[PATCH 1/2] HAX drm/i915: Enable guc submission

[PATCH 1/2] HAX drm/i915: Enable guc submission

[Chris Wilson]

---
 drivers/gpu/drm/i915/i915_params.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
index d46ffe7086bc..599b913d8906 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -56,8 +56,8 @@ struct i915_params i915 __read_mostly = {
 	.verbose_state_checks = 1,
 	.nuclear_pageflip = 0,
 	.edp_vswing = 0,
-	.enable_guc_loading = 0,
-	.enable_guc_submission = 0,
+	.enable_guc_loading = -1,
+	.enable_guc_submission = -1,
 	.guc_log_level = -1,
 	.enable_dp_mst = true,
 	.inject_load_failure = 0,
-- 
2.10.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 2/2] drm/i915/guc: Split hw submission for replay after GPU reset

[Chris Wilson]

Something I missed before sending off the partial series was that the
non-scheduler guc reset path was broken (in the full series, this is
pushed to the execlists reset handler). The issue is that after a reset,
we have to refill the GuC workqueues, which we do by resubmitting the
requests. However, if we already have submitted them, the fences within
them have already been used and triggering them again is an error.
Instead, just repopulate the guc workqueue.

[  115.858560] [IGT] gem_busy: starting subtest hang-render
[  135.839867] [drm] GPU HANG: ecode 9:0:0xe757fefe, in gem_busy [1716], reason: Hang on render ring, action: reset
[  135.839902] drm/i915: Resetting chip after gpu hang
[  135.839957] [drm] RC6 on
[  135.858351] ------------[ cut here ]------------
[  135.858357] WARNING: CPU: 2 PID: 45 at drivers/gpu/drm/i915/i915_sw_fence.c:108 i915_sw_fence_complete+0x25/0x30
[  135.858357] Modules linked in: rfcomm bnep binfmt_misc nls_iso8859_1 input_leds snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core btusb btrtl snd_hwdep snd_pcm 8250_dw snd_seq_midi hid_lenovo snd_seq_midi_event snd_rawmidi iwlwifi x86_pkg_temp_thermal coretemp snd_seq crct10dif_pclmul snd_seq_device hci_uart snd_timer crc32_pclmul ghash_clmulni_intel idma64 aesni_intel virt_dma btbcm snd btqca aes_x86_64 btintel lrw cfg80211 bluetooth gf128mul glue_helper ablk_helper cryptd soundcore intel_lpss_pci intel_pch_thermal intel_lpss_acpi intel_lpss acpi_als mfd_core kfifo_buf acpi_pad industrialio autofs4 hid_plantronics usbhid dm_mirror dm_region_hash dm_log sdhci_pci ahci sdhci libahci i2c_hid hid
[  135.858389] CPU: 2 PID: 45 Comm: kworker/2:1 Tainted: G        W       4.9.0-rc4+ #238
[  135.858389] Hardware name:                  /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015
[  135.858392] Workqueue: events_long i915_hangcheck_elapsed
[  135.858394]  ffffc900001bf9b8 ffffffff812bb238 0000000000000000 0000000000000000
[  135.858396]  ffffc900001bf9f8 ffffffff8104f621 0000006c00000000 ffff8808296137f8
[  135.858398]  0000000000000a00 ffff8808457a0000 ffff880845764e60 ffff880845760000
[  135.858399] Call Trace:
[  135.858403]  [<ffffffff812bb238>] dump_stack+0x4d/0x65
[  135.858405]  [<ffffffff8104f621>] __warn+0xc1/0xe0
[  135.858406]  [<ffffffff8104f748>] warn_slowpath_null+0x18/0x20
[  135.858408]  [<ffffffff813f8c15>] i915_sw_fence_complete+0x25/0x30
[  135.858410]  [<ffffffff813f8fad>] i915_sw_fence_commit+0xd/0x30
[  135.858412]  [<ffffffff8142e591>] __i915_gem_request_submit+0xe1/0xf0
[  135.858413]  [<ffffffff8142e5c8>] i915_gem_request_submit+0x28/0x40
[  135.858415]  [<ffffffff814433e7>] i915_guc_submit+0x47/0x210
[  135.858417]  [<ffffffff81443e98>] i915_guc_submission_enable+0x468/0x540
[  135.858419]  [<ffffffff81442495>] intel_guc_setup+0x715/0x810
[  135.858421]  [<ffffffff8142b6b4>] i915_gem_init_hw+0x114/0x2a0
[  135.858423]  [<ffffffff813eeaa8>] i915_reset+0xe8/0x120
[  135.858424]  [<ffffffff813f3937>] i915_reset_and_wakeup+0x157/0x180
[  135.858426]  [<ffffffff813f79db>] i915_handle_error+0x1ab/0x230
[  135.858428]  [<ffffffff812c760d>] ? scnprintf+0x4d/0x90
[  135.858430]  [<ffffffff81435985>] i915_hangcheck_elapsed+0x275/0x3d0
[  135.858432]  [<ffffffff810668cf>] process_one_work+0x12f/0x410
[  135.858433]  [<ffffffff81066bf3>] worker_thread+0x43/0x4d0
[  135.858435]  [<ffffffff81066bb0>] ? process_one_work+0x410/0x410
[  135.858436]  [<ffffffff81066bb0>] ? process_one_work+0x410/0x410
[  135.858438]  [<ffffffff8106bbb4>] kthread+0xd4/0xf0
[  135.858440]  [<ffffffff8106bae0>] ? kthread_park+0x60/0x60

Fixes: d55ac5bf97c6 ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 drivers/gpu/drm/i915/i915_guc_submission.c | 38 ++++++++++++++++--------------
 1 file changed, 20 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c
index 4462112725ef..5939cff58eff 100644
--- a/drivers/gpu/drm/i915/i915_guc_submission.c
+++ b/drivers/gpu/drm/i915/i915_guc_submission.c
@@ -609,12 +609,9 @@ static int guc_ring_doorbell(struct i915_guc_client *gc)
 }
 
 /**
- * i915_guc_submit() - Submit commands through GuC
+ * __i915_guc_submit() - Submit commands through GuC
  * @rq:		request associated with the commands
  *
- * Return:	0 on success, otherwise an errno.
- * 		(Note: nonzero really shouldn't happen!)
- *
  * The caller must have already called i915_guc_wq_reserve() above with
  * a result of 0 (success), guaranteeing that there is space in the work
  * queue for the new request, so enqueuing the item cannot fail.
@@ -626,7 +623,7 @@ static int guc_ring_doorbell(struct i915_guc_client *gc)
  * The only error here arises if the doorbell hardware isn't functioning
  * as expected, which really shouln't happen.
  */
-static void i915_guc_submit(struct drm_i915_gem_request *rq)
+static void __i915_guc_submit(struct drm_i915_gem_request *rq)
 {
 	struct drm_i915_private *dev_priv = rq->i915;
 	struct intel_engine_cs *engine = rq->engine;
@@ -635,17 +632,6 @@ static void i915_guc_submit(struct drm_i915_gem_request *rq)
 	struct i915_guc_client *client = guc->execbuf_client;
 	int b_ret;
 
-	/* We keep the previous context alive until we retire the following
-	 * request. This ensures that any the context object is still pinned
-	 * for any residual writes the HW makes into it on the context switch
-	 * into the next object following the breadcrumb. Otherwise, we may
-	 * retire the context too early.
-	 */
-	rq->previous_context = engine->last_context;
-	engine->last_context = rq->ctx;
-
-	i915_gem_request_submit(rq);
-
 	spin_lock(&client->wq_lock);
 	guc_wq_item_append(client, rq);
 
@@ -665,6 +651,23 @@ static void i915_guc_submit(struct drm_i915_gem_request *rq)
 	spin_unlock(&client->wq_lock);
 }
 
+static void i915_guc_submit(struct drm_i915_gem_request *rq)
+{
+	struct intel_engine_cs *engine = rq->engine;
+
+	/* We keep the previous context alive until we retire the following
+	 * request. This ensures that any the context object is still pinned
+	 * for any residual writes the HW makes into it on the context switch
+	 * into the next object following the breadcrumb. Otherwise, we may
+	 * retire the context too early.
+	 */
+	rq->previous_context = engine->last_context;
+	engine->last_context = rq->ctx;
+
+	i915_gem_request_submit(rq);
+	__i915_guc_submit(rq);
+}
+
 /*
  * Everything below here is concerned with setup & teardown, and is
  * therefore not part of the somewhat time-critical batch-submission
@@ -1538,8 +1541,7 @@ int i915_guc_submission_enable(struct drm_i915_private *dev_priv)
 		list_for_each_entry(request,
 				    &engine->timeline->requests, link) {
 			client->wq_rsvd += sizeof(struct guc_wq_item);
-			if (i915_sw_fence_done(&request->submit))
-				i915_guc_submit(request);
+			__i915_guc_submit(request);
 		}
 	}
 
-- 
2.10.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 2/2] drm/i915/guc: Split hw submission for replay after GPU reset

[Tvrtko Ursulin]

On 16/11/2016 12:20, Chris Wilson wrote:
> Something I missed before sending off the partial series was that the
> non-scheduler guc reset path was broken (in the full series, this is
> pushed to the execlists reset handler). The issue is that after a reset,
> we have to refill the GuC workqueues, which we do by resubmitting the
> requests. However, if we already have submitted them, the fences within
> them have already been used and triggering them again is an error.
> Instead, just repopulate the guc workqueue.
>
> [  115.858560] [IGT] gem_busy: starting subtest hang-render
> [  135.839867] [drm] GPU HANG: ecode 9:0:0xe757fefe, in gem_busy [1716], reason: Hang on render ring, action: reset
> [  135.839902] drm/i915: Resetting chip after gpu hang
> [  135.839957] [drm] RC6 on
> [  135.858351] ------------[ cut here ]------------
> [  135.858357] WARNING: CPU: 2 PID: 45 at drivers/gpu/drm/i915/i915_sw_fence.c:108 i915_sw_fence_complete+0x25/0x30
> [  135.858357] Modules linked in: rfcomm bnep binfmt_misc nls_iso8859_1 input_leds snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core btusb btrtl snd_hwdep snd_pcm 8250_dw snd_seq_midi hid_lenovo snd_seq_midi_event snd_rawmidi iwlwifi x86_pkg_temp_thermal coretemp snd_seq crct10dif_pclmul snd_seq_device hci_uart snd_timer crc32_pclmul ghash_clmulni_intel idma64 aesni_intel virt_dma btbcm snd btqca aes_x86_64 btintel lrw cfg80211 bluetooth gf128mul glue_helper ablk_helper cryptd soundcore intel_lpss_pci intel_pch_thermal intel_lpss_acpi intel_lpss acpi_als mfd_core kfifo_buf acpi_pad industrialio autofs4 hid_plantronics usbhid dm_mirror dm_region_hash dm_log sdhci_pci ahci sdhci libahci i2c_hid hid
> [  135.858389] CPU: 2 PID: 45 Comm: kworker/2:1 Tainted: G        W       4.9.0-rc4+ #238
> [  135.858389] Hardware name:                  /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015
> [  135.858392] Workqueue: events_long i915_hangcheck_elapsed
> [  135.858394]  ffffc900001bf9b8 ffffffff812bb238 0000000000000000 0000000000000000
> [  135.858396]  ffffc900001bf9f8 ffffffff8104f621 0000006c00000000 ffff8808296137f8
> [  135.858398]  0000000000000a00 ffff8808457a0000 ffff880845764e60 ffff880845760000
> [  135.858399] Call Trace:
> [  135.858403]  [<ffffffff812bb238>] dump_stack+0x4d/0x65
> [  135.858405]  [<ffffffff8104f621>] __warn+0xc1/0xe0
> [  135.858406]  [<ffffffff8104f748>] warn_slowpath_null+0x18/0x20
> [  135.858408]  [<ffffffff813f8c15>] i915_sw_fence_complete+0x25/0x30
> [  135.858410]  [<ffffffff813f8fad>] i915_sw_fence_commit+0xd/0x30
> [  135.858412]  [<ffffffff8142e591>] __i915_gem_request_submit+0xe1/0xf0
> [  135.858413]  [<ffffffff8142e5c8>] i915_gem_request_submit+0x28/0x40
> [  135.858415]  [<ffffffff814433e7>] i915_guc_submit+0x47/0x210
> [  135.858417]  [<ffffffff81443e98>] i915_guc_submission_enable+0x468/0x540
> [  135.858419]  [<ffffffff81442495>] intel_guc_setup+0x715/0x810
> [  135.858421]  [<ffffffff8142b6b4>] i915_gem_init_hw+0x114/0x2a0
> [  135.858423]  [<ffffffff813eeaa8>] i915_reset+0xe8/0x120
> [  135.858424]  [<ffffffff813f3937>] i915_reset_and_wakeup+0x157/0x180
> [  135.858426]  [<ffffffff813f79db>] i915_handle_error+0x1ab/0x230
> [  135.858428]  [<ffffffff812c760d>] ? scnprintf+0x4d/0x90
> [  135.858430]  [<ffffffff81435985>] i915_hangcheck_elapsed+0x275/0x3d0
> [  135.858432]  [<ffffffff810668cf>] process_one_work+0x12f/0x410
> [  135.858433]  [<ffffffff81066bf3>] worker_thread+0x43/0x4d0
> [  135.858435]  [<ffffffff81066bb0>] ? process_one_work+0x410/0x410
> [  135.858436]  [<ffffffff81066bb0>] ? process_one_work+0x410/0x410
> [  135.858438]  [<ffffffff8106bbb4>] kthread+0xd4/0xf0
> [  135.858440]  [<ffffffff8106bae0>] ? kthread_park+0x60/0x60
>
> Fixes: d55ac5bf97c6 ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_guc_submission.c | 38 ++++++++++++++++--------------
>  1 file changed, 20 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c
> index 4462112725ef..5939cff58eff 100644
> --- a/drivers/gpu/drm/i915/i915_guc_submission.c
> +++ b/drivers/gpu/drm/i915/i915_guc_submission.c
> @@ -609,12 +609,9 @@ static int guc_ring_doorbell(struct i915_guc_client *gc)
>  }
>
>  /**
> - * i915_guc_submit() - Submit commands through GuC
> + * __i915_guc_submit() - Submit commands through GuC
>   * @rq:		request associated with the commands
>   *
> - * Return:	0 on success, otherwise an errno.
> - * 		(Note: nonzero really shouldn't happen!)
> - *
>   * The caller must have already called i915_guc_wq_reserve() above with
>   * a result of 0 (success), guaranteeing that there is space in the work
>   * queue for the new request, so enqueuing the item cannot fail.
> @@ -626,7 +623,7 @@ static int guc_ring_doorbell(struct i915_guc_client *gc)
>   * The only error here arises if the doorbell hardware isn't functioning
>   * as expected, which really shouln't happen.
>   */
> -static void i915_guc_submit(struct drm_i915_gem_request *rq)
> +static void __i915_guc_submit(struct drm_i915_gem_request *rq)
>  {
>  	struct drm_i915_private *dev_priv = rq->i915;
>  	struct intel_engine_cs *engine = rq->engine;
> @@ -635,17 +632,6 @@ static void i915_guc_submit(struct drm_i915_gem_request *rq)
>  	struct i915_guc_client *client = guc->execbuf_client;
>  	int b_ret;
>
> -	/* We keep the previous context alive until we retire the following
> -	 * request. This ensures that any the context object is still pinned
> -	 * for any residual writes the HW makes into it on the context switch
> -	 * into the next object following the breadcrumb. Otherwise, we may
> -	 * retire the context too early.
> -	 */
> -	rq->previous_context = engine->last_context;
> -	engine->last_context = rq->ctx;
> -
> -	i915_gem_request_submit(rq);
> -
>  	spin_lock(&client->wq_lock);
>  	guc_wq_item_append(client, rq);
>
> @@ -665,6 +651,23 @@ static void i915_guc_submit(struct drm_i915_gem_request *rq)
>  	spin_unlock(&client->wq_lock);
>  }
>
> +static void i915_guc_submit(struct drm_i915_gem_request *rq)
> +{
> +	struct intel_engine_cs *engine = rq->engine;
> +
> +	/* We keep the previous context alive until we retire the following
> +	 * request. This ensures that any the context object is still pinned
> +	 * for any residual writes the HW makes into it on the context switch
> +	 * into the next object following the breadcrumb. Otherwise, we may
> +	 * retire the context too early.
> +	 */
> +	rq->previous_context = engine->last_context;
> +	engine->last_context = rq->ctx;
> +
> +	i915_gem_request_submit(rq);
> +	__i915_guc_submit(rq);
> +}
> +
>  /*
>   * Everything below here is concerned with setup & teardown, and is
>   * therefore not part of the somewhat time-critical batch-submission
> @@ -1538,8 +1541,7 @@ int i915_guc_submission_enable(struct drm_i915_private *dev_priv)
>  		list_for_each_entry(request,
>  				    &engine->timeline->requests, link) {
>  			client->wq_rsvd += sizeof(struct guc_wq_item);
> -			if (i915_sw_fence_done(&request->submit))
> -				i915_guc_submit(request);
> +			__i915_guc_submit(request);
>  		}
>  	}
>
>

Sounds believable.

Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

I am just lost at the moment on where the equivalent execlist restart is 
in the code?

Regards,

Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.BAT: failure for series starting with [1/2] HAX drm/i915: Enable guc submission

[Patchwork]

== Series Details ==

Series: series starting with [1/2] HAX drm/i915: Enable guc submission
URL   : https://patchwork.freedesktop.org/series/15407/
State : failure

== Summary ==

Series 15407v1 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/15407/revisions/1/mbox/

Test gem_ringfill:
        Subgroup basic-default-hang:
                pass       -> INCOMPLETE (fi-skl-6770hq)
                pass       -> INCOMPLETE (fi-skl-6260u)
                pass       -> INCOMPLETE (fi-skl-6700k)
                pass       -> INCOMPLETE (fi-bxt-t5700)
                pass       -> INCOMPLETE (fi-skl-6700hq)

fi-bdw-5557u     total:244  pass:229  dwarn:0   dfail:0   fail:0   skip:15 
fi-bsw-n3050     total:244  pass:204  dwarn:0   dfail:0   fail:0   skip:40 
fi-bxt-t5700     total:115  pass:99   dwarn:0   dfail:0   fail:0   skip:15 
fi-byt-j1900     total:244  pass:216  dwarn:0   dfail:0   fail:0   skip:28 
fi-byt-n2820     total:244  pass:212  dwarn:0   dfail:0   fail:0   skip:32 
fi-hsw-4770      total:244  pass:224  dwarn:0   dfail:0   fail:0   skip:20 
fi-hsw-4770r     total:244  pass:224  dwarn:0   dfail:0   fail:0   skip:20 
fi-ilk-650       total:244  pass:191  dwarn:0   dfail:0   fail:0   skip:53 
fi-ivb-3520m     total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
fi-ivb-3770      total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
fi-kbl-7200u     total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
fi-skl-6260u     total:115  pass:110  dwarn:0   dfail:0   fail:0   skip:4  
fi-skl-6700hq    total:115  pass:102  dwarn:0   dfail:0   fail:0   skip:12 
fi-skl-6700k     total:115  pass:101  dwarn:1   dfail:0   fail:0   skip:12 
fi-skl-6770hq    total:115  pass:110  dwarn:0   dfail:0   fail:0   skip:4  
fi-snb-2520m     total:244  pass:212  dwarn:0   dfail:0   fail:0   skip:32 
fi-snb-2600      total:244  pass:211  dwarn:0   dfail:0   fail:0   skip:33 

6294f67611ebe69006c0e85c372efadcac8e9d66 drm-intel-nightly: 2016y-11m-16d-09h-57m-25s UTC integration manifest
95fed91 drm/i915/guc: Split hw submission for replay after GPU reset
4e3f1a4 HAX drm/i915: Enable guc submission

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_3018/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: ✗ Fi.CI.BAT: failure for series starting with [1/2] HAX drm/i915: Enable guc submission

[Chris Wilson]

On Wed, Nov 16, 2016 at 01:24:26PM -0000, Patchwork wrote:
> == Series Details ==
> 
> Series: series starting with [1/2] HAX drm/i915: Enable guc submission
> URL   : https://patchwork.freedesktop.org/series/15407/
> State : failure
> 
> == Summary ==
> 
> Series 15407v1 Series without cover letter
> https://patchwork.freedesktop.org/api/1.0/series/15407/revisions/1/mbox/
> 
> Test gem_ringfill:
>         Subgroup basic-default-hang:
>                 pass       -> INCOMPLETE (fi-skl-6770hq)
>                 pass       -> INCOMPLETE (fi-skl-6260u)
>                 pass       -> INCOMPLETE (fi-skl-6700k)
>                 pass       -> INCOMPLETE (fi-bxt-t5700)
>                 pass       -> INCOMPLETE (fi-skl-6700hq)

I'm worrying that this isn't the same issue - we no longer have the same
telltale. In fact, we don't have anything in the logs.
-Chris

-- 
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v2] drm/i915/guc: Split hw submission for replay after GPU reset

[Chris Wilson]

Something I missed before sending off the partial series was that the
non-scheduler guc reset path was broken (in the full series, this is
pushed to the execlists reset handler). The issue is that after a reset,
we have to refill the GuC workqueues, which we do by resubmitting the
requests. However, if we already have submitted them, the fences within
them have already been used and triggering them again is an error.
Instead, just repopulate the guc workqueue.

[  115.858560] [IGT] gem_busy: starting subtest hang-render
[  135.839867] [drm] GPU HANG: ecode 9:0:0xe757fefe, in gem_busy [1716], reason: Hang on render ring, action: reset
[  135.839902] drm/i915: Resetting chip after gpu hang
[  135.839957] [drm] RC6 on
[  135.858351] ------------[ cut here ]------------
[  135.858357] WARNING: CPU: 2 PID: 45 at drivers/gpu/drm/i915/i915_sw_fence.c:108 i915_sw_fence_complete+0x25/0x30
[  135.858357] Modules linked in: rfcomm bnep binfmt_misc nls_iso8859_1 input_leds snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core btusb btrtl snd_hwdep snd_pcm 8250_dw snd_seq_midi hid_lenovo snd_seq_midi_event snd_rawmidi iwlwifi x86_pkg_temp_thermal coretemp snd_seq crct10dif_pclmul snd_seq_device hci_uart snd_timer crc32_pclmul ghash_clmulni_intel idma64 aesni_intel virt_dma btbcm snd btqca aes_x86_64 btintel lrw cfg80211 bluetooth gf128mul glue_helper ablk_helper cryptd soundcore intel_lpss_pci intel_pch_thermal intel_lpss_acpi intel_lpss acpi_als mfd_core kfifo_buf acpi_pad industrialio autofs4 hid_plantronics usbhid dm_mirror dm_region_hash dm_log sdhci_pci ahci sdhci libahci i2c_hid hid
[  135.858389] CPU: 2 PID: 45 Comm: kworker/2:1 Tainted: G        W       4.9.0-rc4+ #238
[  135.858389] Hardware name:                  /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015
[  135.858392] Workqueue: events_long i915_hangcheck_elapsed
[  135.858394]  ffffc900001bf9b8 ffffffff812bb238 0000000000000000 0000000000000000
[  135.858396]  ffffc900001bf9f8 ffffffff8104f621 0000006c00000000 ffff8808296137f8
[  135.858398]  0000000000000a00 ffff8808457a0000 ffff880845764e60 ffff880845760000
[  135.858399] Call Trace:
[  135.858403]  [<ffffffff812bb238>] dump_stack+0x4d/0x65
[  135.858405]  [<ffffffff8104f621>] __warn+0xc1/0xe0
[  135.858406]  [<ffffffff8104f748>] warn_slowpath_null+0x18/0x20
[  135.858408]  [<ffffffff813f8c15>] i915_sw_fence_complete+0x25/0x30
[  135.858410]  [<ffffffff813f8fad>] i915_sw_fence_commit+0xd/0x30
[  135.858412]  [<ffffffff8142e591>] __i915_gem_request_submit+0xe1/0xf0
[  135.858413]  [<ffffffff8142e5c8>] i915_gem_request_submit+0x28/0x40
[  135.858415]  [<ffffffff814433e7>] i915_guc_submit+0x47/0x210
[  135.858417]  [<ffffffff81443e98>] i915_guc_submission_enable+0x468/0x540
[  135.858419]  [<ffffffff81442495>] intel_guc_setup+0x715/0x810
[  135.858421]  [<ffffffff8142b6b4>] i915_gem_init_hw+0x114/0x2a0
[  135.858423]  [<ffffffff813eeaa8>] i915_reset+0xe8/0x120
[  135.858424]  [<ffffffff813f3937>] i915_reset_and_wakeup+0x157/0x180
[  135.858426]  [<ffffffff813f79db>] i915_handle_error+0x1ab/0x230
[  135.858428]  [<ffffffff812c760d>] ? scnprintf+0x4d/0x90
[  135.858430]  [<ffffffff81435985>] i915_hangcheck_elapsed+0x275/0x3d0
[  135.858432]  [<ffffffff810668cf>] process_one_work+0x12f/0x410
[  135.858433]  [<ffffffff81066bf3>] worker_thread+0x43/0x4d0
[  135.858435]  [<ffffffff81066bb0>] ? process_one_work+0x410/0x410
[  135.858436]  [<ffffffff81066bb0>] ? process_one_work+0x410/0x410
[  135.858438]  [<ffffffff8106bbb4>] kthread+0xd4/0xf0
[  135.858440]  [<ffffffff8106bae0>] ? kthread_park+0x60/0x60

v2: Only resubmit submitted requests

Fixes: d55ac5bf97c6 ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 drivers/gpu/drm/i915/i915_guc_submission.c | 39 ++++++++++++++++--------------
 1 file changed, 21 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c
index 4462112725ef..aac80cdaa6cb 100644
--- a/drivers/gpu/drm/i915/i915_guc_submission.c
+++ b/drivers/gpu/drm/i915/i915_guc_submission.c
@@ -609,12 +609,9 @@ static int guc_ring_doorbell(struct i915_guc_client *gc)
 }
 
 /**
- * i915_guc_submit() - Submit commands through GuC
+ * __i915_guc_submit() - Submit commands through GuC
  * @rq:		request associated with the commands
  *
- * Return:	0 on success, otherwise an errno.
- * 		(Note: nonzero really shouldn't happen!)
- *
  * The caller must have already called i915_guc_wq_reserve() above with
  * a result of 0 (success), guaranteeing that there is space in the work
  * queue for the new request, so enqueuing the item cannot fail.
@@ -626,7 +623,7 @@ static int guc_ring_doorbell(struct i915_guc_client *gc)
  * The only error here arises if the doorbell hardware isn't functioning
  * as expected, which really shouln't happen.
  */
-static void i915_guc_submit(struct drm_i915_gem_request *rq)
+static void __i915_guc_submit(struct drm_i915_gem_request *rq)
 {
 	struct drm_i915_private *dev_priv = rq->i915;
 	struct intel_engine_cs *engine = rq->engine;
@@ -635,17 +632,6 @@ static void i915_guc_submit(struct drm_i915_gem_request *rq)
 	struct i915_guc_client *client = guc->execbuf_client;
 	int b_ret;
 
-	/* We keep the previous context alive until we retire the following
-	 * request. This ensures that any the context object is still pinned
-	 * for any residual writes the HW makes into it on the context switch
-	 * into the next object following the breadcrumb. Otherwise, we may
-	 * retire the context too early.
-	 */
-	rq->previous_context = engine->last_context;
-	engine->last_context = rq->ctx;
-
-	i915_gem_request_submit(rq);
-
 	spin_lock(&client->wq_lock);
 	guc_wq_item_append(client, rq);
 
@@ -665,6 +651,23 @@ static void i915_guc_submit(struct drm_i915_gem_request *rq)
 	spin_unlock(&client->wq_lock);
 }
 
+static void i915_guc_submit(struct drm_i915_gem_request *rq)
+{
+	struct intel_engine_cs *engine = rq->engine;
+
+	/* We keep the previous context alive until we retire the following
+	 * request. This ensures that any the context object is still pinned
+	 * for any residual writes the HW makes into it on the context switch
+	 * into the next object following the breadcrumb. Otherwise, we may
+	 * retire the context too early.
+	 */
+	rq->previous_context = engine->last_context;
+	engine->last_context = rq->ctx;
+
+	i915_gem_request_submit(rq);
+	__i915_guc_submit(rq);
+}
+
 /*
  * Everything below here is concerned with setup & teardown, and is
  * therefore not part of the somewhat time-critical batch-submission
@@ -1538,8 +1541,8 @@ int i915_guc_submission_enable(struct drm_i915_private *dev_priv)
 		list_for_each_entry(request,
 				    &engine->timeline->requests, link) {
 			client->wq_rsvd += sizeof(struct guc_wq_item);
-			if (i915_sw_fence_done(&request->submit))
-				i915_guc_submit(request);
+			if (i915_sw_fence_done(&request->execute))
+				__i915_guc_submit(request);
 		}
 	}
 
-- 
2.10.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.BAT: failure for series starting with [1/2] HAX drm/i915: Enable guc submission (rev2)

[Patchwork]

== Series Details ==

Series: series starting with [1/2] HAX drm/i915: Enable guc submission (rev2)
URL   : https://patchwork.freedesktop.org/series/15407/
State : failure

== Summary ==

Series 15407v2 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/15407/revisions/2/mbox/

Test drv_module_reload_basic:
                pass       -> DMESG-WARN (fi-skl-6260u)
                pass       -> DMESG-WARN (fi-skl-6770hq)
                pass       -> DMESG-WARN (fi-bxt-t5700)
Test gem_ringfill:
        Subgroup basic-default-hang:
                pass       -> INCOMPLETE (fi-skl-6700k)
                pass       -> INCOMPLETE (fi-skl-6260u)
                pass       -> INCOMPLETE (fi-skl-6700hq)
                pass       -> INCOMPLETE (fi-skl-6770hq)
                pass       -> INCOMPLETE (fi-bxt-t5700)

fi-bdw-5557u     total:244  pass:229  dwarn:0   dfail:0   fail:0   skip:15 
fi-bsw-n3050     total:244  pass:204  dwarn:0   dfail:0   fail:0   skip:40 
fi-bxt-t5700     total:115  pass:98   dwarn:1   dfail:0   fail:0   skip:15 
fi-byt-j1900     total:244  pass:216  dwarn:0   dfail:0   fail:0   skip:28 
fi-byt-n2820     total:244  pass:212  dwarn:0   dfail:0   fail:0   skip:32 
fi-hsw-4770      total:244  pass:224  dwarn:0   dfail:0   fail:0   skip:20 
fi-hsw-4770r     total:244  pass:224  dwarn:0   dfail:0   fail:0   skip:20 
fi-ilk-650       total:244  pass:191  dwarn:0   dfail:0   fail:0   skip:53 
fi-ivb-3520m     total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
fi-ivb-3770      total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
fi-kbl-7200u     total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
fi-skl-6260u     total:115  pass:109  dwarn:1   dfail:0   fail:0   skip:4  
fi-skl-6700hq    total:115  pass:102  dwarn:0   dfail:0   fail:0   skip:12 
fi-skl-6700k     total:115  pass:101  dwarn:1   dfail:0   fail:0   skip:12 
fi-skl-6770hq    total:115  pass:109  dwarn:1   dfail:0   fail:0   skip:4  
fi-snb-2520m     total:244  pass:212  dwarn:0   dfail:0   fail:0   skip:32 
fi-snb-2600      total:244  pass:211  dwarn:0   dfail:0   fail:0   skip:33 

6294f67611ebe69006c0e85c372efadcac8e9d66 drm-intel-nightly: 2016y-11m-16d-09h-57m-25s UTC integration manifest
121369d drm/i915/guc: Split hw submission for replay after GPU reset
32d59b0 HAX drm/i915: Enable guc submission

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_3021/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3] drm/i915/guc: Split hw submission for replay after GPU reset

[Chris Wilson]

Something I missed before sending off the partial series was that the
non-scheduler guc reset path was broken (in the full series, this is
pushed to the execlists reset handler). The issue is that after a reset,
we have to refill the GuC workqueues, which we do by resubmitting the
requests. However, if we already have submitted them, the fences within
them have already been used and triggering them again is an error.
Instead, just repopulate the guc workqueue.

[  115.858560] [IGT] gem_busy: starting subtest hang-render
[  135.839867] [drm] GPU HANG: ecode 9:0:0xe757fefe, in gem_busy [1716], reason: Hang on render ring, action: reset
[  135.839902] drm/i915: Resetting chip after gpu hang
[  135.839957] [drm] RC6 on
[  135.858351] ------------[ cut here ]------------
[  135.858357] WARNING: CPU: 2 PID: 45 at drivers/gpu/drm/i915/i915_sw_fence.c:108 i915_sw_fence_complete+0x25/0x30
[  135.858357] Modules linked in: rfcomm bnep binfmt_misc nls_iso8859_1 input_leds snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core btusb btrtl snd_hwdep snd_pcm 8250_dw snd_seq_midi hid_lenovo snd_seq_midi_event snd_rawmidi iwlwifi x86_pkg_temp_thermal coretemp snd_seq crct10dif_pclmul snd_seq_device hci_uart snd_timer crc32_pclmul ghash_clmulni_intel idma64 aesni_intel virt_dma btbcm snd btqca aes_x86_64 btintel lrw cfg80211 bluetooth gf128mul glue_helper ablk_helper cryptd soundcore intel_lpss_pci intel_pch_thermal intel_lpss_acpi intel_lpss acpi_als mfd_core kfifo_buf acpi_pad industrialio autofs4 hid_plantronics usbhid dm_mirror dm_region_hash dm_log sdhci_pci ahci sdhci libahci i2c_hid hid
[  135.858389] CPU: 2 PID: 45 Comm: kworker/2:1 Tainted: G        W       4.9.0-rc4+ #238
[  135.858389] Hardware name:                  /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015
[  135.858392] Workqueue: events_long i915_hangcheck_elapsed
[  135.858394]  ffffc900001bf9b8 ffffffff812bb238 0000000000000000 0000000000000000
[  135.858396]  ffffc900001bf9f8 ffffffff8104f621 0000006c00000000 ffff8808296137f8
[  135.858398]  0000000000000a00 ffff8808457a0000 ffff880845764e60 ffff880845760000
[  135.858399] Call Trace:
[  135.858403]  [<ffffffff812bb238>] dump_stack+0x4d/0x65
[  135.858405]  [<ffffffff8104f621>] __warn+0xc1/0xe0
[  135.858406]  [<ffffffff8104f748>] warn_slowpath_null+0x18/0x20
[  135.858408]  [<ffffffff813f8c15>] i915_sw_fence_complete+0x25/0x30
[  135.858410]  [<ffffffff813f8fad>] i915_sw_fence_commit+0xd/0x30
[  135.858412]  [<ffffffff8142e591>] __i915_gem_request_submit+0xe1/0xf0
[  135.858413]  [<ffffffff8142e5c8>] i915_gem_request_submit+0x28/0x40
[  135.858415]  [<ffffffff814433e7>] i915_guc_submit+0x47/0x210
[  135.858417]  [<ffffffff81443e98>] i915_guc_submission_enable+0x468/0x540
[  135.858419]  [<ffffffff81442495>] intel_guc_setup+0x715/0x810
[  135.858421]  [<ffffffff8142b6b4>] i915_gem_init_hw+0x114/0x2a0
[  135.858423]  [<ffffffff813eeaa8>] i915_reset+0xe8/0x120
[  135.858424]  [<ffffffff813f3937>] i915_reset_and_wakeup+0x157/0x180
[  135.858426]  [<ffffffff813f79db>] i915_handle_error+0x1ab/0x230
[  135.858428]  [<ffffffff812c760d>] ? scnprintf+0x4d/0x90
[  135.858430]  [<ffffffff81435985>] i915_hangcheck_elapsed+0x275/0x3d0
[  135.858432]  [<ffffffff810668cf>] process_one_work+0x12f/0x410
[  135.858433]  [<ffffffff81066bf3>] worker_thread+0x43/0x4d0
[  135.858435]  [<ffffffff81066bb0>] ? process_one_work+0x410/0x410
[  135.858436]  [<ffffffff81066bb0>] ? process_one_work+0x410/0x410
[  135.858438]  [<ffffffff8106bbb4>] kthread+0xd4/0xf0
[  135.858440]  [<ffffffff8106bae0>] ? kthread_park+0x60/0x60

v2: Only resubmit submitted requests
v3: Don't forget the pending requests have reserved space.

Fixes: d55ac5bf97c6 ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 drivers/gpu/drm/i915/i915_guc_submission.c | 53 +++++++++++++++++-------------
 1 file changed, 31 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c
index 4462112725ef..969073cd5032 100644
--- a/drivers/gpu/drm/i915/i915_guc_submission.c
+++ b/drivers/gpu/drm/i915/i915_guc_submission.c
@@ -609,12 +609,9 @@ static int guc_ring_doorbell(struct i915_guc_client *gc)
 }
 
 /**
- * i915_guc_submit() - Submit commands through GuC
+ * __i915_guc_submit() - Submit commands through GuC
  * @rq:		request associated with the commands
  *
- * Return:	0 on success, otherwise an errno.
- * 		(Note: nonzero really shouldn't happen!)
- *
  * The caller must have already called i915_guc_wq_reserve() above with
  * a result of 0 (success), guaranteeing that there is space in the work
  * queue for the new request, so enqueuing the item cannot fail.
@@ -626,7 +623,7 @@ static int guc_ring_doorbell(struct i915_guc_client *gc)
  * The only error here arises if the doorbell hardware isn't functioning
  * as expected, which really shouln't happen.
  */
-static void i915_guc_submit(struct drm_i915_gem_request *rq)
+static void __i915_guc_submit(struct drm_i915_gem_request *rq)
 {
 	struct drm_i915_private *dev_priv = rq->i915;
 	struct intel_engine_cs *engine = rq->engine;
@@ -635,17 +632,6 @@ static void i915_guc_submit(struct drm_i915_gem_request *rq)
 	struct i915_guc_client *client = guc->execbuf_client;
 	int b_ret;
 
-	/* We keep the previous context alive until we retire the following
-	 * request. This ensures that any the context object is still pinned
-	 * for any residual writes the HW makes into it on the context switch
-	 * into the next object following the breadcrumb. Otherwise, we may
-	 * retire the context too early.
-	 */
-	rq->previous_context = engine->last_context;
-	engine->last_context = rq->ctx;
-
-	i915_gem_request_submit(rq);
-
 	spin_lock(&client->wq_lock);
 	guc_wq_item_append(client, rq);
 
@@ -665,6 +651,23 @@ static void i915_guc_submit(struct drm_i915_gem_request *rq)
 	spin_unlock(&client->wq_lock);
 }
 
+static void i915_guc_submit(struct drm_i915_gem_request *rq)
+{
+	struct intel_engine_cs *engine = rq->engine;
+
+	/* We keep the previous context alive until we retire the following
+	 * request. This ensures that any the context object is still pinned
+	 * for any residual writes the HW makes into it on the context switch
+	 * into the next object following the breadcrumb. Otherwise, we may
+	 * retire the context too early.
+	 */
+	rq->previous_context = engine->last_context;
+	engine->last_context = rq->ctx;
+
+	i915_gem_request_submit(rq);
+	__i915_guc_submit(rq);
+}
+
 /*
  * Everything below here is concerned with setup & teardown, and is
  * therefore not part of the somewhat time-critical batch-submission
@@ -1513,6 +1516,7 @@ int i915_guc_submission_enable(struct drm_i915_private *dev_priv)
 	struct drm_i915_gem_request *request;
 	struct i915_guc_client *client;
 	struct intel_engine_cs *engine;
+	struct i915_gem_timeline *timeline;
 	enum intel_engine_id id;
 
 	/* client for execbuf submission */
@@ -1533,13 +1537,18 @@ int i915_guc_submission_enable(struct drm_i915_private *dev_priv)
 	for_each_engine(engine, dev_priv, id) {
 		engine->submit_request = i915_guc_submit;
 		engine->schedule = NULL;
+	}
+
+	/* Replay the current set of previously submitted requests */
+	list_for_each_entry(timeline, &dev_priv->gt.timelines, link) {
+		for_each_engine(engine, dev_priv, id) {
+			struct intel_timeline *tl = &timeline->engine[id];
 
-		/* Replay the current set of previously submitted requests */
-		list_for_each_entry(request,
-				    &engine->timeline->requests, link) {
-			client->wq_rsvd += sizeof(struct guc_wq_item);
-			if (i915_sw_fence_done(&request->submit))
-				i915_guc_submit(request);
+			list_for_each_entry(request, &tl->requests, link) {
+				client->wq_rsvd += sizeof(struct guc_wq_item);
+				if (i915_sw_fence_done(&request->execute))
+					__i915_guc_submit(request);
+			}
 		}
 	}
 
-- 
2.10.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.BAT: failure for series starting with [1/2] HAX drm/i915: Enable guc submission (rev3)

[Patchwork]

== Series Details ==

Series: series starting with [1/2] HAX drm/i915: Enable guc submission (rev3)
URL   : https://patchwork.freedesktop.org/series/15407/
State : failure

== Summary ==

Series 15407v3 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/15407/revisions/3/mbox/

Test drv_module_reload_basic:
                pass       -> DMESG-WARN (fi-skl-6770hq)
Test gem_ringfill:
        Subgroup basic-default-hang:
                pass       -> INCOMPLETE (fi-skl-6700k)
                pass       -> INCOMPLETE (fi-skl-6770hq)
                pass       -> INCOMPLETE (fi-skl-6260u)
                pass       -> INCOMPLETE (fi-bxt-t5700)
                pass       -> INCOMPLETE (fi-skl-6700hq)

fi-bdw-5557u     total:244  pass:229  dwarn:0   dfail:0   fail:0   skip:15 
fi-bsw-n3050     total:244  pass:204  dwarn:0   dfail:0   fail:0   skip:40 
fi-bxt-t5700     total:115  pass:99   dwarn:0   dfail:0   fail:0   skip:15 
fi-byt-j1900     total:244  pass:216  dwarn:0   dfail:0   fail:0   skip:28 
fi-byt-n2820     total:244  pass:212  dwarn:0   dfail:0   fail:0   skip:32 
fi-hsw-4770      total:244  pass:224  dwarn:0   dfail:0   fail:0   skip:20 
fi-hsw-4770r     total:244  pass:224  dwarn:0   dfail:0   fail:0   skip:20 
fi-ilk-650       total:244  pass:191  dwarn:0   dfail:0   fail:0   skip:53 
fi-ivb-3520m     total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
fi-ivb-3770      total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
fi-kbl-7200u     total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
fi-skl-6260u     total:115  pass:110  dwarn:0   dfail:0   fail:0   skip:4  
fi-skl-6700hq    total:115  pass:102  dwarn:0   dfail:0   fail:0   skip:12 
fi-skl-6700k     total:115  pass:101  dwarn:1   dfail:0   fail:0   skip:12 
fi-skl-6770hq    total:115  pass:109  dwarn:1   dfail:0   fail:0   skip:4  
fi-snb-2520m     total:244  pass:212  dwarn:0   dfail:0   fail:0   skip:32 
fi-snb-2600      total:244  pass:211  dwarn:0   dfail:0   fail:0   skip:33 

6294f67611ebe69006c0e85c372efadcac8e9d66 drm-intel-nightly: 2016y-11m-16d-09h-57m-25s UTC integration manifest
d60a754 drm/i915/guc: Split hw submission for replay after GPU reset
3ed4776 HAX drm/i915: Enable guc submission

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_3023/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx