[PATCH v3 0/5] Add Automation Support for DP Compliance Testing (Rev 3)

[PATCH v3 0/5] Add Automation Support for DP Compliance Testing (Rev 3)

[Manasi Navare]

This addresses all the review comments from the earlier patch series:
https://patchwork.freedesktop.org/series/16591/

DP 1.2 compliance testing can be acheived using DPR-120's CTS suite.
This compliance unit sends a short pulse to initiate link training
and video pattern generation compliance tests and sends a long pulse
to initate EDID compliance tests. It also sets the AUTOMATED TEST REQUEST
bit in Device IRQ to 1. These patches add support in the kernel to respond
to these test requests sent by DPR-120. The test handler has been added for
Link training/EDID and Video pattern compliance tests that gets invoked on
short/long pulse sent by DPR-120. The test handler for each of the tests
reads the corresponding DPCD registers to read the test parameters.

These tests need to be run with the IGT DP compliance automation tool.
Link Training Tests (4.3.1.1 - 4.3.2.3):
It reads the DPCD registers to get the link rate and lane count requested by
test and sends a hotplug uevent for the userspace to redo a modeset in order
to train the link at the requested test parameters.

EDID Tests (4.2.2.3 - 4.2.2.6):
It reads the EDID set by the DPR-120, if EDID read succeeds, it sets the
video mode to PREFERRED and sets the test_active flag. This flag wakes up
the IGT compliance tool that then fills the framebuffers and triggers a
modeset.

Video Pattern Tests (4.3.3.1):
It reads the DPCD registers to set the requested video pattern parameters.
It then sets the test active flag that wakes up the IGT tool, userspace
reads the video pattern values from corresponding debugfs files and fills the
framebuffers and triggers a modeset.


Manasi Navare (5):
  drm/i915: Move all the DP compliance data to a separate struct
  drm/i915: Add support for DP link training compliance
  drm/i915: Fixes to support DP Compliance EDID tests
  drm: Add definitions for DP compliance Video pattern tests
  drm/i915: Add support for DP Video pattern compliance tests

 drivers/gpu/drm/i915/i915_debugfs.c |  22 ++++--
 drivers/gpu/drm/i915/intel_dp.c     | 153 +++++++++++++++++++++++++++++++-----
 drivers/gpu/drm/i915/intel_dp_mst.c |   7 +-
 drivers/gpu/drm/i915/intel_drv.h    |  19 ++++-
 include/drm/drm_dp_helper.h         |  58 ++++++++++++++
 5 files changed, 232 insertions(+), 27 deletions(-)

-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 1/5] drm/i915: Move all the DP compliance data to a separate struct

[Manasi Navare]

This patch does not change anything functionally, just cleans up
the DP compliance related variables and stores them all together
in a separate struct intel_dp_compliance. There is another struct
intel_dp_compliance_data to store all the test data. This makes it easy to
reset the compliance variables through a memset instead of
individual resetting.

v2:
* Removed functional changes for EDID (Jani Nikula)

Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwl.ch>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 10 +++++-----
 drivers/gpu/drm/i915/intel_dp.c     | 24 ++++++++++--------------
 drivers/gpu/drm/i915/intel_drv.h    | 14 +++++++++++---
 3 files changed, 26 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index a746130..2c9b056 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -4463,9 +4463,9 @@ static ssize_t i915_displayport_test_active_write(struct file *file,
 			 * testing code, only accept an actual value of 1 here
 			 */
 			if (val == 1)
-				intel_dp->compliance_test_active = 1;
+				intel_dp->compliance.test_active = 1;
 			else
-				intel_dp->compliance_test_active = 0;
+				intel_dp->compliance.test_active = 0;
 		}
 	}
 out:
@@ -4492,7 +4492,7 @@ static int i915_displayport_test_active_show(struct seq_file *m, void *data)
 		if (connector->status == connector_status_connected &&
 		    connector->encoder != NULL) {
 			intel_dp = enc_to_intel_dp(connector->encoder);
-			if (intel_dp->compliance_test_active)
+			if (intel_dp->compliance.test_active)
 				seq_puts(m, "1");
 			else
 				seq_puts(m, "0");
@@ -4536,7 +4536,7 @@ static int i915_displayport_test_data_show(struct seq_file *m, void *data)
 		if (connector->status == connector_status_connected &&
 		    connector->encoder != NULL) {
 			intel_dp = enc_to_intel_dp(connector->encoder);
-			seq_printf(m, "%lx", intel_dp->compliance_test_data);
+			seq_printf(m, "%lx", intel_dp->compliance.test_data.edid);
 		} else
 			seq_puts(m, "0");
 	}
@@ -4575,7 +4575,7 @@ static int i915_displayport_test_type_show(struct seq_file *m, void *data)
 		if (connector->status == connector_status_connected &&
 		    connector->encoder != NULL) {
 			intel_dp = enc_to_intel_dp(connector->encoder);
-			seq_printf(m, "%02lx", intel_dp->compliance_test_type);
+			seq_printf(m, "%02lx", intel_dp->compliance.test_type);
 		} else
 			seq_puts(m, "0");
 	}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index db75bb9..c1e107c 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3834,7 +3834,7 @@ static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
 			DRM_DEBUG_KMS("EDID read had %d NACKs, %d DEFERs\n",
 				      intel_dp->aux.i2c_nack_count,
 				      intel_dp->aux.i2c_defer_count);
-		intel_dp->compliance_test_data = INTEL_DP_RESOLUTION_FAILSAFE;
+		intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_FAILSAFE;
 	} else {
 		struct edid *block = intel_connector->detect_edid;
 
@@ -3850,11 +3850,11 @@ static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
 			DRM_DEBUG_KMS("Failed to write EDID checksum\n");
 
 		test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE;
-		intel_dp->compliance_test_data = INTEL_DP_RESOLUTION_STANDARD;
+		intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_STANDARD;
 	}
 
 	/* Set test active flag here so userspace doesn't interrupt things */
-	intel_dp->compliance_test_active = 1;
+	intel_dp->compliance.test_active = 1;
 
 	return test_result;
 }
@@ -3880,22 +3880,22 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
 	switch (rxdata) {
 	case DP_TEST_LINK_TRAINING:
 		DRM_DEBUG_KMS("LINK_TRAINING test requested\n");
-		intel_dp->compliance_test_type = DP_TEST_LINK_TRAINING;
+		intel_dp->compliance.test_type = DP_TEST_LINK_TRAINING;
 		response = intel_dp_autotest_link_training(intel_dp);
 		break;
 	case DP_TEST_LINK_VIDEO_PATTERN:
 		DRM_DEBUG_KMS("TEST_PATTERN test requested\n");
-		intel_dp->compliance_test_type = DP_TEST_LINK_VIDEO_PATTERN;
+		intel_dp->compliance.test_type = DP_TEST_LINK_VIDEO_PATTERN;
 		response = intel_dp_autotest_video_pattern(intel_dp);
 		break;
 	case DP_TEST_LINK_EDID_READ:
 		DRM_DEBUG_KMS("EDID test requested\n");
-		intel_dp->compliance_test_type = DP_TEST_LINK_EDID_READ;
+		intel_dp->compliance.test_type = DP_TEST_LINK_EDID_READ;
 		response = intel_dp_autotest_edid(intel_dp);
 		break;
 	case DP_TEST_LINK_PHY_TEST_PATTERN:
 		DRM_DEBUG_KMS("PHY_PATTERN test requested\n");
-		intel_dp->compliance_test_type = DP_TEST_LINK_PHY_TEST_PATTERN;
+		intel_dp->compliance.test_type = DP_TEST_LINK_PHY_TEST_PATTERN;
 		response = intel_dp_autotest_phy_pattern(intel_dp);
 		break;
 	default:
@@ -4019,7 +4019,7 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
 		return;
 
 	/* if link training is requested we should perform it always */
-	if ((intel_dp->compliance_test_type == DP_TEST_LINK_TRAINING) ||
+	if ((intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) ||
 	    (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count))) {
 		DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
 			      intel_encoder->base.name);
@@ -4053,9 +4053,7 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
 	 * Clearing compliance test variables to allow capturing
 	 * of values for next automated test request.
 	 */
-	intel_dp->compliance_test_active = 0;
-	intel_dp->compliance_test_type = 0;
-	intel_dp->compliance_test_data = 0;
+	memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance));
 
 	/*
 	 * Now read the DPCD to see if it's actually running
@@ -4372,9 +4370,7 @@ static bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
 		status = connector_status_disconnected;
 
 	if (status == connector_status_disconnected) {
-		intel_dp->compliance_test_active = 0;
-		intel_dp->compliance_test_type = 0;
-		intel_dp->compliance_test_data = 0;
+		memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance));
 
 		if (intel_dp->is_mst) {
 			DRM_DEBUG_KMS("MST device may have disappeared %d vs %d\n",
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 8f4ddca..f8c7046 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -884,6 +884,16 @@ struct intel_dp_desc {
 	u8 sw_minor_rev;
 } __packed;
 
+struct intel_dp_compliance_data {
+	unsigned long edid;
+};
+
+struct intel_dp_compliance {
+	unsigned long test_type;
+	struct intel_dp_compliance_data test_data;
+	bool test_active;
+};
+
 struct intel_dp {
 	i915_reg_t output_reg;
 	i915_reg_t aux_ch_ctl_reg;
@@ -959,9 +969,7 @@ struct intel_dp {
 	void (*prepare_link_retrain)(struct intel_dp *intel_dp);
 
 	/* Displayport compliance testing */
-	unsigned long compliance_test_type;
-	unsigned long compliance_test_data;
-	bool compliance_test_active;
+	struct intel_dp_compliance compliance;
 };
 
 struct intel_lspcon {
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 2/5] drm/i915: Add support for DP link training compliance

[Manasi Navare]

This patch adds support to handle automated DP compliance
link training test requests. This patch has been tested with
Unigraf DPR-120 DP Compliance device for testing Link
Training Compliance.
After we get a short pulse Compliance test request, test
request values are read and hotplug uevent is sent in order
to trigger another modeset during which the pipe is configured
and link is retrained and enabled for link parameters requested
by the test.

v2:
* Validate the test lane count before using it in
intel_dp_compute_config (Jani Nikula)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c  | 62 +++++++++++++++++++++++++++++++++++++---
 drivers/gpu/drm/i915/intel_drv.h |  2 ++
 2 files changed, 60 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index c1e107c..bbf8cdc 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -278,6 +278,21 @@ static int intel_dp_common_rates(struct intel_dp *intel_dp,
 			       common_rates);
 }
 
+static int intel_dp_link_rate_index(struct intel_dp *intel_dp,
+				    int *common_rates, int link_rate)
+{
+	int common_len;
+	int index;
+
+	common_len = intel_dp_common_rates(intel_dp, common_rates);
+	for (index = 0; index < common_len; index++) {
+		if (link_rate == common_rates[common_len - index - 1])
+			return common_len - index - 1;
+	}
+
+	return -1;
+}
+
 static enum drm_mode_status
 intel_dp_mode_valid(struct drm_connector *connector,
 		    struct drm_display_mode *mode)
@@ -1544,6 +1559,7 @@ static int intel_dp_compute_bpp(struct intel_dp *intel_dp,
 	/* Conveniently, the link BW constants become indices with a shift...*/
 	int min_clock = 0;
 	int max_clock;
+	int link_rate_index;
 	int bpp, mode_rate;
 	int link_avail, link_clock;
 	int common_rates[DP_MAX_SUPPORTED_RATES] = {};
@@ -1585,6 +1601,17 @@ static int intel_dp_compute_bpp(struct intel_dp *intel_dp,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
 		return false;
 
+	/* Use values requested by Compliance Test Request */
+	if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) {
+		link_rate_index = intel_dp_link_rate_index(intel_dp,
+							   common_rates,
+							   drm_dp_bw_code_to_link_rate(intel_dp->compliance.test_link_rate));
+		if (link_rate_index >= 0)
+			min_clock = max_clock = link_rate_index;
+		if (min_lane_count <= intel_dp->compliance.test_lane_count
+		    && intel_dp->compliance.test_lane_count >= max_lane_count)
+			min_lane_count = max_lane_count = intel_dp->compliance.test_lane_count;
+	}
 	DRM_DEBUG_KMS("DP link computation with max lane count %i "
 		      "max bw %d pixel clock %iKHz\n",
 		      max_lane_count, common_rates[max_clock],
@@ -1632,6 +1659,7 @@ static int intel_dp_compute_bpp(struct intel_dp *intel_dp,
 				}
 			}
 		}
+
 	}
 
 	return false;
@@ -3804,6 +3832,27 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
 static uint8_t intel_dp_autotest_link_training(struct intel_dp *intel_dp)
 {
 	uint8_t test_result = DP_TEST_ACK;
+	int status = 0;
+	/* (DP CTS 1.2)
+	 * 4.3.1.11
+	 */
+	/* Read the TEST_LANE_COUNT and TEST_LINK_RTAE fields (DP CTS 3.1.4) */
+	status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LANE_COUNT,
+				  &intel_dp->compliance.test_lane_count);
+
+	if (status <= 0) {
+		DRM_DEBUG_KMS("Lane count read failed\n");
+		return 0;
+	}
+	intel_dp->compliance.test_lane_count &= DP_MAX_LANE_COUNT_MASK;
+
+	status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LINK_RATE,
+				   &intel_dp->compliance.test_link_rate);
+	if (status <= 0) {
+		DRM_DEBUG_KMS("Link Rate read failed\n");
+		return 0;
+	}
+
 	return test_result;
 }
 
@@ -4018,9 +4067,8 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
 	if (WARN_ON_ONCE(!intel_dp->lane_count))
 		return;
 
-	/* if link training is requested we should perform it always */
-	if ((intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) ||
-	    (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count))) {
+	/* Retrain if Channel EQ or CR not ok */
+	if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
 		DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
 			      intel_encoder->base.name);
 
@@ -4045,6 +4093,7 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
 intel_dp_short_pulse(struct intel_dp *intel_dp)
 {
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
+	struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
 	u8 sink_irq_vector = 0;
 	u8 old_sink_count = intel_dp->sink_count;
 	bool ret;
@@ -4078,7 +4127,7 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
 				   sink_irq_vector);
 
 		if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST)
-			DRM_DEBUG_DRIVER("Test request in short pulse not handled\n");
+			intel_dp_handle_test_request(intel_dp);
 		if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ))
 			DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
 	}
@@ -4086,6 +4135,11 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
 	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
 	intel_dp_check_link_status(intel_dp);
 	drm_modeset_unlock(&dev->mode_config.connection_mutex);
+	if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) {
+		DRM_DEBUG_KMS("Link Training Compliance Test requested\n");
+		/* Send a Hotplug Uevent to userspace to start modeset */
+		drm_kms_helper_hotplug_event(intel_encoder->base.dev);
+	}
 
 	return true;
 }
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index f8c7046..dbd580a 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -892,6 +892,8 @@ struct intel_dp_compliance {
 	unsigned long test_type;
 	struct intel_dp_compliance_data test_data;
 	bool test_active;
+	u8 test_link_rate;
+	u8 test_lane_count;
 };
 
 struct intel_dp {
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 3/5] drm/i915: Fixes to support DP Compliance EDID tests

[Manasi Navare]

This patch addresses a few issues from the original patch for
DP Compliance EDID test support submitted by
Todd Previte<todd.previte@gmail.com>

Video Mode requested in the EDID test handler for the EDID Read
test (CTS 4.2.2.3) should be set to PREFERRED as per the CTS spec.

v2:
* Added read debugfs data from test_data.edid if its EDID test (Jani NIkula)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 5 ++++-
 drivers/gpu/drm/i915/intel_dp.c     | 4 ++--
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 2c9b056..b2ff532 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -4536,7 +4536,10 @@ static int i915_displayport_test_data_show(struct seq_file *m, void *data)
 		if (connector->status == connector_status_connected &&
 		    connector->encoder != NULL) {
 			intel_dp = enc_to_intel_dp(connector->encoder);
-			seq_printf(m, "%lx", intel_dp->compliance.test_data.edid);
+			if (intel_dp->compliance.test_type ==
+			    DP_TEST_LINK_EDID_READ)
+				seq_printf(m, "%lx",
+					   intel_dp->compliance.test_data.edid);
 		} else
 			seq_puts(m, "0");
 	}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index bbf8cdc..fb6f9e5 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3864,7 +3864,7 @@ static uint8_t intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
 
 static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
 {
-	uint8_t test_result = DP_TEST_NAK;
+	uint8_t test_result = DP_TEST_ACK;
 	struct intel_connector *intel_connector = intel_dp->attached_connector;
 	struct drm_connector *connector = &intel_connector->base;
 
@@ -3899,7 +3899,7 @@ static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
 			DRM_DEBUG_KMS("Failed to write EDID checksum\n");
 
 		test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE;
-		intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_STANDARD;
+		intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_PREFERRED;
 	}
 
 	/* Set test active flag here so userspace doesn't interrupt things */
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 4/5] drm: Add definitions for DP compliance Video pattern tests

[Manasi Navare]

v2:
* Add all the other DP Complianec TEST register defs (Jani Nikula)
Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 include/drm/drm_dp_helper.h | 58 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 55bbeb0..3525d95 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -416,6 +416,64 @@
 #define DP_TEST_LANE_COUNT		    0x220
 
 #define DP_TEST_PATTERN			    0x221
+# define DP_NO_TEST_PATTERN                 (0x0)
+# define DP_COLOR_RAMP                      (0x1)
+# define DP_BLACK_AND_WHITE_VERTICAL_LINES  (0x2)
+# define DP_COLOR_SQUARE                    (0x3)
+
+#define DP_TEST_H_TOTAL_HI                  0x222
+#define DP_TEST_H_TOTAl_LO                  0x223
+
+#define DP_TEST_V_TOTAL_HI                  0x224
+#define DP_TEST_V_TOTAl_LO                  0x225
+
+#define DP_TEST_H_START_HI                  0x226
+#define DP_TEST_H_START_LO                  0x227
+
+#define DP_TEST_V_START_HI                  0x228
+#define DP_TEST_V_START_LO                  0x229
+
+#define DP_TEST_HSYNC_HI                    0x22A
+#define DP_TEST_HSYNC_LO                    0x22B
+
+#define DP_TEST_VSYNC_HI                    0x22C
+#define DP_TEST_VSYNC_LO                    0x22D
+
+#define DP_TEST_H_WIDTH_HI                  0x22E
+#define DP_TESt_H_WIDTH_LO                  0x22F
+
+#define DP_TEST_V_HEIGHT_HI                 0x230
+#define DP_TEST_V_HEIGHT_LO                 0x231
+
+#define DP_TEST_MISC_LO                     0x232
+# define DP_TEST_SYNC_CLOCK_MASK            (1 << 0)
+# define DP_CLOCK_ASYNC                     (0x0)
+# define DP_CLOCK_SYNC                      (0x1)
+# define DP_TEST_COLOR_FORMAT_MASK          (3 << 1)
+# define DP_TEST_COLOR_FORMAT_SHIFT         1
+# define DP_COLOR_FORMAT_RGB                (0x0)
+# define DP_COLOR_FORMAT_YCbCr422           (0x1)
+# define DP_COLOR_FORMAT_YCbCr444           (0x2)
+# define DP_TEST_DYNAMIC_RANGE_MASK         (1 << 3)
+# define DP_TEST_DYNAMIC_RANGE_SHIFT        3
+# define DP_VESA_RANGE                      (0x0)
+# define DP_CEA_RANGE                       (0x1)
+# define DP_TEST_BIT_DEPTH_MASK             (7 << 5)
+# define DP_TEST_BIT_DEPTH_SHIFT            5
+# define DP_TEST_BIT_DEPTH_6                (0x0)
+# define DP_TEST_BIT_DEPTH_8                (0x1)
+# define DP_TEST_BIT_DEPTH_10               (0x2)
+# define DP_TEST_BIT_DEPTH_12               (0x3)
+# define DP_TEST_BIT_DEPTH_16               (0x4)
+#define DP_TEST_MISC_HI                     0x233
+# define DP_TEST_REFRESH_DENOMINATOR_MASK   (1 << 0)
+# define REFRESH_DENOMINATOR_1              (0x0)
+# define REFRESH_DENOMINATOR_1_001          (0x1)
+# define DP_TEST_INTERLACED_MASK            (1 << 1)
+# define DP_NON_INTERLACED                  (0x0)
+# define DP_INTERLACED                      (0x1)
+
+#define DP_TEST_REFRESH_RATE_NUMERATOR      0x234
 
 #define DP_TEST_CRC_R_CR		    0x240
 #define DP_TEST_CRC_G_Y			    0x242
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 5/5] drm/i915: Add support for DP Video pattern compliance tests

[Manasi Navare]

The intel_dp_autotest_video_pattern() function gets invoked through the
compliance test handler on a HPD short pulse if the test type is
set to DP_TEST_VIDEO_PATTERN. This performs the DPCD registers
reads to read the requested test pattern, video pattern resolution,
frame rate and bits per color value. The results of this analysis
are handed off to userspace so that the userspace app can set the
video pattern mode appropriately for the test result/response.
When the  test is requested with specific BPC value, we read the BPC
value from the DPCD register. If this BPC value in intel_dp structure
has a non-zero value and we're on a display port connector, then we use
the value to calculate the bpp for the pipe.

The compliance_test_active flag is set at the end of the individual
test handling functions. This is so that the kernel-side operations
can be completed without the risk of interruption from the userspace
app that is polling on that flag.

v2:
* Updated the DPCD Register reads based on proper defines in header (Jani Nikula)
* Squahsed the patch that forced the pipe bpp to compliance test bpp (Jani Nikula)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c |  9 +++++
 drivers/gpu/drm/i915/intel_dp.c     | 67 +++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_dp_mst.c |  7 +++-
 drivers/gpu/drm/i915/intel_drv.h    |  3 ++
 4 files changed, 85 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index b2ff532..e87a46d 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -4540,6 +4540,15 @@ static int i915_displayport_test_data_show(struct seq_file *m, void *data)
 			    DP_TEST_LINK_EDID_READ)
 				seq_printf(m, "%lx",
 					   intel_dp->compliance.test_data.edid);
+			else if (intel_dp->compliance.test_type ==
+				 DP_TEST_LINK_VIDEO_PATTERN) {
+				seq_printf(m, "hdisplay: %d\n",
+					   intel_dp->compliance.test_data.hdisplay);
+				seq_printf(m, "vdisplay: %d\n",
+					   intel_dp->compliance.test_data.vdisplay);
+				seq_printf(m, "bpc: %u\n",
+					   intel_dp->compliance.test_data.bpc);
+			}
 		} else
 			seq_puts(m, "0");
 	}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index fb6f9e5..5e91bfc 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -28,8 +28,10 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/export.h>
+#include <linux/types.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
+#include <asm/byteorder.h>
 #include <drm/drmP.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc.h>
@@ -1539,6 +1541,12 @@ static int intel_dp_compute_bpp(struct intel_dp *intel_dp,
 	if (bpc > 0)
 		bpp = min(bpp, 3*bpc);
 
+	/* For DP Compliance we override the computed bpp for the pipe */
+	if (intel_dp->compliance.test_data.bpc != 0) {
+		pipe_config->pipe_bpp =	3*intel_dp->compliance.test_data.bpc;
+		DRM_DEBUG_KMS("Setting pipe_bpp to %d\n",
+			      pipe_config->pipe_bpp);
+	}
 	return bpp;
 }
 
@@ -3859,6 +3867,65 @@ static uint8_t intel_dp_autotest_link_training(struct intel_dp *intel_dp)
 static uint8_t intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
 {
 	uint8_t test_result = DP_TEST_NAK;
+	uint8_t test_pattern;
+	uint16_t test_misc;
+	__be16 h_width, v_height;
+	int status = 0;
+
+	/* Read the TEST_PATTERN (DP CTS 3.1.5) */
+	status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_PATTERN,
+				  &test_pattern, 1);
+	if (status <= 0) {
+		DRM_DEBUG_KMS("Test pattern read failed\n");
+		return 0;
+	}
+	if (test_pattern != DP_COLOR_RAMP)
+		return test_result;
+	intel_dp->compliance.test_data.video_pattern = test_pattern;
+
+	status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_H_WIDTH_HI,
+				  &h_width, 2);
+	if (status <= 0) {
+		DRM_DEBUG_KMS("H Width read failed\n");
+		return 0;
+	}
+	intel_dp->compliance.test_data.hdisplay = be16_to_cpu(h_width);
+
+	status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_V_HEIGHT_HI,
+				  &v_height, 2);
+	if (status <= 0) {
+		DRM_DEBUG_KMS("V Height read failed\n");
+		return 0;
+	}
+	intel_dp->compliance.test_data.vdisplay = be16_to_cpu(v_height);
+
+	status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_MISC_LO,
+				  &test_misc, 1);
+	if (status <= 0) {
+		DRM_DEBUG_KMS("TEST MISC read failed\n");
+		return 0;
+	}
+	if (((test_misc & DP_TEST_COLOR_FORMAT_MASK) >> DP_TEST_COLOR_FORMAT_SHIFT) !=
+	    DP_COLOR_FORMAT_RGB)
+		return test_result;
+	if (((test_misc & DP_TEST_DYNAMIC_RANGE_MASK) >> DP_TEST_DYNAMIC_RANGE_SHIFT) !=
+	    DP_VESA_RANGE)
+		return test_result;
+	switch ((test_misc & DP_TEST_BIT_DEPTH_MASK) >> DP_TEST_BIT_DEPTH_SHIFT) {
+	case DP_TEST_BIT_DEPTH_6:
+		intel_dp->compliance.test_data.bpc = 6;
+		break;
+	case DP_TEST_BIT_DEPTH_8:
+		intel_dp->compliance.test_data.bpc = 8;
+		break;
+	default:
+		return test_result;
+	}
+	/* Set test active flag here so userspace doesn't interrupt things */
+	intel_dp->compliance.test_active = 1;
+
+	test_result = DP_TEST_ACK;
+
 	return test_result;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
index 205fe47..29a9af1 100644
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -47,6 +47,11 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
 
 	pipe_config->has_pch_encoder = false;
 	bpp = 24;
+	if (intel_dp->compliance.test_data.bpc) {
+		bpp = intel_dp->compliance.test_data.bpc * 3;
+		DRM_DEBUG_KMS("Setting pipe bpp to %d\n",
+			      bpp);
+	}
 	/*
 	 * for MST we always configure max link bw - the spec doesn't
 	 * seem to suggest we should do otherwise.
@@ -55,7 +60,7 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
 
 	pipe_config->lane_count = lane_count;
 
-	pipe_config->pipe_bpp = 24;
+	pipe_config->pipe_bpp = bpp;
 	pipe_config->port_clock = intel_dp_max_link_rate(intel_dp);
 
 	state = pipe_config->base.state;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index dbd580a..fb02e06 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -886,6 +886,9 @@ struct intel_dp_desc {
 
 struct intel_dp_compliance_data {
 	unsigned long edid;
+	uint8_t video_pattern;
+	uint16_t hdisplay, vdisplay;
+	uint8_t bpc;
 };
 
 struct intel_dp_compliance {
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v3 2/5] drm/i915: Add support for DP link training compliance

[Manasi Navare]

Jani,

I have addressed few comments you had on the previous set of patches
about validating the test lane count so I am checking it against
min and max lane count values. Also made the debug prints
less verbose.
Could you please review this patch?

Regards
Manasi

On Fri, Dec 09, 2016 at 04:32:57PM -0800, Manasi Navare wrote:
> This patch adds support to handle automated DP compliance
> link training test requests. This patch has been tested with
> Unigraf DPR-120 DP Compliance device for testing Link
> Training Compliance.
> After we get a short pulse Compliance test request, test
> request values are read and hotplug uevent is sent in order
> to trigger another modeset during which the pipe is configured
> and link is retrained and enabled for link parameters requested
> by the test.
> 
> v2:
> * Validate the test lane count before using it in
> intel_dp_compute_config (Jani Nikula)
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dp.c  | 62 +++++++++++++++++++++++++++++++++++++---
>  drivers/gpu/drm/i915/intel_drv.h |  2 ++
>  2 files changed, 60 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index c1e107c..bbf8cdc 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -278,6 +278,21 @@ static int intel_dp_common_rates(struct intel_dp *intel_dp,
>  			       common_rates);
>  }
>  
> +static int intel_dp_link_rate_index(struct intel_dp *intel_dp,
> +				    int *common_rates, int link_rate)
> +{
> +	int common_len;
> +	int index;
> +
> +	common_len = intel_dp_common_rates(intel_dp, common_rates);
> +	for (index = 0; index < common_len; index++) {
> +		if (link_rate == common_rates[common_len - index - 1])
> +			return common_len - index - 1;
> +	}
> +
> +	return -1;
> +}
> +
>  static enum drm_mode_status
>  intel_dp_mode_valid(struct drm_connector *connector,
>  		    struct drm_display_mode *mode)
> @@ -1544,6 +1559,7 @@ static int intel_dp_compute_bpp(struct intel_dp *intel_dp,
>  	/* Conveniently, the link BW constants become indices with a shift...*/
>  	int min_clock = 0;
>  	int max_clock;
> +	int link_rate_index;
>  	int bpp, mode_rate;
>  	int link_avail, link_clock;
>  	int common_rates[DP_MAX_SUPPORTED_RATES] = {};
> @@ -1585,6 +1601,17 @@ static int intel_dp_compute_bpp(struct intel_dp *intel_dp,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
>  		return false;
>  
> +	/* Use values requested by Compliance Test Request */
> +	if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) {
> +		link_rate_index = intel_dp_link_rate_index(intel_dp,
> +							   common_rates,
> +							   drm_dp_bw_code_to_link_rate(intel_dp->compliance.test_link_rate));
> +		if (link_rate_index >= 0)
> +			min_clock = max_clock = link_rate_index;
> +		if (min_lane_count <= intel_dp->compliance.test_lane_count
> +		    && intel_dp->compliance.test_lane_count >= max_lane_count)
> +			min_lane_count = max_lane_count = intel_dp->compliance.test_lane_count;
> +	}
>  	DRM_DEBUG_KMS("DP link computation with max lane count %i "
>  		      "max bw %d pixel clock %iKHz\n",
>  		      max_lane_count, common_rates[max_clock],
> @@ -1632,6 +1659,7 @@ static int intel_dp_compute_bpp(struct intel_dp *intel_dp,
>  				}
>  			}
>  		}
> +
>  	}
>  
>  	return false;
> @@ -3804,6 +3832,27 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
>  static uint8_t intel_dp_autotest_link_training(struct intel_dp *intel_dp)
>  {
>  	uint8_t test_result = DP_TEST_ACK;
> +	int status = 0;
> +	/* (DP CTS 1.2)
> +	 * 4.3.1.11
> +	 */
> +	/* Read the TEST_LANE_COUNT and TEST_LINK_RTAE fields (DP CTS 3.1.4) */
> +	status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LANE_COUNT,
> +				  &intel_dp->compliance.test_lane_count);
> +
> +	if (status <= 0) {
> +		DRM_DEBUG_KMS("Lane count read failed\n");
> +		return 0;
> +	}
> +	intel_dp->compliance.test_lane_count &= DP_MAX_LANE_COUNT_MASK;
> +
> +	status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LINK_RATE,
> +				   &intel_dp->compliance.test_link_rate);
> +	if (status <= 0) {
> +		DRM_DEBUG_KMS("Link Rate read failed\n");
> +		return 0;
> +	}
> +
>  	return test_result;
>  }
>  
> @@ -4018,9 +4067,8 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
>  	if (WARN_ON_ONCE(!intel_dp->lane_count))
>  		return;
>  
> -	/* if link training is requested we should perform it always */
> -	if ((intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) ||
> -	    (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count))) {
> +	/* Retrain if Channel EQ or CR not ok */
> +	if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
>  		DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
>  			      intel_encoder->base.name);
>  
> @@ -4045,6 +4093,7 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
>  intel_dp_short_pulse(struct intel_dp *intel_dp)
>  {
>  	struct drm_device *dev = intel_dp_to_dev(intel_dp);
> +	struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
>  	u8 sink_irq_vector = 0;
>  	u8 old_sink_count = intel_dp->sink_count;
>  	bool ret;
> @@ -4078,7 +4127,7 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
>  				   sink_irq_vector);
>  
>  		if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST)
> -			DRM_DEBUG_DRIVER("Test request in short pulse not handled\n");
> +			intel_dp_handle_test_request(intel_dp);
>  		if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ))
>  			DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
>  	}
> @@ -4086,6 +4135,11 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
>  	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
>  	intel_dp_check_link_status(intel_dp);
>  	drm_modeset_unlock(&dev->mode_config.connection_mutex);
> +	if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) {
> +		DRM_DEBUG_KMS("Link Training Compliance Test requested\n");
> +		/* Send a Hotplug Uevent to userspace to start modeset */
> +		drm_kms_helper_hotplug_event(intel_encoder->base.dev);
> +	}
>  
>  	return true;
>  }
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index f8c7046..dbd580a 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -892,6 +892,8 @@ struct intel_dp_compliance {
>  	unsigned long test_type;
>  	struct intel_dp_compliance_data test_data;
>  	bool test_active;
> +	u8 test_link_rate;
> +	u8 test_lane_count;
>  };
>  
>  struct intel_dp {
> -- 
> 1.9.1
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v3 3/5] drm/i915: Fixes to support DP Compliance EDID tests

[Manasi Navare]

Jani,

This patch has just a few fixes to make the EDID tests follow the
DP CTS spec. where for the valid EDID it should set the EDID data to
PREFERRED Mode as opposed to STANDARD.
Also it sets the data to EDID if it is EDID test. Fairly simple and
is verified to be passing compliance with DPR-120.
Could you please review this?

Regards
Manasi

On Fri, Dec 09, 2016 at 04:32:58PM -0800, Manasi Navare wrote:
> This patch addresses a few issues from the original patch for
> DP Compliance EDID test support submitted by
> Todd Previte<todd.previte@gmail.com>
> 
> Video Mode requested in the EDID test handler for the EDID Read
> test (CTS 4.2.2.3) should be set to PREFERRED as per the CTS spec.
> 
> v2:
> * Added read debugfs data from test_data.edid if its EDID test (Jani NIkula)
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c | 5 ++++-
>  drivers/gpu/drm/i915/intel_dp.c     | 4 ++--
>  2 files changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 2c9b056..b2ff532 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -4536,7 +4536,10 @@ static int i915_displayport_test_data_show(struct seq_file *m, void *data)
>  		if (connector->status == connector_status_connected &&
>  		    connector->encoder != NULL) {
>  			intel_dp = enc_to_intel_dp(connector->encoder);
> -			seq_printf(m, "%lx", intel_dp->compliance.test_data.edid);
> +			if (intel_dp->compliance.test_type ==
> +			    DP_TEST_LINK_EDID_READ)
> +				seq_printf(m, "%lx",
> +					   intel_dp->compliance.test_data.edid);
>  		} else
>  			seq_puts(m, "0");
>  	}
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index bbf8cdc..fb6f9e5 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3864,7 +3864,7 @@ static uint8_t intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
>  
>  static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
>  {
> -	uint8_t test_result = DP_TEST_NAK;
> +	uint8_t test_result = DP_TEST_ACK;
>  	struct intel_connector *intel_connector = intel_dp->attached_connector;
>  	struct drm_connector *connector = &intel_connector->base;
>  
> @@ -3899,7 +3899,7 @@ static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
>  			DRM_DEBUG_KMS("Failed to write EDID checksum\n");
>  
>  		test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE;
> -		intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_STANDARD;
> +		intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_PREFERRED;
>  	}
>  
>  	/* Set test active flag here so userspace doesn't interrupt things */
> -- 
> 1.9.1
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v3 4/5] drm: Add definitions for DP compliance Video pattern tests

[Manasi Navare]

Jani,

I have added the defs for all compliance video pattern test registers as
you had commented on previous version of this patch.
It also fixes the indentation. Could you please review this patch?

Regards
Manasi


On Fri, Dec 09, 2016 at 04:32:59PM -0800, Manasi Navare wrote:
> v2:
> * Add all the other DP Complianec TEST register defs (Jani Nikula)
> Cc: dri-devel@lists.freedesktop.org
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  include/drm/drm_dp_helper.h | 58 +++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 58 insertions(+)
> 
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 55bbeb0..3525d95 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -416,6 +416,64 @@
>  #define DP_TEST_LANE_COUNT		    0x220
>  
>  #define DP_TEST_PATTERN			    0x221
> +# define DP_NO_TEST_PATTERN                 (0x0)
> +# define DP_COLOR_RAMP                      (0x1)
> +# define DP_BLACK_AND_WHITE_VERTICAL_LINES  (0x2)
> +# define DP_COLOR_SQUARE                    (0x3)
> +
> +#define DP_TEST_H_TOTAL_HI                  0x222
> +#define DP_TEST_H_TOTAl_LO                  0x223
> +
> +#define DP_TEST_V_TOTAL_HI                  0x224
> +#define DP_TEST_V_TOTAl_LO                  0x225
> +
> +#define DP_TEST_H_START_HI                  0x226
> +#define DP_TEST_H_START_LO                  0x227
> +
> +#define DP_TEST_V_START_HI                  0x228
> +#define DP_TEST_V_START_LO                  0x229
> +
> +#define DP_TEST_HSYNC_HI                    0x22A
> +#define DP_TEST_HSYNC_LO                    0x22B
> +
> +#define DP_TEST_VSYNC_HI                    0x22C
> +#define DP_TEST_VSYNC_LO                    0x22D
> +
> +#define DP_TEST_H_WIDTH_HI                  0x22E
> +#define DP_TESt_H_WIDTH_LO                  0x22F
> +
> +#define DP_TEST_V_HEIGHT_HI                 0x230
> +#define DP_TEST_V_HEIGHT_LO                 0x231
> +
> +#define DP_TEST_MISC_LO                     0x232
> +# define DP_TEST_SYNC_CLOCK_MASK            (1 << 0)
> +# define DP_CLOCK_ASYNC                     (0x0)
> +# define DP_CLOCK_SYNC                      (0x1)
> +# define DP_TEST_COLOR_FORMAT_MASK          (3 << 1)
> +# define DP_TEST_COLOR_FORMAT_SHIFT         1
> +# define DP_COLOR_FORMAT_RGB                (0x0)
> +# define DP_COLOR_FORMAT_YCbCr422           (0x1)
> +# define DP_COLOR_FORMAT_YCbCr444           (0x2)
> +# define DP_TEST_DYNAMIC_RANGE_MASK         (1 << 3)
> +# define DP_TEST_DYNAMIC_RANGE_SHIFT        3
> +# define DP_VESA_RANGE                      (0x0)
> +# define DP_CEA_RANGE                       (0x1)
> +# define DP_TEST_BIT_DEPTH_MASK             (7 << 5)
> +# define DP_TEST_BIT_DEPTH_SHIFT            5
> +# define DP_TEST_BIT_DEPTH_6                (0x0)
> +# define DP_TEST_BIT_DEPTH_8                (0x1)
> +# define DP_TEST_BIT_DEPTH_10               (0x2)
> +# define DP_TEST_BIT_DEPTH_12               (0x3)
> +# define DP_TEST_BIT_DEPTH_16               (0x4)
> +#define DP_TEST_MISC_HI                     0x233
> +# define DP_TEST_REFRESH_DENOMINATOR_MASK   (1 << 0)
> +# define REFRESH_DENOMINATOR_1              (0x0)
> +# define REFRESH_DENOMINATOR_1_001          (0x1)
> +# define DP_TEST_INTERLACED_MASK            (1 << 1)
> +# define DP_NON_INTERLACED                  (0x0)
> +# define DP_INTERLACED                      (0x1)
> +
> +#define DP_TEST_REFRESH_RATE_NUMERATOR      0x234
>  
>  #define DP_TEST_CRC_R_CR		    0x240
>  #define DP_TEST_CRC_G_Y			    0x242
> -- 
> 1.9.1
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 5/5] drm/i915: Add support for DP Video pattern compliance tests

[Manasi Navare]

Jani,

I have addressed all your review comments and using the proper
# defines from the header file for register and masks definitions.
Could you please review this patch?

Regards
Manasi

On Fri, Dec 09, 2016 at 04:33:00PM -0800, Manasi Navare wrote:
> The intel_dp_autotest_video_pattern() function gets invoked through the
> compliance test handler on a HPD short pulse if the test type is
> set to DP_TEST_VIDEO_PATTERN. This performs the DPCD registers
> reads to read the requested test pattern, video pattern resolution,
> frame rate and bits per color value. The results of this analysis
> are handed off to userspace so that the userspace app can set the
> video pattern mode appropriately for the test result/response.
> When the  test is requested with specific BPC value, we read the BPC
> value from the DPCD register. If this BPC value in intel_dp structure
> has a non-zero value and we're on a display port connector, then we use
> the value to calculate the bpp for the pipe.
> 
> The compliance_test_active flag is set at the end of the individual
> test handling functions. This is so that the kernel-side operations
> can be completed without the risk of interruption from the userspace
> app that is polling on that flag.
> 
> v2:
> * Updated the DPCD Register reads based on proper defines in header (Jani Nikula)
> * Squahsed the patch that forced the pipe bpp to compliance test bpp (Jani Nikula)
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c |  9 +++++
>  drivers/gpu/drm/i915/intel_dp.c     | 67 +++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_dp_mst.c |  7 +++-
>  drivers/gpu/drm/i915/intel_drv.h    |  3 ++
>  4 files changed, 85 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index b2ff532..e87a46d 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -4540,6 +4540,15 @@ static int i915_displayport_test_data_show(struct seq_file *m, void *data)
>  			    DP_TEST_LINK_EDID_READ)
>  				seq_printf(m, "%lx",
>  					   intel_dp->compliance.test_data.edid);
> +			else if (intel_dp->compliance.test_type ==
> +				 DP_TEST_LINK_VIDEO_PATTERN) {
> +				seq_printf(m, "hdisplay: %d\n",
> +					   intel_dp->compliance.test_data.hdisplay);
> +				seq_printf(m, "vdisplay: %d\n",
> +					   intel_dp->compliance.test_data.vdisplay);
> +				seq_printf(m, "bpc: %u\n",
> +					   intel_dp->compliance.test_data.bpc);
> +			}
>  		} else
>  			seq_puts(m, "0");
>  	}
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index fb6f9e5..5e91bfc 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -28,8 +28,10 @@
>  #include <linux/i2c.h>
>  #include <linux/slab.h>
>  #include <linux/export.h>
> +#include <linux/types.h>
>  #include <linux/notifier.h>
>  #include <linux/reboot.h>
> +#include <asm/byteorder.h>
>  #include <drm/drmP.h>
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_crtc.h>
> @@ -1539,6 +1541,12 @@ static int intel_dp_compute_bpp(struct intel_dp *intel_dp,
>  	if (bpc > 0)
>  		bpp = min(bpp, 3*bpc);
>  
> +	/* For DP Compliance we override the computed bpp for the pipe */
> +	if (intel_dp->compliance.test_data.bpc != 0) {
> +		pipe_config->pipe_bpp =	3*intel_dp->compliance.test_data.bpc;
> +		DRM_DEBUG_KMS("Setting pipe_bpp to %d\n",
> +			      pipe_config->pipe_bpp);
> +	}
>  	return bpp;
>  }
>  
> @@ -3859,6 +3867,65 @@ static uint8_t intel_dp_autotest_link_training(struct intel_dp *intel_dp)
>  static uint8_t intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
>  {
>  	uint8_t test_result = DP_TEST_NAK;
> +	uint8_t test_pattern;
> +	uint16_t test_misc;
> +	__be16 h_width, v_height;
> +	int status = 0;
> +
> +	/* Read the TEST_PATTERN (DP CTS 3.1.5) */
> +	status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_PATTERN,
> +				  &test_pattern, 1);
> +	if (status <= 0) {
> +		DRM_DEBUG_KMS("Test pattern read failed\n");
> +		return 0;
> +	}
> +	if (test_pattern != DP_COLOR_RAMP)
> +		return test_result;
> +	intel_dp->compliance.test_data.video_pattern = test_pattern;
> +
> +	status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_H_WIDTH_HI,
> +				  &h_width, 2);
> +	if (status <= 0) {
> +		DRM_DEBUG_KMS("H Width read failed\n");
> +		return 0;
> +	}
> +	intel_dp->compliance.test_data.hdisplay = be16_to_cpu(h_width);
> +
> +	status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_V_HEIGHT_HI,
> +				  &v_height, 2);
> +	if (status <= 0) {
> +		DRM_DEBUG_KMS("V Height read failed\n");
> +		return 0;
> +	}
> +	intel_dp->compliance.test_data.vdisplay = be16_to_cpu(v_height);
> +
> +	status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_MISC_LO,
> +				  &test_misc, 1);
> +	if (status <= 0) {
> +		DRM_DEBUG_KMS("TEST MISC read failed\n");
> +		return 0;
> +	}
> +	if (((test_misc & DP_TEST_COLOR_FORMAT_MASK) >> DP_TEST_COLOR_FORMAT_SHIFT) !=
> +	    DP_COLOR_FORMAT_RGB)
> +		return test_result;
> +	if (((test_misc & DP_TEST_DYNAMIC_RANGE_MASK) >> DP_TEST_DYNAMIC_RANGE_SHIFT) !=
> +	    DP_VESA_RANGE)
> +		return test_result;
> +	switch ((test_misc & DP_TEST_BIT_DEPTH_MASK) >> DP_TEST_BIT_DEPTH_SHIFT) {
> +	case DP_TEST_BIT_DEPTH_6:
> +		intel_dp->compliance.test_data.bpc = 6;
> +		break;
> +	case DP_TEST_BIT_DEPTH_8:
> +		intel_dp->compliance.test_data.bpc = 8;
> +		break;
> +	default:
> +		return test_result;
> +	}
> +	/* Set test active flag here so userspace doesn't interrupt things */
> +	intel_dp->compliance.test_active = 1;
> +
> +	test_result = DP_TEST_ACK;
> +
>  	return test_result;
>  }
>  
> diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
> index 205fe47..29a9af1 100644
> --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> @@ -47,6 +47,11 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
>  
>  	pipe_config->has_pch_encoder = false;
>  	bpp = 24;
> +	if (intel_dp->compliance.test_data.bpc) {
> +		bpp = intel_dp->compliance.test_data.bpc * 3;
> +		DRM_DEBUG_KMS("Setting pipe bpp to %d\n",
> +			      bpp);
> +	}
>  	/*
>  	 * for MST we always configure max link bw - the spec doesn't
>  	 * seem to suggest we should do otherwise.
> @@ -55,7 +60,7 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
>  
>  	pipe_config->lane_count = lane_count;
>  
> -	pipe_config->pipe_bpp = 24;
> +	pipe_config->pipe_bpp = bpp;
>  	pipe_config->port_clock = intel_dp_max_link_rate(intel_dp);
>  
>  	state = pipe_config->base.state;
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index dbd580a..fb02e06 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -886,6 +886,9 @@ struct intel_dp_desc {
>  
>  struct intel_dp_compliance_data {
>  	unsigned long edid;
> +	uint8_t video_pattern;
> +	uint16_t hdisplay, vdisplay;
> +	uint8_t bpc;
>  };
>  
>  struct intel_dp_compliance {
> -- 
> 1.9.1
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.BAT: warning for Add Automation Support for DP Compliance Testing (Rev 3)

[Patchwork]

== Series Details ==

Series: Add Automation Support for DP Compliance Testing (Rev 3)
URL   : https://patchwork.freedesktop.org/series/16643/
State : warning

== Summary ==

Series 16643v1 Add Automation Support for DP Compliance Testing (Rev 3)
https://patchwork.freedesktop.org/api/1.0/series/16643/revisions/1/mbox/

Test drv_module_reload:
        Subgroup basic-reload-inject:
                pass       -> DMESG-WARN (fi-bsw-n3050)

fi-bdw-5557u     total:247  pass:233  dwarn:0   dfail:0   fail:0   skip:14 
fi-bsw-n3050     total:247  pass:207  dwarn:1   dfail:0   fail:0   skip:39 
fi-bxt-t5700     total:247  pass:220  dwarn:0   dfail:0   fail:0   skip:27 
fi-byt-j1900     total:247  pass:220  dwarn:0   dfail:0   fail:0   skip:27 
fi-byt-n2820     total:247  pass:216  dwarn:0   dfail:0   fail:0   skip:31 
fi-hsw-4770      total:247  pass:228  dwarn:0   dfail:0   fail:0   skip:19 
fi-hsw-4770r     total:247  pass:228  dwarn:0   dfail:0   fail:0   skip:19 
fi-ilk-650       total:247  pass:195  dwarn:0   dfail:0   fail:0   skip:52 
fi-ivb-3520m     total:247  pass:226  dwarn:0   dfail:0   fail:0   skip:21 
fi-ivb-3770      total:247  pass:226  dwarn:0   dfail:0   fail:0   skip:21 
fi-kbl-7500u     total:247  pass:226  dwarn:0   dfail:0   fail:0   skip:21 
fi-skl-6260u     total:247  pass:234  dwarn:0   dfail:0   fail:0   skip:13 
fi-skl-6700hq    total:247  pass:227  dwarn:0   dfail:0   fail:0   skip:20 
fi-skl-6700k     total:247  pass:224  dwarn:3   dfail:0   fail:0   skip:20 
fi-skl-6770hq    total:247  pass:234  dwarn:0   dfail:0   fail:0   skip:13 
fi-snb-2520m     total:247  pass:216  dwarn:0   dfail:0   fail:0   skip:31 
fi-snb-2600      total:247  pass:215  dwarn:0   dfail:0   fail:0   skip:32 

9a2f9111a94a851e53bad3fd6a92f77dbd3a95e2 drm-tip: 2016y-12m-10d-00h-40m-18s UTC integration manifest
1572855 drm/i915: Add support for DP Video pattern compliance tests
15c877b drm: Add definitions for DP compliance Video pattern tests
a809fe2 drm/i915: Fixes to support DP Compliance EDID tests
1ea3741 drm/i915: Add support for DP link training compliance
af84a97 drm/i915: Move all the DP compliance data to a separate struct

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_3260/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx