intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org, Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: Re: [PATCH] drm/i915/gen9+: Rely on VBT DDI port info for eDP detection
Date: Tue, 20 Dec 2016 17:31:15 +0200	[thread overview]
Message-ID: <20161220153115.GY31595@intel.com> (raw)
In-Reply-To: <1482246769-4624-1-git-send-email-imre.deak@intel.com>

On Tue, Dec 20, 2016 at 05:12:49PM +0200, Imre Deak wrote:
> There is at least one APL based system using port A in DP mode
> (connecting to an on-board DP->VGA adaptor). Atm we'll configure port A
> unconditionally as eDP which is incorrect in this case. Fix this by
> relying on the VBT DDI port 'internal port' flag instead on all ports
> GEN9 onwards. For now chicken out from doing this on earlier DDI
> platforms too.
> 
> Signed-off-by: Imre Deak <imre.deak@intel.com>

Yeah, I think we should try to move towards using the VBT more
consistently here. Eventually we migth even want to unify everything to
using the pre-parsed port infromation, but going in babt steps is a
little less likely to regress old machines.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

At one point when I was monkeying around with this VBT stuff Paulo
suggested that we should just use the pre-parsed stuff more, so presumably
he should be happy with this direction as well. Although I think that
specific case might have been about the DP++ stuff.

> ---
>  drivers/gpu/drm/i915/i915_drv.h   | 1 +
>  drivers/gpu/drm/i915/intel_bios.c | 1 +
>  drivers/gpu/drm/i915/intel_dp.c   | 3 +++
>  3 files changed, 5 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 7e94e506..42fb7e9 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1669,6 +1669,7 @@ struct ddi_vbt_port_info {
>  	uint8_t supports_dvi:1;
>  	uint8_t supports_hdmi:1;
>  	uint8_t supports_dp:1;
> +	uint8_t supports_edp:1;
>  
>  	uint8_t alternate_aux_channel;
>  	uint8_t alternate_ddc_pin;
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index 1cf2fa6..60fdd31 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -1161,6 +1161,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
>  	info->supports_dvi = is_dvi;
>  	info->supports_hdmi = is_hdmi;
>  	info->supports_dp = is_dp;
> +	info->supports_edp = is_edp;
>  
>  	DRM_DEBUG_KMS("Port %c VBT info: DP:%d HDMI:%d DVI:%d EDP:%d CRT:%d\n",
>  		      port_name(port), is_dp, is_hdmi, is_dvi, is_edp, is_crt);
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index d37cb00..7f3f4fa 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -4983,6 +4983,9 @@ bool intel_dp_is_edp(struct drm_i915_private *dev_priv, enum port port)
>  	if (INTEL_GEN(dev_priv) < 5)
>  		return false;
>  
> +	if (INTEL_GEN(dev_priv) >= 9)
> +		return dev_priv->vbt.ddi_port_info[port].supports_edp;
> +
>  	if (port == PORT_A)
>  		return true;
>  
> -- 
> 2.5.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-12-20 15:31 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-20 15:12 [PATCH] drm/i915/gen9+: Rely on VBT DDI port info for eDP detection Imre Deak
2016-12-20 15:31 ` Ville Syrjälä [this message]
2016-12-20 16:02 ` David Weinehall
2016-12-20 16:34   ` Imre Deak
2016-12-21  8:34     ` Jani Nikula
2016-12-21 10:03       ` Imre Deak
2016-12-20 17:45 ` ✗ Fi.CI.BAT: warning for " Patchwork
2016-12-21 10:17 ` [PATCH v2] drm/i915/ddi: " Imre Deak
2016-12-21 11:21   ` Jani Nikula
2016-12-21 11:50     ` Imre Deak
2016-12-21 11:56       ` Jani Nikula
2016-12-22  9:12   ` David Weinehall
2016-12-22 12:28     ` Imre Deak
2016-12-21 10:56 ` ✗ Fi.CI.BAT: failure for drm/i915/gen9+: Rely on VBT DDI port info for eDP detection (rev2) Patchwork
2016-12-21 12:15   ` Imre Deak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161220153115.GY31595@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).