From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: Re: ✗ Fi.CI.BAT: warning for drm/i915: Cdclk related fixes and polish
Date: Wed, 27 Apr 2016 20:28:17 +0300 [thread overview]
Message-ID: <20160427172817.GR4329@intel.com> (raw)
In-Reply-To: <20160427061915.24244.74568@emeril.freedesktop.org>
On Wed, Apr 27, 2016 at 06:19:15AM -0000, Patchwork wrote:
> == Series Details ==
>
> Series: drm/i915: Cdclk related fixes and polish
> URL : https://patchwork.freedesktop.org/series/6354/
> State : warning
>
> == Summary ==
>
> Series 6354v1 drm/i915: Cdclk related fixes and polish
> http://patchwork.freedesktop.org/api/1.0/series/6354/revisions/1/mbox/
>
> Test drv_module_reload_basic:
> pass -> SKIP (skl-nuci5)
Reloading i915.ko with
unbinding /sys/class/vtconsole/vtcon1/: (M) frame buffer device
module successfully unloaded
module successfully loaded again
Reloading i915.ko with inject_load_failure=1
unbinding /sys/class/vtconsole/vtcon1/: (M) frame buffer device
Reloading i915.ko with inject_load_failure=2
unbinding /sys/class/vtconsole/vtcon1/: (M) frame buffer device
Reloading i915.ko with inject_load_failure=3
unbinding /sys/class/vtconsole/vtcon1/: (M) frame buffer device
Reloading i915.ko with inject_load_failure=4
unbinding /sys/class/vtconsole/vtcon1/: (M) frame buffer device
Reloading i915.ko with
unbinding /sys/class/vtconsole/vtcon1/: (M) frame buffer device
rmmod: ERROR: Module i915 is in use
rmmod: ERROR: Module i915 is in use
rmmod: ERROR: Module i915 is in use
rmmod: ERROR: Module i915 is in use
rmmod: ERROR: Module i915 is in use
So it managed to unload once, and after that it was no longer possible
to unload.
[ 436.902443] Console: switching to colour dummy device 80x25
...
[ 439.185816] [drm] Module unloaded
[ 439.285377] [drm:intel_detect_pch] Found SunrisePoint LP PCH
...
[ 440.671701] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 440.690772] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 440.719344] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
[ 440.719352] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 440.719356] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 440.719359] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 440.719362] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 440.719366] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 440.798836] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 440.801278] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 440.802905] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 440.804662] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 440.806351] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
after that nothing related. No real idea who/what was supposedly using
the module afterwards. Could have been snd-hda I suppose. It doesn't
seem to leave any trace in dmesg when it unloads, so can't tell from the dmesg.
> Test kms_pipe_crc_basic:
> Subgroup hang-read-crc-pipe-b:
> incomplete -> PASS (snb-dellxps)
>
> bdw-nuci7 total:200 pass:188 dwarn:0 dfail:0 fail:0 skip:12
> bdw-ultra total:200 pass:175 dwarn:0 dfail:0 fail:0 skip:25
> bsw-nuc-2 total:199 pass:158 dwarn:0 dfail:0 fail:0 skip:41
> byt-nuc total:199 pass:158 dwarn:0 dfail:0 fail:0 skip:41
> hsw-brixbox total:200 pass:174 dwarn:0 dfail:0 fail:0 skip:26
> skl-i7k-2 total:200 pass:173 dwarn:0 dfail:0 fail:0 skip:27
> skl-nuci5 total:200 pass:188 dwarn:0 dfail:0 fail:0 skip:12
> snb-dellxps total:200 pass:158 dwarn:0 dfail:0 fail:0 skip:42
> snb-x220t total:200 pass:158 dwarn:0 dfail:0 fail:1 skip:41
>
> Results at /archive/results/CI_IGT_test/Patchwork_2080/
>
> e005db1cb2c60d18abe837ac683d8993ea77b239 drm-intel-nightly: 2016y-04m-26d-12h-51m-57s UTC integration manifest
> b85d9d7 drm/i915: Fix comments about GMBUSFREQ register
> f897835 drm/i915: Use cached cdclk value in i915_audio_component_get_cdclk_freq()
> 4e443d4 drm/i915: Update CDCLK_FREQ register on BDW after changing cdclk frequency
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-04-27 17:28 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-26 16:46 [PATCH 0/3] drm/i915: Cdclk related fixes and polish ville.syrjala
2016-04-26 16:46 ` [PATCH 1/3] drm/i915: Update CDCLK_FREQ register on BDW after changing cdclk frequency ville.syrjala
2016-04-27 8:19 ` Mika Kahola
2016-04-26 16:46 ` [PATCH 2/3] drm/i915: Use cached cdclk value in i915_audio_component_get_cdclk_freq() ville.syrjala
2016-04-27 13:06 ` Mika Kahola
2016-04-26 16:46 ` [PATCH 3/3] drm/i915: Fix comments about GMBUSFREQ register ville.syrjala
2016-04-27 13:30 ` Mika Kahola
2016-04-27 13:56 ` Ville Syrjälä
2016-04-28 18:40 ` Ville Syrjälä
2016-04-27 6:19 ` ✗ Fi.CI.BAT: warning for drm/i915: Cdclk related fixes and polish Patchwork
2016-04-27 17:28 ` Ville Syrjälä [this message]
2016-04-27 17:34 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160427172817.GR4329@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox