at 06:00:02PM +0200, Ander Conselvan de Oliveira wrote:
> LVDS is not cloneable, so the check is unnecessary. Removing it makes
> the code neater.
>
> v2: Remove checks from GMCH code too, not only ILK+. (Ville)
> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 70 +++++++++---------------------------
> 1 file changed, 16 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 28ead66..710fd9a 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -113,8 +113,7 @@ static void intel_begin_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
> static void intel_finish_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
> static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
> struct intel_crtc_state *crtc_state);
> -static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
> - int num_connectors);
> +static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state);
> static void skylake_pfit_enable(struct intel_crtc *crtc);
> static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
> static void ironlake_pfit_enable(struct intel_crtc *crtc);
> @@ -1076,7 +1075,7 @@ chv_find_best_dpll(const intel_limit_t *limit,
> bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, int target_clock,
> intel_clock_t *best_clock)
> {
> - int refclk = i9xx_get_refclk(crtc_state, 0);
> + int refclk = i9xx_get_refclk(crtc_state);
>
> return chv_find_best_dpll(intel_limit(crtc_state, refclk), crtc_state,
> target_clock, refclk, NULL, best_clock);
> @@ -7113,8 +7112,7 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
> && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
> }
>
> -static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
> - int num_connectors)
> +static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state)
> {
> struct drm_device *dev = crtc_state->base.crtc->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -7125,7 +7123,7 @@ static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
> if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev) || IS_BROXTON(dev)) {
> refclk = 100000;
> } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
> - intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
> + intel_panel_use_ssc(dev_priv)) {
> refclk = dev_priv->vbt.lvds_ssc_freq;
> DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
> } else if (!IS_GEN2(dev)) {
> @@ -7566,8 +7564,7 @@ void vlv_force_pll_off(struct drm_device *dev, enum pipe pipe)
>
> static void i9xx_compute_dpll(struct intel_crtc *crtc,
> struct intel_crtc_state *crtc_state,
> - intel_clock_t *reduced_clock,
> - int num_connectors)
> + intel_clock_t *reduced_clock)
> {
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -7626,7 +7623,7 @@ static void i9xx_compute_dpll(struct intel_crtc *crtc,
> if (crtc_state->sdvo_tv_clock)
> dpll |= PLL_REF_INPUT_TVCLKINBC;
> else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
> - intel_panel_use_ssc(dev_priv) && num_connectors < 2)
> + intel_panel_use_ssc(dev_priv))
> dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
> else
> dpll |= PLL_REF_INPUT_DREFCLK;
> @@ -7643,8 +7640,7 @@ static void i9xx_compute_dpll(struct intel_crtc *crtc,
>
> static void i8xx_compute_dpll(struct intel_crtc *crtc,
> struct intel_crtc_state *crtc_state,
> - intel_clock_t *reduced_clock,
> - int num_connectors)
> + intel_clock_t *reduced_clock)
> {
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -7670,7 +7666,7 @@ static void i8xx_compute_dpll(struct intel_crtc *crtc,
> dpll |= DPLL_DVO_2X_MODE;
>
> if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
> - intel_panel_use_ssc(dev_priv) && num_connectors < 2)
> + intel_panel_use_ssc(dev_priv))
> dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
> else
> dpll |= PLL_REF_INPUT_DREFCLK;
> @@ -7898,14 +7894,10 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
> {
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - int refclk, num_connectors = 0;
> + int refclk;
> intel_clock_t clock;
> bool ok;
> const intel_limit_t *limit;
> - struct drm_atomic_state *state = crtc_state->base.state;
> - struct drm_connector *connector;
> - struct drm_connector_state *connector_state;
> - int i;
>
> memset(&crtc_state->dpll_hw_state, 0,
> sizeof(crtc_state->dpll_hw_state));
> @@ -7913,13 +7905,8 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
> if (crtc_state->has_dsi_encoder)
> return 0;
>
> - for_each_connector_in_state(state, connector, connector_state, i) {
> - if (connector_state->crtc == &crtc->base)
> - num_connectors++;
> - }
> -
> if (!crtc_state->clock_set) {
> - refclk = i9xx_get_refclk(crtc_state, num_connectors);
> + refclk = i9xx_get_refclk(crtc_state);
>
> /*
> * Returns a set of divisors for the desired target clock with
> @@ -7945,15 +7932,13 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
> }
>
> if (IS_GEN2(dev)) {
> - i8xx_compute_dpll(crtc, crtc_state, NULL,
> - num_connectors);
> + i8xx_compute_dpll(crtc, crtc_state, NULL);
> } else if (IS_CHERRYVIEW(dev)) {
> chv_compute_dpll(crtc, crtc_state);
> } else if (IS_VALLEYVIEW(dev)) {
> vlv_compute_dpll(crtc, crtc_state);
> } else {
> - i9xx_compute_dpll(crtc, crtc_state, NULL,
> - num_connectors);
> + i9xx_compute_dpll(crtc, crtc_state, NULL);
> }
>
> return 0;
> @@ -8639,30 +8624,9 @@ static int ironlake_get_refclk(struct intel_crtc_state *crtc_state)
> {
> struct drm_device *dev = crtc_state->base.crtc->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - struct drm_atomic_state *state = crtc_state->base.state;
> - struct drm_connector *connector;
> - struct drm_connector_state *connector_state;
> - struct intel_encoder *encoder;
> - int num_connectors = 0, i;
> - bool is_lvds = false;
> -
> - for_each_connector_in_state(state, connector, connector_state, i) {
> - if (connector_state->crtc != crtc_state->base.crtc)
> - continue;
> -
> - encoder = to_intel_encoder(connector_state->best_encoder);
> -
> - switch (encoder->type) {
> - case INTEL_OUTPUT_LVDS:
> - is_lvds = true;
> - break;
> - default:
> - break;
> - }
> - num_connectors++;
> - }
>
> - if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
> + if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
> + intel_panel_use_ssc(dev_priv)) {
> DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
> dev_priv->vbt.lvds_ssc_freq);
> return dev_priv->vbt.lvds_ssc_freq;
> @@ -8896,7 +8860,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
> struct drm_connector_state *connector_state;
> struct intel_encoder *encoder;
> uint32_t dpll;
> - int factor, num_connectors = 0, i;
> + int factor, i;
> bool is_lvds = false, is_sdvo = false;
>
> for_each_connector_in_state(state, connector, connector_state, i) {
> @@ -8916,8 +8880,6 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
> default:
> break;
> }
> -
> - num_connectors++;
> }
>
> /* Enable autotuning of the PLL clock (if permissible) */
> @@ -8971,7 +8933,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
> break;
> }
>
> - if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
> + if (is_lvds && intel_panel_use_ssc(dev_priv))
> dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
> else
> dpll |= PLL_REF_INPUT_DREFCLK;
> --
> 2.4.3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-03-22 10:11 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-21 16:00 [PATCH v3 00/15] Clean up ironlake clock computation code Ander Conselvan de Oliveira
2016-03-21 16:00 ` [PATCH 01/15] drm/i915: Remove checks for cloned config with LVDS in dpll code Ander Conselvan de Oliveira
2016-03-22 10:11 ` Ville Syrjälä [this message]
2016-03-21 16:00 ` [PATCH 02/15] drm/i915: Merge ironlake_get_refclk() into its only caller Ander Conselvan de Oliveira
2016-03-21 16:00 ` [PATCH 03/15] drm/i915: Fold intel_ironlake_limit() into clock computation function Ander Conselvan de Oliveira
2016-03-21 16:00 ` [PATCH 04/15] drm/i915: Call g4x_find_best_dpll() directly from ILK+ code Ander Conselvan de Oliveira
2016-03-21 16:00 ` [PATCH 05/15] drm/i915: Simplify ironlake reduced clock logic a bit Ander Conselvan de Oliveira
2016-03-21 16:00 ` [PATCH 06/15] drm/i915: Don't calculate a new clock in ILK+ code if it is already set Ander Conselvan de Oliveira
2016-03-21 16:00 ` [PATCH 07/15] drm/i915: Remove PCH type checks from ironlake_crtc_compute_clock() Ander Conselvan de Oliveira
2016-03-21 16:00 ` [PATCH 08/15] drm/i915: Simplify ironlake_crtc_compute_clock() CPU eDP case Ander Conselvan de Oliveira
2016-03-21 16:00 ` [PATCH 09/15] drm/i915: Pass crtc_state->dpll directly to ->find_dpll() Ander Conselvan de Oliveira
2016-03-22 10:18 ` Ville Syrjälä
2016-03-21 16:00 ` [PATCH 10/15] drm/i915: Move fp divisor calculation into ironlake_compute_dpll() Ander Conselvan de Oliveira
2016-03-22 12:49 ` Ville Syrjälä
2016-03-22 13:22 ` Ander Conselvan De Oliveira
2016-03-21 16:00 ` [PATCH 11/15] drm/i915: Merge ironlake_compute_clocks() and ironlake_crtc_compute_clock() Ander Conselvan de Oliveira
2016-03-22 12:51 ` Ville Syrjälä
2016-03-21 16:00 ` [PATCH 12/15] drm/i915: Split CHV and VLV specific crtc_compute_clock() hooks Ander Conselvan de Oliveira
2016-03-22 10:26 ` Ville Syrjälä
2016-03-21 16:00 ` [PATCH 13/15] drm/i915: Split gen2_crtc_compute_clock() Ander Conselvan de Oliveira
2016-03-22 10:24 ` Ville Syrjälä
2016-03-22 11:11 ` Daniel Vetter
2016-03-22 13:35 ` [PATCH v2 13/15] drm/i915: Split i8xx_crtc_compute_clock() Ander Conselvan de Oliveira
2016-03-21 16:00 ` [PATCH 14/15] drm/i915: Split g4x_crtc_compute_clock() Ander Conselvan de Oliveira
2016-03-22 12:52 ` Ville Syrjälä
2016-03-21 16:00 ` [PATCH 15/15] drm/i915: Split PNV version of crtc_compute_clock() Ander Conselvan de Oliveira
2016-03-22 12:55 ` Ville Syrjälä
2016-03-22 9:33 ` ✗ Fi.CI.BAT: warning for Clean up ironlake clock computation code (rev3) Patchwork
2016-03-22 14:32 ` ✓ Fi.CI.BAT: success for Clean up ironlake clock computation code (rev4) Patchwork
2016-03-23 12:26 ` Ander Conselvan De Oliveira
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160322101125.GC4329@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=ander.conselvan.de.oliveira@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).