[PATCH] drm/i915/gen9+: Set same power state before hibernation image save/restore

[Imre Deak <imre.deak@intel.com>]

Atm, on GEN9 big core platforms before saving the hibernation image we
uninitialize the display, disabling power wells manually, while before
restoring the image we keep things powered (letting HW/DMC power down
things as needed). The state mismatch will trigger the following error:

DC state mismatch (0x0 -> 0x2)

While the restore handler knows how to initialize the display from an
unknown state (due to a different loader kernel or not having i915
loaded in the loader kernel) we should still use the same state for
consistency before image saving and restoring. Do this by uniniting the
display before restoring the image too.

Bugzilla: https://bugs.freedesktop.org/attachment.cgi?id=133376
Reported-and-tested-by: Wang Wendy <wendy.wang@intel.com>
Reported-and-tested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Wang Wendy <wendy.wang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

---

[ No Fixes: line, since I'm not aware of any other issues caused by this
  besides the error message. ]
---
 drivers/gpu/drm/i915/i915_drv.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 43100229613c..d816ba715cb6 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1571,7 +1571,7 @@ static int i915_drm_suspend_late(struct drm_device *dev, bool hibernation)
 
 	intel_display_set_init_power(dev_priv, false);
 
-	fw_csr = !IS_GEN9_LP(dev_priv) &&
+	fw_csr = !IS_GEN9_LP(dev_priv) && !hibernation &&
 		suspend_to_idle(dev_priv) && dev_priv->csr.dmc_payload;
 	/*
 	 * In case of firmware assisted context save/restore don't manually
@@ -2055,11 +2055,14 @@ static int i915_pm_resume(struct device *kdev)
 /* freeze: before creating the hibernation_image */
 static int i915_pm_freeze(struct device *kdev)
 {
+	struct drm_device *dev = &kdev_to_i915(kdev)->drm;
 	int ret;
 
-	ret = i915_pm_suspend(kdev);
-	if (ret)
-		return ret;
+	if (dev->switch_power_state != DRM_SWITCH_POWER_OFF) {
+		ret = i915_drm_suspend(dev);
+		if (ret)
+			return ret;
+	}
 
 	ret = i915_gem_freeze(kdev_to_i915(kdev));
 	if (ret)
@@ -2070,11 +2073,14 @@ static int i915_pm_freeze(struct device *kdev)
 
 static int i915_pm_freeze_late(struct device *kdev)
 {
+	struct drm_device *dev = &kdev_to_i915(kdev)->drm;
 	int ret;
 
-	ret = i915_pm_suspend_late(kdev);
-	if (ret)
-		return ret;
+	if (dev->switch_power_state != DRM_SWITCH_POWER_OFF) {
+		ret = i915_drm_suspend_late(dev, true);
+		if (ret)
+			return ret;
+	}
 
 	ret = i915_gem_freeze_late(kdev_to_i915(kdev));
 	if (ret)
-- 
2.13.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx