From: Mahesh Kumar <mahesh1.kumar@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: paulo.r.zanoni@intel.com, maarten.lankhorst@intel.com
Subject: [PATCH v7 4/8] drm/i915/bxt: Enable IPC support
Date: Thu, 1 Dec 2016 21:19:36 +0530 [thread overview]
Message-ID: <20161201154940.24446-5-mahesh1.kumar@intel.com> (raw)
In-Reply-To: <20161201154940.24446-1-mahesh1.kumar@intel.com>
This patch adds IPC support for platforms. This patch enables IPC
only for BXT/KBL platform as for SKL recommendation is to keep is disabled.
IPC (Isochronous Priority Control) is the hardware feature, which
dynamically controles the memory read priority of Display.
When IPC is enabled, plane read requests are sent at high priority until
filling above the transition watermark, then the requests are sent at
lower priority until dropping below the level 0 watermark.
The lower priority requests allow other memory clients to have better
memory access. When IPC is disabled, all plane read requests are sent at
high priority.
Changes since V1:
- Remove commandline parameter to disable ipc
- Address Paulo's comments
Changes since V2:
- Address review comments
- Set ipc_enabled flag
Changes since V3:
- move ipc_enabled flag assignment inside intel_ipc_enable function
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
---
drivers/gpu/drm/i915/i915_drv.c | 2 +-
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_drv.h | 1 +
drivers/gpu/drm/i915/intel_pm.c | 16 ++++++++++++++++
4 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index f27e4bd..1c689b6 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1251,7 +1251,7 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
intel_runtime_pm_enable(dev_priv);
- dev_priv->ipc_enabled = false;
+ intel_enable_ipc(dev_priv);
/* Everything is in place, we can now relax! */
DRM_INFO("Initialized %s %d.%d.%d %s for %s on minor %d\n",
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 6747d68..649319d 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6418,6 +6418,7 @@ enum {
#define DISP_FBC_WM_DIS (1<<15)
#define DISP_ARB_CTL2 _MMIO(0x45004)
#define DISP_DATA_PARTITION_5_6 (1<<6)
+#define DISP_IPC_ENABLE (1<<3)
#define DBUF_CTL _MMIO(0x45008)
#define DBUF_POWER_REQUEST (1<<31)
#define DBUF_POWER_STATE (1<<30)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 9bbe5c5..3069512 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1755,6 +1755,7 @@ bool skl_ddb_allocation_overlaps(const struct skl_ddb_entry **entries,
uint32_t ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config);
bool ilk_disable_lp_wm(struct drm_device *dev);
int sanitize_rc6_option(struct drm_i915_private *dev_priv, int enable_rc6);
+void intel_enable_ipc(struct drm_i915_private *dev_priv);
static inline int intel_enable_rc6(void)
{
return i915.enable_rc6;
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 3650c74..8f0e6f5 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4655,6 +4655,22 @@ void intel_update_watermarks(struct intel_crtc *crtc)
dev_priv->display.update_wm(crtc);
}
+void intel_enable_ipc(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+
+ dev_priv->ipc_enabled = false;
+ if (!(IS_BROXTON(dev_priv) || IS_KABYLAKE(dev_priv)))
+ return;
+
+ val = I915_READ(DISP_ARB_CTL2);
+
+ val |= DISP_IPC_ENABLE;
+
+ I915_WRITE(DISP_ARB_CTL2, val);
+ dev_priv->ipc_enabled = true;
+}
+
/*
* Lock protecting IPS related data structures
*/
--
2.10.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-12-01 15:48 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-01 15:49 [PATCH v7 0/8] GEN-9 Arbitrated Bandwidth WM WA's & IPC Mahesh Kumar
2016-12-01 15:49 ` [PATCH v7 1/8] drm/i915/skl: Add variables to check x_tile and y_tile Mahesh Kumar
2016-12-01 15:49 ` [PATCH v7 2/8] drm/i915/bxt: IPC WA for Broxton Mahesh Kumar
2016-12-01 15:49 ` [PATCH v7 3/8] drm/i915/kbl: IPC workaround for kabylake Mahesh Kumar
2016-12-01 15:49 ` Mahesh Kumar [this message]
2016-12-01 15:49 ` [PATCH v7 5/8] drm/i915/skl+: change WM calc to fixed point 16.16 Mahesh Kumar
2016-12-01 15:49 ` [PATCH v7 6/8] drm/i915: Add intel_atomic_get_existing_crtc_state function Mahesh Kumar
2016-12-01 15:49 ` [PATCH v7 7/8] drm/i915: Decode system memory bandwidth Mahesh Kumar
2016-12-08 23:55 ` Paulo Zanoni
2017-02-15 15:00 ` Mahesh Kumar
2016-12-01 15:49 ` [PATCH v7 8/8] drm/i915/gen9: WM memory bandwidth related workaround Mahesh Kumar
2016-12-15 17:07 ` Paulo Zanoni
2017-02-15 15:00 ` Mahesh Kumar
2016-12-01 16:15 ` ✓ Fi.CI.BAT: success for GEN-9 Arbitrated Bandwidth WM WA's & IPC (rev3) Patchwork
2016-12-07 19:35 ` [PATCH v7 0/8] GEN-9 Arbitrated Bandwidth WM WA's & IPC Paulo Zanoni
2016-12-08 16:00 ` Daniel Vetter
2016-12-08 16:12 ` Zanoni, Paulo R
2016-12-08 16:18 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161201154940.24446-5-mahesh1.kumar@intel.com \
--to=mahesh1.kumar@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=maarten.lankhorst@intel.com \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox