From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org, stable@vger.kernel.org
Subject: Re: [PATCH 1/7] drm/i915: Fix deadlock witha the pipe A quirk during resume
Date: Thu, 1 Jun 2017 19:01:07 +0300 [thread overview]
Message-ID: <20170601160107.GP12629@intel.com> (raw)
In-Reply-To: <87o9u7hii6.fsf@intel.com>
On Thu, Jun 01, 2017 at 05:47:45PM +0300, Jani Nikula wrote:
> On Thu, 01 Jun 2017, ville.syrjala@linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > Pass down the correct acquire context to the pipe A quirk load detect
> > hack during display resume. Avoids deadlocking the entire thing.
>
> Have we seen this in the wild? References?
My 830.
>
> BR,
> Jani.
>
> >
> > Cc: stable@vger.kernel.org
> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Fixes: e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.")
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 21 ++++++++++++---------
> > 1 file changed, 12 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index ed41b59ee8e3..2f76a63efe8c 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -120,7 +120,8 @@ static void intel_crtc_init_scalers(struct intel_crtc *crtc,
> > static void skylake_pfit_enable(struct intel_crtc *crtc);
> > static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
> > static void ironlake_pfit_enable(struct intel_crtc *crtc);
> > -static void intel_modeset_setup_hw_state(struct drm_device *dev);
> > +static void intel_modeset_setup_hw_state(struct drm_device *dev,
> > + struct drm_modeset_acquire_ctx *ctx);
> > static void intel_pre_disable_primary_noatomic(struct drm_crtc *crtc);
> >
> > struct intel_limit {
> > @@ -3461,7 +3462,7 @@ __intel_display_resume(struct drm_device *dev,
> > struct drm_crtc *crtc;
> > int i, ret;
> >
> > - intel_modeset_setup_hw_state(dev);
> > + intel_modeset_setup_hw_state(dev, ctx);
> > i915_redisable_vga(to_i915(dev));
> >
> > if (!state)
> > @@ -15094,7 +15095,7 @@ int intel_modeset_init(struct drm_device *dev)
> > intel_setup_outputs(dev_priv);
> >
> > drm_modeset_lock_all(dev);
> > - intel_modeset_setup_hw_state(dev);
> > + intel_modeset_setup_hw_state(dev, dev->mode_config.acquire_ctx);
> > drm_modeset_unlock_all(dev);
> >
> > for_each_intel_crtc(dev, crtc) {
> > @@ -15131,13 +15132,13 @@ int intel_modeset_init(struct drm_device *dev)
> > return 0;
> > }
> >
> > -static void intel_enable_pipe_a(struct drm_device *dev)
> > +static void intel_enable_pipe_a(struct drm_device *dev,
> > + struct drm_modeset_acquire_ctx *ctx)
> > {
> > struct intel_connector *connector;
> > struct drm_connector_list_iter conn_iter;
> > struct drm_connector *crt = NULL;
> > struct intel_load_detect_pipe load_detect_temp;
> > - struct drm_modeset_acquire_ctx *ctx = dev->mode_config.acquire_ctx;
> > int ret;
> >
> > /* We can't just switch on the pipe A, we need to set things up with a
> > @@ -15209,7 +15210,8 @@ static bool has_pch_trancoder(struct drm_i915_private *dev_priv,
> > (HAS_PCH_LPT_H(dev_priv) && pch_transcoder == TRANSCODER_A);
> > }
> >
> > -static void intel_sanitize_crtc(struct intel_crtc *crtc)
> > +static void intel_sanitize_crtc(struct intel_crtc *crtc,
> > + struct drm_modeset_acquire_ctx *ctx)
> > {
> > struct drm_device *dev = crtc->base.dev;
> > struct drm_i915_private *dev_priv = to_i915(dev);
> > @@ -15265,7 +15267,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
> > * resume. Force-enable the pipe to fix this, the update_dpms
> > * call below we restore the pipe to the right state, but leave
> > * the required bits on. */
> > - intel_enable_pipe_a(dev);
> > + intel_enable_pipe_a(dev, ctx);
> > }
> >
> > /* Adjust the state of the output pipe according to whether we
> > @@ -15568,7 +15570,8 @@ get_encoder_power_domains(struct drm_i915_private *dev_priv)
> > * and sanitizes it to the current state
> > */
> > static void
> > -intel_modeset_setup_hw_state(struct drm_device *dev)
> > +intel_modeset_setup_hw_state(struct drm_device *dev,
> > + struct drm_modeset_acquire_ctx *ctx)
> > {
> > struct drm_i915_private *dev_priv = to_i915(dev);
> > enum pipe pipe;
> > @@ -15588,7 +15591,7 @@ intel_modeset_setup_hw_state(struct drm_device *dev)
> > for_each_pipe(dev_priv, pipe) {
> > crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
> >
> > - intel_sanitize_crtc(crtc);
> > + intel_sanitize_crtc(crtc, ctx);
> > intel_dump_pipe_config(crtc, crtc->config,
> > "[setup_hw_state]");
> > }
>
> --
> Jani Nikula, Intel Open Source Technology Center
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-06-01 16:01 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-01 14:36 [PATCH 0/7] drm/i915: Pipe A quirk rework ville.syrjala
2017-06-01 14:36 ` [PATCH 1/7] drm/i915: Fix deadlock witha the pipe A quirk during resume ville.syrjala
2017-06-01 14:47 ` [Intel-gfx] " Jani Nikula
2017-06-01 16:01 ` Ville Syrjälä [this message]
2017-06-02 7:04 ` Jani Nikula
2017-06-01 14:36 ` [PATCH 2/7] drm/i915: Plumb the correct acquire ctx into intel_crtc_disable_noatomic() ville.syrjala
2017-06-01 14:48 ` [Intel-gfx] " Jani Nikula
2017-06-01 16:05 ` Ville Syrjälä
2017-06-01 17:07 ` [Intel-gfx] " Ville Syrjälä
2017-06-01 14:36 ` [PATCH 3/7] drm/i915: Use a loop for the "three times for luck" DPLL procedure ville.syrjala
2017-06-01 14:48 ` Chris Wilson
2017-06-01 16:14 ` Ville Syrjälä
2017-06-01 14:49 ` Jani Nikula
2017-06-01 14:36 ` [PATCH 4/7] drm/i915: Add i830 "pipes power well" ville.syrjala
2017-06-01 14:46 ` Chris Wilson
2017-06-01 16:25 ` Ville Syrjälä
2017-06-06 7:04 ` Maarten Lankhorst
2017-06-06 10:32 ` Ville Syrjälä
2017-06-01 14:36 ` [PATCH 5/7] drm/i915: Drop pipe A quirk for Toshiba Protege R205-S209 ville.syrjala
2017-06-01 14:36 ` [PATCH 6/7] drm/i915: Drop pipe A quirk for Thinkapd T60 ville.syrjala
2017-06-01 14:36 ` [PATCH 7/7] drm/i915: Remove pipe A quirk remnants ville.syrjala
2017-06-01 14:41 ` [PATCH 0/7] drm/i915: Pipe A quirk rework Chris Wilson
2017-06-01 14:59 ` ✓ Fi.CI.BAT: success for " Patchwork
2017-06-15 13:16 ` [PATCH 0/7] " Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170601160107.GP12629@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).