Re: [PATCH 04/16] drm/i915/skl+: Use plane size for relative data rate calculation

[Matt Roper <matthew.d.roper@intel.com>]

On Wed, Apr 06, 2016 at 06:09:00PM +0300, Imre Deak wrote:
> On to, 2016-03-31 at 18:46 -0700, Matt Roper wrote:
> > From: "Kumar, Mahesh" <mahesh1.kumar@intel.com>
> > 
> > Use plane size for relative data rate calculation. don't always use
> > pipe source width & height.
> > adjust height & width according to rotation.
> > use plane size for watermark calculations also.
> > 
> > v2: Address Matt's comments.
> >     Use intel_plane_state->visible to avoid divide-by-zero error.
> >     Where FB was present but not visible so causing total data rate
> > to
> >     be zero, hence divide-by-zero.
> > 
> > Cc: matthew.d.roper@intel.com
> > Signed-off-by: Kumar, Mahesh <mahesh1.kumar@intel.com>
> > Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
> > Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> 
> Reference: https://bugs.freedesktop.org/show_bug.cgi?id=93917
> Reference: https://bugs.freedesktop.org/show_bug.cgi?id=94044
> 
> This patch fixed a screen corruption problem for me with an eDP + DP
> config. It somehow made worse by moving the cursor around and I can get
> rid of it by switching of the cursor plane.
> 
> Matt any chance of getting this merged separately from the rest?
> 
> --Imre

Yep, I'd already reviewed this when Mahesh wrote it a while back so I
just ran this through CI in isolation and it came up clean.  Added
a Cc: -fixes and pushed to dinq.


Matt

> 
> > ---
> >  drivers/gpu/drm/i915/intel_pm.c | 41 ++++++++++++++++++++++++++++---
> > ----------
> >  1 file changed, 28 insertions(+), 13 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_pm.c
> > b/drivers/gpu/drm/i915/intel_pm.c
> > index c970c4e..1c3f772 100644
> > --- a/drivers/gpu/drm/i915/intel_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > @@ -2937,24 +2937,28 @@ skl_plane_relative_data_rate(const struct
> > intel_crtc_state *cstate,
> >  			     const struct drm_plane_state *pstate,
> >  			     int y)
> >  {
> > -	struct intel_crtc *intel_crtc = to_intel_crtc(cstate-
> > >base.crtc);
> > +	struct intel_plane_state *intel_pstate =
> > to_intel_plane_state(pstate);
> >  	struct drm_framebuffer *fb = pstate->fb;
> > +	uint32_t width = 0, height = 0;
> > +
> > +	width = drm_rect_width(&intel_pstate->src) >> 16;
> > +	height = drm_rect_height(&intel_pstate->src) >> 16;
> > +
> > +	if (intel_rotation_90_or_270(pstate->rotation))
> > +		swap(width, height);
> >  
> >  	/* for planar format */
> >  	if (fb->pixel_format == DRM_FORMAT_NV12) {
> >  		if (y)  /* y-plane data rate */
> > -			return intel_crtc->config->pipe_src_w *
> > -				intel_crtc->config->pipe_src_h *
> > +			return width * height *
> >  				drm_format_plane_cpp(fb-
> > >pixel_format, 0);
> >  		else    /* uv-plane data rate */
> > -			return (intel_crtc->config->pipe_src_w/2) *
> > -				(intel_crtc->config->pipe_src_h/2) *
> > +			return (width / 2) * (height / 2) *
> >  				drm_format_plane_cpp(fb-
> > >pixel_format, 1);
> >  	}
> >  
> >  	/* for packed formats */
> > -	return cstate->pipe_src_w * cstate->pipe_src_h *
> > -		drm_format_plane_cpp(fb->pixel_format, 0);
> > +	return width * height * drm_format_plane_cpp(fb-
> > >pixel_format, 0);
> >  }
> >  
> >  /*
> > @@ -3033,8 +3037,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state
> > *cstate,
> >  		struct drm_framebuffer *fb = plane->state->fb;
> >  		int id = skl_wm_plane_id(intel_plane);
> >  
> > -		if (fb == NULL)
> > +		if (!to_intel_plane_state(plane->state)->visible)
> >  			continue;
> > +
> >  		if (plane->type == DRM_PLANE_TYPE_CURSOR)
> >  			continue;
> >  
> > @@ -3060,7 +3065,7 @@ skl_allocate_pipe_ddb(struct intel_crtc_state
> > *cstate,
> >  		uint16_t plane_blocks, y_plane_blocks = 0;
> >  		int id = skl_wm_plane_id(intel_plane);
> >  
> > -		if (pstate->fb == NULL)
> > +		if (!to_intel_plane_state(pstate)->visible)
> >  			continue;
> >  		if (plane->type == DRM_PLANE_TYPE_CURSOR)
> >  			continue;
> > @@ -3183,26 +3188,36 @@ static bool skl_compute_plane_wm(const struct
> > drm_i915_private *dev_priv,
> >  {
> >  	struct drm_plane *plane = &intel_plane->base;
> >  	struct drm_framebuffer *fb = plane->state->fb;
> > +	struct intel_plane_state *intel_pstate =
> > +					to_intel_plane_state(plane-
> > >state);
> >  	uint32_t latency = dev_priv->wm.skl_latency[level];
> >  	uint32_t method1, method2;
> >  	uint32_t plane_bytes_per_line, plane_blocks_per_line;
> >  	uint32_t res_blocks, res_lines;
> >  	uint32_t selected_result;
> >  	uint8_t cpp;
> > +	uint32_t width = 0, height = 0;
> >  
> > -	if (latency == 0 || !cstate->base.active || !fb)
> > +	if (latency == 0 || !cstate->base.active || !intel_pstate-
> > >visible)
> >  		return false;
> >  
> > +	width = drm_rect_width(&intel_pstate->src) >> 16;
> > +	height = drm_rect_height(&intel_pstate->src) >> 16;
> > +
> > +	if (intel_rotation_90_or_270(plane->state->rotation))
> > +		swap(width, height);
> > +
> >  	cpp = drm_format_plane_cpp(fb->pixel_format, 0);
> >  	method1 = skl_wm_method1(skl_pipe_pixel_rate(cstate),
> >  				 cpp, latency);
> >  	method2 = skl_wm_method2(skl_pipe_pixel_rate(cstate),
> >  				 cstate-
> > >base.adjusted_mode.crtc_htotal,
> > -				 cstate->pipe_src_w,
> > -				 cpp, fb->modifier[0],
> > +				 width,
> > +				 cpp,
> > +				 fb->modifier[0],
> >  				 latency);
> >  
> > -	plane_bytes_per_line = cstate->pipe_src_w * cpp;
> > +	plane_bytes_per_line = width * cpp;
> >  	plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line,
> > 512);
> >  
> >  	if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||

-- 
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx