From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: "Sharma, Shashank" <shashank.sharma@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 2/7] drm/i915: Check has_infoframes when enabling infoframes
Date: Mon, 13 Jun 2016 15:24:27 +0300 [thread overview]
Message-ID: <20160613122427.GM4329@intel.com> (raw)
In-Reply-To: <575E6A8A.8010806@intel.com>
On Mon, Jun 13, 2016 at 01:40:50PM +0530, Sharma, Shashank wrote:
> Regards
> Shashank
>
> On 6/3/2016 1:25 AM, ville.syrjala@linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > has_infoframe is what tells us whether infoframes should be enabled, so
> > let's pass that instead of has_hdmi_sink to .set_infoframes().
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_ddi.c | 2 +-
> > drivers/gpu/drm/i915/intel_hdmi.c | 6 +++---
> > 2 files changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> > index 022b41d422dc..2fb28d310c22 100644
> > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > @@ -1631,7 +1631,7 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
> > struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
> >
> > intel_hdmi->set_infoframes(encoder,
> > - crtc->config->has_hdmi_sink,
> > + crtc->config->has_infoframe,
> I am a bit confused here, please correct me if I am not going in right
> direction, but what if its a DVI device which still needs video/AVI
> infoframes but can drop Audio IF ? Wont it make more sense to keep using
> has_hdmi_sink ?
DVI doesn't do infoframes, so not sure what you're asking here. Also we
don't deal with audio infoframes here.
> > &crtc->config->base.adjusted_mode);
> > }
> > }
> > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> > index eb455ea6ea92..067b10a7cb04 100644
> > --- a/drivers/gpu/drm/i915/intel_hdmi.c
> > +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> > @@ -1665,7 +1665,7 @@ static void intel_hdmi_pre_enable(struct intel_encoder *encoder)
> > intel_hdmi_prepare(encoder);
> >
> > intel_hdmi->set_infoframes(&encoder->base,
> > - intel_crtc->config->has_hdmi_sink,
> > + intel_crtc->config->has_infoframe,
> Same as above
>
> Regards
> Shashank
> > adjusted_mode);
> > }
> >
> > @@ -1686,7 +1686,7 @@ static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
> > 0x2b247878);
> >
> > intel_hdmi->set_infoframes(&encoder->base,
> > - intel_crtc->config->has_hdmi_sink,
> > + intel_crtc->config->has_infoframe,
> > adjusted_mode);
> >
> > g4x_enable_hdmi(encoder);
> > @@ -1749,7 +1749,7 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
> > chv_set_phy_signal_level(encoder, 128, 102, false);
> >
> > intel_hdmi->set_infoframes(&encoder->base,
> > - intel_crtc->config->has_hdmi_sink,
> > + intel_crtc->config->has_infoframe,
> > adjusted_mode);
> >
> > g4x_enable_hdmi(encoder);
> >
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-06-13 12:24 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-02 19:55 [PATCH 0/7] drm/i915: Make infoframe code available to (e)DP ports ville.syrjala
2016-06-02 19:55 ` [PATCH 1/7] drm/dp: Add defines for DP SDP types ville.syrjala
2016-06-02 19:55 ` [PATCH 2/7] drm/i915: Check has_infoframes when enabling infoframes ville.syrjala
2016-06-13 8:10 ` Sharma, Shashank
2016-06-13 12:24 ` Ville Syrjälä [this message]
2016-06-13 12:47 ` Sharma, Shashank
2016-06-02 19:55 ` [PATCH 3/7] drm/i915: Disable infoframes when shutting down DDI HDMI ville.syrjala
2016-06-13 10:06 ` Sharma, Shashank
2016-06-13 12:24 ` Ville Syrjälä
2016-06-13 12:48 ` Sharma, Shashank
2016-06-02 19:55 ` [PATCH 4/7] drm/i915: Move infoframe vfuncs into intel_digital_port ville.syrjala
2016-06-13 10:17 ` Sharma, Shashank
2016-06-13 12:25 ` Ville Syrjälä
2016-06-13 12:54 ` Sharma, Shashank
2016-06-02 19:55 ` [PATCH 5/7] drm/i915: Init infoframe vfuncs for DP encoders as well ville.syrjala
2016-06-13 11:44 ` Sharma, Shashank
2016-06-02 19:55 ` [PATCH 6/7] drm/i915: Remove mostly duplicated video DIP handling from PSR code ville.syrjala
2016-06-13 12:09 ` Sharma, Shashank
2016-06-13 12:27 ` Ville Syrjälä
2016-06-13 13:14 ` Sharma, Shashank
2016-06-02 19:55 ` [PATCH 7/7] drm/i915: Allow DP ports to set/readout infoframe state (WIP) ville.syrjala
2016-06-13 13:28 ` Sharma, Shashank
2016-06-14 14:16 ` Ville Syrjälä
2016-06-14 14:40 ` Sharma, Shashank
2016-06-15 9:37 ` Ville Syrjälä
2016-06-03 7:51 ` ✗ Ro.CI.BAT: warning for drm/i915: Make infoframe code available to (e)DP ports Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160613122427.GM4329@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=shashank.sharma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox