From: Daniel Vetter <daniel@ffwll.ch>
To: vathsala nagaraju <vathsala.nagaraju@intel.com>
Cc: intel-gfx@lists.freedesktop.org,
Patil Deepti <deepti.patil@intel.com>,
dri-devel@lists.freedesktop.org,
Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: Re: [PATCH 01/10] drm : adds Y-coordinate and Colorimetry Format
Date: Mon, 2 Jan 2017 09:18:53 +0100 [thread overview]
Message-ID: <20170102081853.GQ8712@dvetter-linux.ger.corp.intel.com> (raw)
In-Reply-To: <1483150718-26273-1-git-send-email-vathsala.nagaraju@intel.com>
On Sat, Dec 31, 2016 at 07:48:38AM +0530, vathsala nagaraju wrote:
> PSR2 vsc revision number hb2( as per table 6-11)is updated to
> 4 or 5 based on Y cordinate and Colorimetry Format as below
> 04h = 3D stereo + PSR/PSR2 + Y-coordinate.
> 05h = -3D stereo- + PSR/PSR2 + Y-coordinate + Pixel Encoding/Colorimetry
> Format indication. A DP Source device is allowed to indicate the pixel
> encoding/colorimetry format to the DP Sink device with VSC SDP only when
> the DP Sink device supports it (
> i.e.,VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in the
> DPRX_FEATURE_ENUMERATION_LIST register (DPCD Address 02210h, bit 3;
> is set to 1).
>
> v2: (Jani)
> - Change DP_PSR_Y_COORDINATE to DP_PSR2_SU_Y_COORDINATE_REQUIRED.
> - Add DP_PSR2_SU_GRANULARITY_REQUIRED.
> - Change DPRX_FEATURE_ENUMERATION_LIST to DP_DPRX.
> - Add GTC_CAP and AV_SYNC_CAP, other bits in DPRX_FEATURE_ENUMERATION_LIST.
>
> v3: (Jani)
> - Add support for bits 7:4 and 1 as per DP v1.4 for
> DPRX_FEATURE_ENUMERATION_LIST.
>
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Cc: Jim Bride <jim.bride@linux.intel.com>
> Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
> Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Please cc the entire patch series to all mailing lists, so that people
have the full context.
Thanks, Daniel
> ---
> include/drm/drm_dp_helper.h | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 55bbeb0..0468135 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -194,7 +194,8 @@
> # define DP_PSR_SETUP_TIME_0 (6 << 1)
> # define DP_PSR_SETUP_TIME_MASK (7 << 1)
> # define DP_PSR_SETUP_TIME_SHIFT 1
> -
> +# define DP_PSR2_SU_Y_COORDINATE_REQUIRED (1 << 4) /* eDP 1.4a */
> +# define DP_PSR2_SU_GRANULARITY_REQUIRED (1 << 5) /* eDP 1.4b */
> /*
> * 0x80-0x8f describe downstream port capabilities, but there are two layouts
> * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not,
> @@ -568,6 +569,16 @@
> #define DP_RECEIVER_ALPM_STATUS 0x200b /* eDP 1.4 */
> # define DP_ALPM_LOCK_TIMEOUT_ERROR (1 << 0)
>
> +#define DP_DPRX_FEATURE_ENUMERATION_LIST 0x2210 /* DP 1.3 */
> +# define DP_GTC_CAP (1 << 0) /* DP 1.3 */
> +# define DP_SST_SPLIT_SDP_CAP (1 << 1) /* DP 1.4 */
> +# define DP_AV_SYNC_CAP (1 << 2) /* DP 1.3 */
> +# define DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED (1 << 3) /* DP 1.3 */
> +# define DP_VSC_EXT_VESA_SDP_SUPPORTED (1 << 4) /* DP 1.4 */
> +# define DP_VSC_EXT_VESA_SDP_CHAINING_SUPPORTED (1 << 5) /* DP 1.4 */
> +# define DP_VSC_EXT_CEA_SDP_SUPPORTED (1 << 6) /* DP 1.4 */
> +# define DP_VSC_EXT_CEA_SDP_CHAINING_SUPPORTED (1 << 7) /* DP 1.4 */
> +
> /* DP 1.2 Sideband message defines */
> /* peer device type - DP 1.2a Table 2-92 */
> #define DP_PEER_DEVICE_NONE 0x0
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-01-02 8:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-31 2:18 [PATCH 01/10] drm : adds Y-coordinate and Colorimetry Format vathsala nagaraju
2017-01-02 8:18 ` Daniel Vetter [this message]
[not found] ` <DFCE9515A6E7D340BE366A94B943DE134F88144E@BGSMSX103.gar.corp.intel.com>
2017-01-02 9:17 ` Daniel Vetter
2017-01-02 8:34 ` Jani Nikula
-- strict thread matches above, loose matches on Subject: below --
2017-01-02 11:30 [PATCH 00/10] enable psr2 for idle_screen on y-cordinate panel vathsala nagaraju
2017-01-02 11:30 ` [PATCH 01/10] drm : adds Y-coordinate and Colorimetry Format vathsala nagaraju
2016-12-30 5:25 [PATCH 00/10] enable psr2 for idle_screen on y-cordinate panel vathsala nagaraju
2016-12-30 5:25 ` [PATCH 01/10] drm : adds Y-coordinate and Colorimetry Format vathsala nagaraju
2016-12-30 19:05 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170102081853.GQ8712@dvetter-linux.ger.corp.intel.com \
--to=daniel@ffwll.ch \
--cc=deepti.patil@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
--cc=vathsala.nagaraju@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox