From: Jani Nikula <jani.nikula@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: jani.nikula@intel.com, "# v4 . 12+" <stable@vger.kernel.org>,
Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH] drm/i915/vbt: ignore extraneous child devices for a port
Date: Fri, 11 Aug 2017 14:39:07 +0300 [thread overview]
Message-ID: <20170811113907.6716-1-jani.nikula@intel.com> (raw)
Ever since we've parsed VBT child devices, starting from 6acab15a7b0d
("drm/i915: use the HDMI DDI buffer translations from VBT"), we've
ignored the child device information if more than one child device
references the same port. The rationale for this seems lost in time.
Since commit 311a20949f04 ("drm/i915: don't init DP or HDMI when not
supported by DDI port") we started using this information more to skip
HDMI/DP init if the port wasn't there per VBT child devices. However, at
the same time it added port defaults without further explanation.
Thus, if the child device info was skipped due to multiple child devices
referencing the same port, the device info would be retrieved from the
somewhat arbitrary defaults.
Finally, when commit bb1d132935c2 ("drm/i915/vbt: split out defaults
that are set when there is no VBT") stopped initializing the defaults
whenever VBT is present, thus trusting the VBT more, we stopped
initializing ports which were referenced by more than one child device.
Apparently at least Asus UX305UA, UX305U, and UX306U laptops have VBT
child device blocks which cause this behaviour. Arguably they were
shipped with a broken VBT.
Relax the rules for multiple references to the same port, and use the
first child device info to reference a port. Retain the logic to debug
log about this, though.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101745
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196233
Fixes: bb1d132935c2 ("drm/i915/vbt: split out defaults that are set when there is no VBT")
Tested-by: Oliver Weißbarth <mail@oweissbarth.de>
Reported-by: Oliver Weißbarth <mail@oweissbarth.de>
Reported-by: Didier G <didierg-divers@orange.fr>
Reported-by: Giles Anderson <agander@gmail.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
drivers/gpu/drm/i915/intel_bios.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 82b144cdfa1d..183e87e8ea31 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -1120,8 +1120,8 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
bool is_dvi, is_hdmi, is_dp, is_edp, is_crt;
uint8_t aux_channel, ddc_pin;
/* Each DDI port can have more than one value on the "DVO Port" field,
- * so look for all the possible values for each port and abort if more
- * than one is found. */
+ * so look for all the possible values for each port.
+ */
int dvo_ports[][3] = {
{DVO_PORT_HDMIA, DVO_PORT_DPA, -1},
{DVO_PORT_HDMIB, DVO_PORT_DPB, -1},
@@ -1130,7 +1130,10 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
{DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE},
};
- /* Find the child device to use, abort if more than one found. */
+ /*
+ * Find the first child device to reference the port, report if more
+ * than one found.
+ */
for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
it = dev_priv->vbt.child_dev + i;
@@ -1140,11 +1143,11 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
if (it->common.dvo_port == dvo_ports[port][j]) {
if (child) {
- DRM_DEBUG_KMS("More than one child device for port %c in VBT.\n",
+ DRM_DEBUG_KMS("More than one child device for port %c in VBT, using the first.\n",
port_name(port));
- return;
+ } else {
+ child = it;
}
- child = it;
}
}
}
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2017-08-11 11:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-11 11:39 Jani Nikula [this message]
2017-08-11 12:01 ` ✓ Fi.CI.BAT: success for drm/i915/vbt: ignore extraneous child devices for a port Patchwork
2017-08-14 23:02 ` [PATCH] " Manasi Navare
2017-08-15 7:26 ` Jani Nikula
2017-08-16 14:33 ` Ville Syrjälä
2017-08-16 14:46 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170811113907.6716-1-jani.nikula@intel.com \
--to=jani.nikula@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox