Re: [PATCH 11/14] drm/i915: Fallback to lower link rate and lane count during link training

[David Weinehall <david.weinehall@linux.intel.com>]

On Thu, Sep 01, 2016 at 03:08:16PM -0700, Manasi Navare wrote:
> According to the DisplayPort Spec, in case of Clock Recovery failure
> the link training sequence should fall back to the lower link rate
> followed by lower lane count until CR succeeds.
> On CR success, the sequence proceeds with Channel EQ.
> In case of Channel EQ failures, it should fallback to
> lower link rate and lane count and start the CR phase again.
> 
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_ddi.c              | 109 +++++++++++++++++++++++---
>  drivers/gpu/drm/i915/intel_dp_link_training.c |  12 ++-
>  drivers/gpu/drm/i915/intel_drv.h              |   4 +-
>  3 files changed, 110 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 67a6a0b..78d6687 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1634,29 +1634,50 @@ void intel_ddi_clk_select(struct intel_encoder *encoder,
>  	}
>  }
>  
> -static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
> +static void intel_ddi_pre_enable_edp(struct intel_encoder *encoder,
>  				    int link_rate, uint32_t lane_count,
> -				    struct intel_shared_dpll *pll,
> -				    bool link_mst)
> +				    struct intel_shared_dpll *pll)
>  {
>  	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>  	enum port port = intel_ddi_get_encoder_port(encoder);
>  
>  	intel_dp_set_link_params(intel_dp, link_rate, lane_count,
> -				 link_mst);
> -	if (encoder->type == INTEL_OUTPUT_EDP)
> -		intel_edp_panel_on(intel_dp);
> +				 false);
> +
> +	intel_edp_panel_on(intel_dp);
>  
>  	intel_ddi_clk_select(encoder, pll);
>  	intel_prepare_dp_ddi_buffers(encoder);
>  	intel_ddi_init_dp_buf_reg(encoder);
>  	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
>  	intel_dp_start_link_train(intel_dp);
> -	if (port != PORT_A || INTEL_GEN(dev_priv) >= 9)
> +	if (port != PORT_A || INTEL_INFO(dev_priv)->gen >= 9)

I think you got this backwards. We *want* to use INTEL_GEN().

[snip]


Kind regards, David Weinehall
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx