public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Tvrtko Ursulin <tursulin@ursulin.net>
To: Intel-gfx@lists.freedesktop.org
Subject: [RFC 01/10] drm/i915: Convert intel_rc6_residency_us to ns
Date: Wed,  2 Aug 2017 13:32:41 +0100	[thread overview]
Message-ID: <20170802123249.14194-2-tvrtko.ursulin@linux.intel.com> (raw)
In-Reply-To: <20170802123249.14194-1-tvrtko.ursulin@linux.intel.com>

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Will be used for exposing the PMU counters.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h |  8 +++++++-
 drivers/gpu/drm/i915/intel_pm.c | 23 +++++++++--------------
 2 files changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 6383940e8d55..d47215e73405 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -4009,9 +4009,15 @@ void vlv_phy_reset_lanes(struct intel_encoder *encoder);
 
 int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
 int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
-u64 intel_rc6_residency_us(struct drm_i915_private *dev_priv,
+u64 intel_rc6_residency_ns(struct drm_i915_private *dev_priv,
 			   const i915_reg_t reg);
 
+static inline u64 intel_rc6_residency_us(struct drm_i915_private *dev_priv,
+					 const i915_reg_t reg)
+{
+	return DIV_ROUND_UP_ULL(intel_rc6_residency_ns(dev_priv, reg), 1000);
+}
+
 #define I915_READ8(reg)		dev_priv->uncore.funcs.mmio_readb(dev_priv, (reg), true)
 #define I915_WRITE8(reg, val)	dev_priv->uncore.funcs.mmio_writeb(dev_priv, (reg), (val), true)
 
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 48785ef75d33..bfbce74a4013 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -9179,10 +9179,10 @@ static u64 vlv_residency_raw(struct drm_i915_private *dev_priv,
 	return lower | (u64)upper << 8;
 }
 
-u64 intel_rc6_residency_us(struct drm_i915_private *dev_priv,
+u64 intel_rc6_residency_ns(struct drm_i915_private *dev_priv,
 			   const i915_reg_t reg)
 {
-	u64 time_hw, units, div;
+	u64 res;
 
 	if (!intel_enable_rc6())
 		return 0;
@@ -9191,22 +9191,17 @@ u64 intel_rc6_residency_us(struct drm_i915_private *dev_priv,
 
 	/* On VLV and CHV, residency time is in CZ units rather than 1.28us */
 	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
-		units = 1000;
-		div = dev_priv->czclk_freq;
+		res = vlv_residency_raw(dev_priv, reg);
+		res = DIV_ROUND_UP_ULL(res * 1000000, dev_priv->czclk_freq);
 
-		time_hw = vlv_residency_raw(dev_priv, reg);
-	} else if (IS_GEN9_LP(dev_priv)) {
-		units = 1000;
-		div = 1200;		/* 833.33ns */
-
-		time_hw = I915_READ(reg);
 	} else {
-		units = 128000; /* 1.28us */
-		div = 100000;
+		/* 833.33ns units on Gen9LP, 1.28us elsewhere. */
+		unsigned int unit = IS_GEN9_LP(dev_priv) ? 833 : 1280;
 
-		time_hw = I915_READ(reg);
+		res = (u64)I915_READ(reg) * unit;
 	}
 
 	intel_runtime_pm_put(dev_priv);
-	return DIV_ROUND_UP_ULL(time_hw * units, div);
+
+	return res;
 }
-- 
2.9.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2017-08-02 12:32 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-02 12:32 [RFC v2 00/10] i915 PMU and engine busy stats Tvrtko Ursulin
2017-08-02 12:32 ` Tvrtko Ursulin [this message]
2017-08-02 12:32 ` [RFC 02/10] drm/i915: Add intel_energy_uJ Tvrtko Ursulin
2017-08-02 12:32 ` [RFC 03/10] drm/i915: Extract intel_get_cagf Tvrtko Ursulin
2017-08-02 12:32 ` [RFC 04/10] drm/i915: Expose a PMU interface for perf queries Tvrtko Ursulin
2017-08-02 13:00   ` Tvrtko Ursulin
2017-08-12  2:15     ` Rogozhkin, Dmitry V
2017-08-22 18:17       ` Peter Zijlstra
2017-08-23 17:51         ` Rogozhkin, Dmitry V
2017-08-23 18:01           ` Peter Zijlstra
2017-08-23 18:40             ` Rogozhkin, Dmitry V
2017-08-23 18:04           ` Peter Zijlstra
2017-08-23 18:38             ` Rogozhkin, Dmitry V
2017-08-23 19:28               ` Peter Zijlstra
2017-08-23 18:05           ` Peter Zijlstra
2017-08-23 18:22           ` Peter Zijlstra
2017-08-23 19:00             ` Rogozhkin, Dmitry V
2017-08-23 19:33               ` Peter Zijlstra
2017-08-28 22:57             ` Rogozhkin, Dmitry V
2017-08-29  9:30               ` Peter Zijlstra
2017-08-29 19:16                 ` Rogozhkin, Dmitry V
2017-08-29 19:21                   ` Peter Zijlstra
2017-09-13 23:05                     ` Rogozhkin, Dmitry V
2017-09-20 20:14                       ` Rogozhkin, Dmitry V
2017-10-02 21:28                         ` Rogozhkin, Dmitry V
2017-08-02 12:32 ` [RFC 05/10] drm/i915/pmu: Suspend sampling when GPU is idle Tvrtko Ursulin
2017-08-02 12:32 ` [RFC 06/10] drm/i915: Wrap context schedule notification Tvrtko Ursulin
2017-08-02 12:32 ` [RFC 07/10] drm/i915: Engine busy time tracking Tvrtko Ursulin
2017-08-02 12:32 ` [RFC 08/10] drm/i915: Export engine busy stats in debugfs Tvrtko Ursulin
2017-08-02 12:32 ` [RFC 09/10] drm/i915/pmu: Wire up engine busy stats to PMU Tvrtko Ursulin
2017-08-02 12:39 ` [RFC 10/10] drm/i915: Gate engine stats collection with a static key Tvrtko Ursulin
2017-08-02 12:56 ` ✗ Fi.CI.BAT: warning for i915 PMU and engine busy stats (rev2) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170802123249.14194-2-tvrtko.ursulin@linux.intel.com \
    --to=tursulin@ursulin.net \
    --cc=Intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox