From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 1/2] drm/i915/lvds: separate border enable readout from panel fitter
Date: Fri, 29 Apr 2016 16:46:43 +0300 [thread overview]
Message-ID: <20160429134643.GS4329@intel.com> (raw)
In-Reply-To: <1461933243-2140-1-git-send-email-jani.nikula@intel.com>
On Fri, Apr 29, 2016 at 03:34:02PM +0300, Jani Nikula wrote:
> The LVDS border enable is independent from the panel fitter. Move the
> readout of the "border bits" from i9xx_get_pfit_config() to
> intel_lvds_get_config(), where it will be read if LVDS is enabled even
> if the panel fitter is not.
>
> This fixes the state checker warning:
>
> [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in
> gmch_pfit.lvds_border_bits (expected 0x00008000, found 0x00000000)
>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87632
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Makes sense to me
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 3 ---
> drivers/gpu/drm/i915/intel_lvds.c | 4 ++++
> 2 files changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 5ffccf6e7f36..0fccebbd41a3 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -8022,9 +8022,6 @@ static void i9xx_get_pfit_config(struct intel_crtc *crtc,
>
> pipe_config->gmch_pfit.control = tmp;
> pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
> - if (INTEL_INFO(dev)->gen < 5)
> - pipe_config->gmch_pfit.lvds_border_bits =
> - I915_READ(LVDS) & LVDS_BORDER_ENABLE;
> }
>
> static void vlv_crtc_clock_get(struct intel_crtc *crtc,
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 66e832beeb37..bc53c0dd34d0 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -122,6 +122,10 @@ static void intel_lvds_get_config(struct intel_encoder *encoder,
>
> pipe_config->base.adjusted_mode.flags |= flags;
>
> + if (INTEL_INFO(dev)->gen < 5)
> + pipe_config->gmch_pfit.lvds_border_bits =
> + tmp & LVDS_BORDER_ENABLE;
> +
> /* gen2/3 store dither state in pfit control, needs to match */
> if (INTEL_INFO(dev)->gen < 4) {
> tmp = I915_READ(PFIT_CONTROL);
> --
> 2.1.4
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2016-04-29 13:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-29 12:34 [PATCH 1/2] drm/i915/lvds: separate border enable readout from panel fitter Jani Nikula
2016-04-29 12:34 ` [PATCH 2/2] drm/i915: do not set border enable software state for VLV/CHV Jani Nikula
2016-04-29 13:43 ` Ville Syrjälä
2016-04-29 14:08 ` Jani Nikula
2016-04-29 13:26 ` ✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915/lvds: separate border enable readout from panel fitter Patchwork
2016-04-29 13:46 ` Ville Syrjälä [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160429134643.GS4329@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox