From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: Re: ✗ Ro.CI.BAT: warning for drm/i915: Reject modeset if the dotclock is too high
Date: Fri, 27 May 2016 14:53:24 +0300 [thread overview]
Message-ID: <20160527115324.GA4329@intel.com> (raw)
In-Reply-To: <20160525052221.10316.96595@emeril.freedesktop.org>
On Wed, May 25, 2016 at 05:22:21AM -0000, Patchwork wrote:
> == Series Details ==
>
> Series: drm/i915: Reject modeset if the dotclock is too high
> URL : https://patchwork.freedesktop.org/series/7653/
> State : warning
>
> == Summary ==
>
> Series 7653v1 drm/i915: Reject modeset if the dotclock is too high
> http://patchwork.freedesktop.org/api/1.0/series/7653/revisions/1/mbox
>
> Test drv_module_reload_basic:
> skip -> PASS (ro-ivb-i7-3770)
> pass -> DMESG-WARN (ro-skl-i7-6700hq)
[ 143.693314] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
https://bugs.freedesktop.org/show_bug.cgi?id=95632
> Test gem_exec_flush:
> Subgroup basic-batch-kernel-default-cmd:
> fail -> PASS (fi-byt-n2820)
> Test kms_flip:
> Subgroup basic-flip-vs-wf_vblank:
> pass -> SKIP (fi-skl-i5-6260u)
(kms_flip:9621) igt-kms-WARNING: connector 37 has no modes
(kms_flip:9621) igt-kms-WARNING: connector 37 has no modes
(kms_flip:9621) igt-kms-WARNING: connector 37 has no modes
[ 426.641160] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00200000, dig 0x10101012, pins 0x00000020
[ 426.641169] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 5 - cnt: 0
[ 426.641243] [drm:i915_hotplug_work_func] running encoder hotplug functions
[ 426.641259] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 5) received hotplug event.
[ 426.641268] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-1]
[ 426.730833] [drm:intel_hdmi_detect] HDMI live status down
[ 426.730845] [drm:intel_hpd_irq_event] [CONNECTOR:37:HDMI-A-1] status updated from connected to disconnected
[ 426.730935] [drm:drm_fb_helper_hotplug_event]
[ 426.730938] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1]
[ 426.730941] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-1]
[ 426.746265] kms_flip: executing
[ 426.746392] [drm:i915_gem_open]
[ 426.746583] [drm:i915_gem_open]
[ 426.746747] [drm:i915_gem_open]
[ 426.818966] [drm:intel_hdmi_detect] HDMI live status down
[ 426.818976] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] disconnected
...
[ 426.942081] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 5) received hotplug event.
[ 426.942088] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-1]
[ 426.942099] [drm:intel_power_well_enable] enabling always-on
[ 426.971071] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 426.971076] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 426.971702] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 426.971712] [drm:drm_detect_monitor_audio] Monitor has basic audio support
[ 426.971716] [drm:intel_power_well_disable] disabling always-on
[ 426.971720] [drm:intel_hpd_irq_event] [CONNECTOR:37:HDMI-A-1] status updated from disconnected to connected
[ 426.972567] kms_flip: starting subtest basic-flip-vs-wf_vblank
[ 426.980243] kms_flip: exiting, ret=77
[ 426.991305] [drm:drm_fb_helper_hotplug_event]
[ 426.991309] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1]
[ 426.991312] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-1]
[ 426.991315] [drm:intel_power_well_enable] enabling always-on
[ 427.020106] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 427.020108] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 427.020731] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 427.020736] [drm:drm_detect_monitor_audio] Monitor has basic audio support
[ 427.020737] [drm:intel_power_well_disable] disabling always-on
[ 427.021039] [drm:drm_edid_to_eld] ELD monitor G246HYL
[ 427.021042] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
[ 427.021043] [drm:drm_edid_to_eld] ELD size 32, SAD count 1
[ 427.021100] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] probed modes :
[ 427.021103] [drm:drm_mode_debug_printmodeline] Modeline 48:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 427.021105] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
So looks like some kind of spurious hpd issue once again.
> Test kms_setmode:
> Subgroup basic-clone-single-crtc:
> dmesg-warn -> PASS (ro-skl-i7-6700hq)
>
> fi-bdw-i7-5557u total:209 pass:197 dwarn:0 dfail:0 fail:0 skip:12
> fi-byt-n2820 total:209 pass:169 dwarn:0 dfail:0 fail:2 skip:38
> fi-hsw-i7-4770r total:209 pass:186 dwarn:0 dfail:0 fail:0 skip:23
> fi-skl-i5-6260u total:209 pass:197 dwarn:0 dfail:0 fail:0 skip:12
> fi-skl-i7-6700k total:209 pass:184 dwarn:0 dfail:0 fail:0 skip:25
> fi-snb-i7-2600 total:209 pass:170 dwarn:0 dfail:0 fail:0 skip:39
> ro-bdw-i5-5250u total:209 pass:172 dwarn:0 dfail:0 fail:0 skip:37
> ro-bdw-i7-5557U total:209 pass:197 dwarn:0 dfail:0 fail:0 skip:12
> ro-bdw-i7-5600u total:209 pass:180 dwarn:0 dfail:0 fail:1 skip:28
> ro-bsw-n3050 total:209 pass:167 dwarn:0 dfail:0 fail:2 skip:40
> ro-byt-n2820 total:209 pass:169 dwarn:0 dfail:0 fail:3 skip:37
> ro-hsw-i3-4010u total:209 pass:186 dwarn:0 dfail:0 fail:0 skip:23
> ro-hsw-i7-4770r total:209 pass:186 dwarn:0 dfail:0 fail:0 skip:23
> ro-ilk-i7-620lm total:209 pass:146 dwarn:0 dfail:0 fail:1 skip:62
> ro-ilk1-i5-650 total:204 pass:146 dwarn:0 dfail:0 fail:1 skip:57
> ro-ivb-i7-3770 total:209 pass:177 dwarn:0 dfail:0 fail:0 skip:32
> ro-ivb2-i7-3770 total:209 pass:181 dwarn:0 dfail:0 fail:0 skip:28
> ro-skl-i7-6700hq total:204 pass:181 dwarn:2 dfail:0 fail:0 skip:21
> ro-snb-i7-2620M total:209 pass:170 dwarn:0 dfail:0 fail:1 skip:38
> fi-bsw-n3050 failed to connect after reboot
> fi-hsw-i7-4770k failed to connect after reboot
>
> Results at /archive/results/CI_IGT_test/RO_Patchwork_998/
>
> 3a7ef25 drm-intel-nightly: 2016y-05m-24d-12h-43m-51s UTC integration manifest
> c2f3c3d drm/i915: Reject modeset if the dotclock is too high
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-05-27 11:53 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-24 18:34 [PATCH] drm/i915: Reject modeset if the dotclock is too high ville.syrjala
2016-05-24 18:34 ` [PATCH i-g-t] tests: Add kms_invalid_dotclock ville.syrjala
2016-05-25 5:22 ` ✗ Ro.CI.BAT: warning for drm/i915: Reject modeset if the dotclock is too high Patchwork
2016-05-27 11:53 ` Ville Syrjälä [this message]
2016-05-25 8:15 ` [PATCH] " Jani Nikula
2016-05-27 11:54 ` Ville Syrjälä
2016-05-27 12:35 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160527115324.GA4329@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox