From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Hans de Goede <hdegoede@redhat.com>
Cc: Wolfram Sang <wsa@the-dreams.de>,
"russianneuromancer @ ya . ru" <russianneuromancer@ya.ru>,
intel-gfx <intel-gfx@lists.freedesktop.org>,
linux-i2c@vger.kernel.org,
Jarkko Nikula <jarkko.nikula@linux.intel.com>,
dri-devel@lists.freedesktop.org,
"H . Peter Anvin" <hpa@zytor.com>,
Daniel Vetter <daniel.vetter@intel.com>,
Thomas Gleixner <tglx@linutronix.de>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Len Brown <lenb@kernel.org>
Subject: Re: [PATCH v3 12/12] drm/i915: Listen for PMIC bus access notifications
Date: Thu, 16 Feb 2017 20:44:49 +0200 [thread overview]
Message-ID: <20170216184449.GN31595@intel.com> (raw)
In-Reply-To: <20170210102802.20898-13-hdegoede@redhat.com>
On Fri, Feb 10, 2017 at 11:28:02AM +0100, Hans de Goede wrote:
> Listen for PMIC bus access notifications and get FORCEWAKE_ALL while
> the bus is accessed to avoid needing to do any forcewakes, which need
> PMIC bus access, while the PMIC bus is busy:
>
> This fixes errors like these showing up in dmesg, usually followed
> by a gfx or system freeze:
>
> [drm:fw_domains_get [i915]] *ERROR* render: timed out waiting for forcewake ack request.
> [drm:fw_domains_get [i915]] *MEDIA* render: timed out waiting for forcewake ack request.
> i2c_designware 808622C1:06: punit semaphore timed out, resetting
> i2c_designware 808622C1:06: PUNIT SEM: 2
> i2c_designware 808622C1:06: couldn't acquire bus ownership
>
> Downside of this approach is that it causes wakeups whenever the PMIC
> bus is accessed. Unfortunately we cannot simply wait for the PMIC bus
> to go idle when we hit a race, as forcewakes may be done from interrupt
> handlers where we cannot sleep to wait for the i2c PMIC bus access to
> finish.
>
> Note that the notifications and thus the wakeups will only happen on
> baytrail / cherrytrail devices using PMICs with a shared i2c bus for
> P-Unit and host PMIC access (i2c busses with a _SEM method in their
> APCI node), e.g. an axp288 PMIC.
>
> I plan to write some patches for drivers accessing the PMIC bus to
> limit their bus accesses to a bare minimum (e.g. cache registers, do not
> update battery level more often then 4 times a minute), to limit the
> amount of wakeups.
>
> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> Tested-by: tagorereddy <tagore.chandan@gmail.com>
I gave the previous versions a quick whirl on a few machines here, but
them not being CR versions I guess this stuff doesn't kick in at all.
And I don't see any _SEM stuff in the DSDT/SSDT, so I guess that
confirms it. Which is fine since I've not seem any stability issues
on those machines. So at least nothing seemed to break :)
Anyways the changes look all right to me, so for both i915 patches
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> Changes in v2:
> -Spelling: P-Unit, PMIC
> Changes in v3:
> -Improve comment explaining why we call intel_uncore_forcewake_get(ALL) on
> MBI_PMIC_BUS_ACCESS_BEGIN notification
> ---
> drivers/gpu/drm/i915/Kconfig | 1 +
> drivers/gpu/drm/i915/i915_drv.h | 1 +
> drivers/gpu/drm/i915/intel_uncore.c | 39 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 41 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/Kconfig b/drivers/gpu/drm/i915/Kconfig
> index 1ae0bb9..a5cd5da 100644
> --- a/drivers/gpu/drm/i915/Kconfig
> +++ b/drivers/gpu/drm/i915/Kconfig
> @@ -20,6 +20,7 @@ config DRM_I915
> select ACPI_VIDEO if ACPI
> select ACPI_BUTTON if ACPI
> select SYNC_FILE
> + select IOSF_MBI
> help
> Choose this option if you have a system that has "Intel Graphics
> Media Accelerator" or "HD Graphics" integrated graphics,
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 998239f..4e405d0 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -725,6 +725,7 @@ struct intel_uncore {
> const struct intel_forcewake_range *fw_domains_table;
> unsigned int fw_domains_table_entries;
>
> + struct notifier_block pmic_bus_access_nb;
> struct intel_uncore_funcs funcs;
>
> unsigned fifo_count;
> diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
> index b6d726b..1be3cdc 100644
> --- a/drivers/gpu/drm/i915/intel_uncore.c
> +++ b/drivers/gpu/drm/i915/intel_uncore.c
> @@ -25,6 +25,7 @@
> #include "intel_drv.h"
> #include "i915_vgpu.h"
>
> +#include <asm/iosf_mbi.h>
> #include <linux/pm_runtime.h>
>
> #define FORCEWAKE_ACK_TIMEOUT_MS 50
> @@ -436,12 +437,16 @@ static void __intel_uncore_early_sanitize(struct drm_i915_private *dev_priv,
>
> void intel_uncore_suspend(struct drm_i915_private *dev_priv)
> {
> + iosf_mbi_unregister_pmic_bus_access_notifier(
> + &dev_priv->uncore.pmic_bus_access_nb);
> intel_uncore_forcewake_reset(dev_priv, false);
> }
>
> void intel_uncore_resume_early(struct drm_i915_private *dev_priv)
> {
> __intel_uncore_early_sanitize(dev_priv, true);
> + iosf_mbi_register_pmic_bus_access_notifier(
> + &dev_priv->uncore.pmic_bus_access_nb);
> i915_check_and_clear_faults(dev_priv);
> }
>
> @@ -1329,6 +1334,32 @@ static void intel_uncore_fw_domains_init(struct drm_i915_private *dev_priv)
> dev_priv->uncore.fw_domains_table_entries = ARRAY_SIZE((d)); \
> }
>
> +static int i915_pmic_bus_access_notifier(struct notifier_block *nb,
> + unsigned long action, void *data)
> +{
> + struct drm_i915_private *dev_priv = container_of(nb,
> + struct drm_i915_private, uncore.pmic_bus_access_nb);
> +
> + switch (action) {
> + case MBI_PMIC_BUS_ACCESS_BEGIN:
> + /*
> + * forcewake all now to make sure that we don't need to do a
> + * forcewake later which on systems where this notifier gets
> + * called requires the punit to access to the shared pmic i2c
> + * bus, which will be busy after this notification, leading to:
> + * "render: timed out waiting for forcewake ack request."
> + * errors.
> + */
> + intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
> + break;
> + case MBI_PMIC_BUS_ACCESS_END:
> + intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
> + break;
> + }
> +
> + return NOTIFY_OK;
> +}
> +
> void intel_uncore_init(struct drm_i915_private *dev_priv)
> {
> i915_check_vgpu(dev_priv);
> @@ -1338,6 +1369,8 @@ void intel_uncore_init(struct drm_i915_private *dev_priv)
> __intel_uncore_early_sanitize(dev_priv, false);
>
> dev_priv->uncore.unclaimed_mmio_check = 1;
> + dev_priv->uncore.pmic_bus_access_nb.notifier_call =
> + i915_pmic_bus_access_notifier;
>
> switch (INTEL_INFO(dev_priv)->gen) {
> default:
> @@ -1392,6 +1425,9 @@ void intel_uncore_init(struct drm_i915_private *dev_priv)
> if (INTEL_GEN(dev_priv) >= 8)
> intel_shadow_table_check();
>
> + iosf_mbi_register_pmic_bus_access_notifier(
> + &dev_priv->uncore.pmic_bus_access_nb);
> +
> i915_check_and_clear_faults(dev_priv);
> }
> #undef ASSIGN_WRITE_MMIO_VFUNCS
> @@ -1399,6 +1435,9 @@ void intel_uncore_init(struct drm_i915_private *dev_priv)
>
> void intel_uncore_fini(struct drm_i915_private *dev_priv)
> {
> + iosf_mbi_unregister_pmic_bus_access_notifier(
> + &dev_priv->uncore.pmic_bus_access_nb);
> +
> /* Paranoia: make sure we have disabled everything before we exit. */
> intel_uncore_sanitize(dev_priv);
> intel_uncore_forcewake_reset(dev_priv, false);
> --
> 2.9.3
--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-02-16 18:44 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-10 10:27 [PATCH v3 00/12] coordinate cht i2c-pmic and i915-punit accesses Hans de Goede
2017-02-10 10:27 ` [PATCH v3 01/12] x86/platform/intel/iosf_mbi: Add a mutex for P-Unit access Hans de Goede
2017-02-10 10:27 ` [PATCH v3 02/12] x86/platform/intel/iosf_mbi: Add a PMIC bus access notifier Hans de Goede
2017-02-10 10:27 ` [PATCH v3 03/12] i2c: designware: Rename accessor_flags to flags Hans de Goede
2017-02-10 10:27 ` [PATCH v3 04/12] i2c: designware-baytrail: Pass dw_i2c_dev into helper functions Hans de Goede
2017-02-10 10:27 ` [PATCH v3 05/12] i2c: designware-baytrail: Only check iosf_mbi_available() for shared hosts Hans de Goede
2017-02-10 10:27 ` [PATCH v3 06/12] i2c: designware-baytrail: Disallow the CPU to enter C6 or C7 while holding the punit semaphore Hans de Goede
2017-02-10 10:27 ` [PATCH v3 07/12] i2c: designware-baytrail: Fix race when resetting the semaphore Hans de Goede
2017-02-10 10:27 ` [PATCH v3 08/12] i2c: designware-baytrail: Add support for cherrytrail Hans de Goede
2017-02-10 10:27 ` [PATCH v3 09/12] i2c: designware-baytrail: Acquire P-Unit access on bus acquire Hans de Goede
2017-02-10 10:28 ` [PATCH v3 10/12] i2c: designware-baytrail: Call pmic_bus_access_notifier_chain Hans de Goede
2017-02-10 10:28 ` [PATCH v3 11/12] drm/i915: Add intel_uncore_suspend / resume functions Hans de Goede
2017-02-10 10:28 ` [PATCH v3 12/12] drm/i915: Listen for PMIC bus access notifications Hans de Goede
2017-02-16 18:44 ` Ville Syrjälä [this message]
2017-02-16 19:02 ` Jani Nikula
2017-02-20 8:29 ` Hans de Goede
2017-02-26 20:01 ` [Intel-gfx] " Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170216184449.GN31595@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=hdegoede@redhat.com \
--cc=hpa@zytor.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jarkko.nikula@linux.intel.com \
--cc=lenb@kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=russianneuromancer@ya.ru \
--cc=tglx@linutronix.de \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox