From: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lyude <lyude@redhat.com>
Subject: [PATCH i-g-t 7/7] tests/chamelium: Disconnect connectors without extra reset
Date: Mon, 26 Jun 2017 16:59:06 +0300 [thread overview]
Message-ID: <20170626135906.32708-7-paul.kocialkowski@linux.intel.com> (raw)
In-Reply-To: <20170626135906.32708-1-paul.kocialkowski@linux.intel.com>
This removes the reset call from the reset_state function and renames it
to disconnect_connector. Since a call to reset is already done in
chamelium_init, there is no need to do an extra reset in each test.
This allows reducing the execution time a bit.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
---
tests/chamelium.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/tests/chamelium.c b/tests/chamelium.c
index 01ae4cd7..7d6893da 100644
--- a/tests/chamelium.c
+++ b/tests/chamelium.c
@@ -144,17 +144,17 @@ wait_for_connector(data_t *data, struct chamelium_port *port,
}
static void
-reset_state(data_t *data, struct chamelium_port *port)
+disconnect_connector(data_t *data, struct chamelium_port *port)
{
int p;
- chamelium_reset(data->chamelium);
-
if (port) {
+ chamelium_unplug(data->chamelium, port);
wait_for_connector(data, port, DRM_MODE_DISCONNECTED, false);
} else {
for (p = 0; p < data->port_count; p++) {
port = data->ports[p];
+ chamelium_unplug(data->chamelium, port);
wait_for_connector(data, port, DRM_MODE_DISCONNECTED,
false);
}
@@ -167,7 +167,7 @@ test_basic_hotplug(data_t *data, struct chamelium_port *port, int toggle_count)
struct udev_monitor *mon = igt_watch_hotplug();
int i;
- reset_state(data, NULL);
+ disconnect_connector(data, NULL);
igt_hpd_storm_set_threshold(data->drm_fd, 0);
for (i = 0; i < toggle_count; i++) {
@@ -201,7 +201,7 @@ test_edid_read(data_t *data, struct chamelium_port *port,
data->chamelium, port, false);
uint64_t edid_blob_id;
- reset_state(data, port);
+ disconnect_connector(data, port);
chamelium_port_set_edid(data->chamelium, port, edid_id);
chamelium_plug(data->chamelium, port);
@@ -270,7 +270,7 @@ test_suspend_resume_hpd(data_t *data, struct chamelium_port *port,
{
struct udev_monitor *mon = igt_watch_hotplug();
- reset_state(data, port);
+ disconnect_connector(data, port);
/* Make sure we notice new connectors after resuming */
try_suspend_resume_hpd(data, port, state, test, mon, false);
@@ -294,7 +294,7 @@ test_suspend_resume_hpd_common(data_t *data, enum igt_suspend_state state,
igt_debug("Testing port %s\n", chamelium_port_get_name(port));
}
- reset_state(data, NULL);
+ disconnect_connector(data, NULL);
/* Make sure we notice new connectors after resuming */
try_suspend_resume_hpd(data, NULL, state, test, mon, false);
@@ -315,7 +315,7 @@ test_suspend_resume_edid_change(data_t *data, struct chamelium_port *port,
struct udev_monitor *mon = igt_watch_hotplug();
int delay = chamelium_get_suspend_resume_delay(data->chamelium);
- reset_state(data, port);
+ disconnect_connector(data, port);
igt_set_autoresume_delay(delay);
@@ -585,7 +585,7 @@ test_hpd_without_ddc(data_t *data, struct chamelium_port *port)
{
struct udev_monitor *mon = igt_watch_hotplug();
- reset_state(data, port);
+ disconnect_connector(data, port);
igt_flush_hotplugs(mon);
/* Disable the DDC on the connector and make sure we still get a
@@ -607,7 +607,7 @@ test_hpd_storm_detect(data_t *data, struct chamelium_port *port, int width)
int count = 0;
igt_require_hpd_storm_ctl(data->drm_fd);
- reset_state(data, port);
+ disconnect_connector(data, port);
igt_hpd_storm_set_threshold(data->drm_fd, 1);
chamelium_fire_hpd_pulses(data->chamelium, port, width, 10);
@@ -632,7 +632,7 @@ static void
test_hpd_storm_disable(data_t *data, struct chamelium_port *port, int width)
{
igt_require_hpd_storm_ctl(data->drm_fd);
- reset_state(data, port);
+ disconnect_connector(data, port);
igt_hpd_storm_set_threshold(data->drm_fd, 0);
chamelium_fire_hpd_pulses(data->chamelium, port,
--
2.13.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-06-26 14:00 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-26 13:59 [PATCH i-g-t 1/7] tests/chamelium: Update connector state without reprobe when possible Paul Kocialkowski
2017-06-26 13:59 ` [PATCH i-g-t 2/7] tests/chamelium: Check all connectors state for basic hotplug Paul Kocialkowski
2017-06-26 21:35 ` Lyude Paul
2017-06-26 13:59 ` [PATCH i-g-t 3/7] tests/chamelium: Use 50 ms delay to wait for connector change Paul Kocialkowski
2017-06-26 21:36 ` Lyude Paul
2017-06-26 13:59 ` [PATCH i-g-t 4/7] lib/igt_chamelium: Add support for configurable DUT suspend/resume delay Paul Kocialkowski
2017-06-26 14:25 ` Martin Peres
2017-06-26 14:33 ` Paul Kocialkowski
2017-06-26 15:15 ` Martin Peres
2017-06-26 21:14 ` Lyude Paul
2017-06-27 7:33 ` Paul Kocialkowski
2017-06-27 7:45 ` Paul Kocialkowski
2017-06-27 10:16 ` Paul Kocialkowski
2017-06-26 13:59 ` [PATCH i-g-t 5/7] tests/chamelium: Use " Paul Kocialkowski
2017-06-26 13:59 ` [PATCH i-g-t 6/7] tests/chamelium: Reduce the simple hotplug test toggle count for VGA Paul Kocialkowski
2017-06-26 13:59 ` Paul Kocialkowski [this message]
2017-06-26 22:17 ` [PATCH i-g-t 7/7] tests/chamelium: Disconnect connectors without extra reset Lyude Paul
2017-06-27 7:22 ` Paul Kocialkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170626135906.32708-7-paul.kocialkowski@linux.intel.com \
--to=paul.kocialkowski@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=lyude@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).